Effects of post-annealing and temperature/humidity treatments on the interfacial adhesion energy of the Cu/SiNx interface for Cu interconnects

被引：4

作者：

Jeong, Minsu ^{[1
]}

Bae, Byung-Hyun ^{[1
]}

Lee, Hyeonchul ^{[1
]}

Kang, Hee-Oh ^{[2
]}

Hwang, Wook-Jung ^{[2
]}

Yang, Jun-Mo ^{[2
]}

Park, Young-Bae ^{[1
]}

机构：

[1] Andong Natl Univ, Sch Mat Sci & Engn, Andong 36729, Gyeongbuk, South Korea

[2] Natl Nanofab Ctr, Daejeon 34141, South Korea

来源：

JAPANESE JOURNAL OF APPLIED PHYSICS | 2016年 / 55卷 / 06期

基金：

新加坡国家研究基金会;

关键词：

DAMASCENE CU; THIN-FILMS; ELECTROMIGRATION; GROWTH; RELIABILITY; OXIDATION; LAYER; TSV;

D O I：

10.7567/JJAP.55.06JD01

中图分类号：

O59 [应用物理学];

学科分类号：

摘要：

The effects of 200 degrees C post-annealing and 85 degrees C and 85% relative humidity temperature and humidity (T/H) treatments on the interfacial adhesion energy of a Cu/SiNx interface were systematically investigated. The results of a four-point bending test, X-ray photoemission spectroscopy, and high-resolution transmission electron microscopy revealed that the interfacial adhesion energy during T/H treatment decreased with time faster than during annealing treatment, which is closely related to the faster Cu oxidation of SiNx/Cu interfaces. (C) 2016 The Japan Society of Applied Physics

引用

页数：5

共 40 条

[31] Effects of annealing temperature on interface microstructure and element diffusion of ultra-thin Cu/Al composite sheets
Chen, Dege
Zhang, Hongmei
Zhao, Dadong
Liu, Yingyi
Jiang, Zhengyi
MATERIALS LETTERS, 2022, 322
[32] Investigation of precursor sequence and post-annealing effects on the properties of Cu2SnZnSe4 thin films deposited by the elemental thermal evaporation
Bayrakli, O.
Terlemezoglu, M.
Gullu, H. H.
Parlak, M.
MATERIALS RESEARCH EXPRESS, 2017, 4 (08)
[33] Oxygen post-annealing effects on critical current properties of PLD-ErBa2Cu30Oy films grown at several substrate temperatures
Horii, S
Mukaida, M
Ichino, Y
Matsumoto, K
Ohazama, T
Ichinose, A
Yoshida, Y
Shimoyama, J
Kishio, K
PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, 2005, 426 : 1015 - 1020
[34] The importance of CeO2 growth temperature and its post-annealing for the improvement of the microwave surface resistance of DyBa2Cu3Oz films
Murugesan, M.
Obara, H.
Nakagawa, Y.
Yamasaki, H.
Kosaka, S.
JOURNAL OF CRYSTAL GROWTH, 2007, 304 (01) : 118 - 126
[35] Effect of Post-annealing Temperature on Microstructural, Morphological and Optical Properties of Sol-gel Spin Coated Cu Doped SnO2 Thin Films
Raju, T. Bhima
Kumar, B. Rajesh
Ramakrishna, Y.
BRAZILIAN JOURNAL OF PHYSICS, 2024, 54 (06)
[36] Effects of post-annealing on the infrared active phonon modes of low anisotropy (γ=5-11) Cu1-xTlxBa2Ca2Cu3O10-δ superconductor thin films
Khan, NA
Khurram, AA
Mazhar, M
PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, 2004, 407 (1-2): : 23 - 30
[37] Effects of annealing temperature on the interfacial microstructure and bonding strength of Cu/Al clad sheets produced by twin-roll casting and rolling
Mao, Zhiping
Xie, Jingpei
Wang, Aiqin
Wang, Wenyan
Ma, Douqin
Liu, Pei
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2020, 285 (285)
[38] Effects of Na2S treatment and post-annealing on Sn-rich Cu2ZnSnS4-based thin film solar cells
Momose, Noritaka
Htay, Myo Than
Mikoshiba, Naoki
Hashimoto, Yoshio
Ito, Kentaro
JAPANESE JOURNAL OF APPLIED PHYSICS, 2020, 59 (SC)
[39] Effects of the negative bias voltages and post-annealing process on the crystallization and martensite formation of Ti-Zr-Hf-Co-Ni-Cu high-entropy thin film
Zhang, Ruochen
Zhang, Xuexi
Qian, Mingfang
Liu, He
Mao, Pengyan
Tao, Shaohu
Guo, Cean
MATERIALS TODAY COMMUNICATIONS, 2024, 39
[40] The effects of the post-annealing temperature on the growth mechanism of Bi2Sr2Ca1Cu2O8+partial derivative thin films produced on MgO (100) single crystal substrates by pulsed laser deposition (PLD)
Nane, O.
Ozcelik, B.
Abukay, D.
JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 566 : 175 - 179

← 1 2 3 4 →