Effects of SiO2 and Al2O3 on the lattice parameter and CO gas reduction of CaO-containing dense wustite

被引:13
|
作者
Inami, T [1 ]
Suzuki, K [1 ]
机构
[1] Ibaraki Univ, Fac Engn, Hitachi, Ibaraki 3168511, Japan
关键词
wustite; CO gas reduction; chemical reaction rate constant; inter-diffusion constant; mixed-control model; lattice parameter; iron making;
D O I
10.2355/isijinternational.43.314
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
The effects of SiO2 and Al2O3 on the lattice parameter and the initial reduction rate of CaO-containing wustite were studied at 1 273 K. Wustite plates containing 0.5-2 mass% CaO, 0.2-2 mass% SiO2 and 1 mass% Al2O3 were prepared at the mass fractions of CaO/SiO2=0.5-5. The lattice parameter of CaO-SiO2- containing wustite decreased with decreasing CaO/SiO2 ratio at a constant CaO content. This corresponded to a decrease of the dissolved content of CaO in the wustite due to a formation of CaO-FeO-SiO2 Compounds. Similarly, the dissolved content of CaO decreased in CaO-SiO2-Al2O3-containing wustite. The process of CO gas reduction within the wustite phase field was traced with the lattice parameter measurement of the partially reduced samples and was analyzed with a-mixed-control model of chemical reaction at the surface and the solid state diffusion in the wustite. The chemical reaction rate constant, k', decreased with increasing the amount of SiO2 addition at a constant CaO content. The dependence of k' on SiO2 (and Al2O3) addition was in good accordance with the change in the dissolved content of CaO in the wustite owing to the formation of the compounds containing CaO. The inter-diffusion coefficient, (D) over tilde, tended to decrease slightly with increasing the amount of compound.
引用
收藏
页码:314 / 320
页数:7
相关论文
共 50 条
  • [11] ON THE RATE OF THE REDUCTION OF WUSTITE, MAGNETITE, AND HEMATITE CONTAINING Al2O3, CaO, AND MgO.
    Iguchi, Yoshiaki
    Inouye, Michio
    Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 1979, 65 (12): : 1692 - 1701
  • [12] AMPHOTERIC CHARACTER OF AL2O3 IN THE SYSTEM CAO AL2O3 SIO2
    NGUYEN, VL
    SILIKATY, 1989, 33 (04): : 357 - 365
  • [13] EFFECTS OF CAO AND SIO2 ON THE RATE OF H2 REDUCTION OF DENSE WUSTITE AND THE MORPHOLOGY OF PRODUCT IRON
    NAKAGAWA, H
    NISHIHARA, K
    ONO, Y
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1988, 74 (08): : 1554 - 1561
  • [14] Activities of Aluminum and Calcium Oxides in the CaO–Al2O3 and CaO–SiO2–Al2O3 Melts
    V. N. Nevidimov
    Yu. M. Durina
    S. A. Krasikov
    E. M. Zhilina
    A. S. Bykov
    Russian Metallurgy (Metally), 2022, 2022 : 134 - 141
  • [15] Activities of Aluminum and Calcium Oxides in the CaO–Al2O3 and CaO–SiO2–Al2O3 Melts
    Nevidimov, V.N.
    Durina, Yu. M.
    Krasikov, S.A.
    Zhilina, E.M.
    Bykov, A.S.
    Russian Metallurgy (Metally), 2022, 2022 (02) : 134 - 141
  • [16] Thermodynamic properties of liquid phase in the CaO•SiO2-CaO•Al2O3•2SiO2-2CaO•Al2O3•SiO2 system
    Fabrichnaya, OB
    Nerád, I
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2000, 20 (04) : 505 - 515
  • [17] Effect of Al2O3/SiO2 and CaO/Al2O3 ratios on wettability and structure of CaO–SiO2–Al2O3-based mold flux system
    Wan-lin Wang
    Er-zhuo Gao
    Le-jun Zhou
    Lei Zhang
    Huan Li
    Journal of Iron and Steel Research International, 2019, 26 : 355 - 364
  • [18] Viscosity of SiO2-CaO-Al2O3 Slag with Low Silica - Influence of CaO/Al2O3, SiO2/Al2O3 Ratio
    Siafakas, Dimitrios
    Matsushita, Taishi
    Jarfors, Anders Eric Wollmar
    Hakamada, Shinya
    Watanabe, Masahito
    ISIJ INTERNATIONAL, 2018, 58 (12) : 2180 - 2185
  • [19] EFFECTS OF CaO, MgO, Al2O3 AND SiO2 ON THE CARBOTHERMIC REDUCTION OF SYNTHETIC FeCr2O4
    Wang, Y.
    Wang, L.
    Chou, K. C.
    JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY, 2015, 51 (01) : 17 - 24
  • [20] THE STUDY ON THE INTERFACE REACTION CHARACTERISTICS OF DIFFERENT BINARY SLAG, CaO - MgO, Al2O3 - CaO, Al2O3 MgO, SiO2 - CaO, SiO2 - MgO
    Yin, R. R.
    He, Z. J.
    Qiu, S.
    Liu, J. H.
    Tian, C.
    Yuan, Y. Q.
    Zhang, J. H.
    METALURGIJA, 2019, 58 (1-2): : 15 - 18