Effect of apex angle variation on thermal and hydraulic performance of roughened triangular duct

被引：27

作者：

Goel, Varun ^{[1
]}

Guleria, Pankaj ^{[2
]}

Kumar, Rajneesh ^{[1
]}

机构：

[1] Natl Inst Technol, Hamirpur 177005, HP, India

[2] Bhushan Steels, Dhenkanal, Orissa, India

来源：

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER | 2017年 / 86卷

关键词：

Apex angle; Dimple shaped roughness; Triangular duct; Correlation; HEAT-TRANSFER; FORCED-CONVECTION; FRICTION CHARACTERISTICS; FLOW-THROUGH; ROUGHNESS ELEMENT; PRESSURE-DROP; LAMINAR;

D O I：

10.1016/j.icheatmasstransfer.2017.06.008

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

The experiments were performed to analyze the influence of apex angle on thermal and hydraulic characteristics of triangular duct for Reynolds number range from 2000 to 16,000. Four different triangular ducts of apex angle 30 degrees, 60 degrees, 90 degrees and 110 degrees were fabricated for the experimentation. The one side of the duct is roughened with dimple shaped roughness element. The both relative shortway length (s/e) and relative longway length (l/e) of dimple shaped roughened element was kept constant (i.e., 10) but relative roughness height (e/D) is varied from 0.016 to 0.038. Result shows that apex angle plays an important role in heat transfer. The experimental results are presented in a form of correlation for Nusselt number (Nu) and friction factor (f).

引用

页码：239 / 244

页数：6

共 50 条

[21] Effect of yaw angle on the performance characteristics of twin intake duct
Singh, S.N. (sidhnathsingh@hotmail.com), 1600, AIAA International, 12700 Sunrise Valley Drive, Suite 200Reston, VA, Virginia, Virginia 20191-5807, United States (54):
[22] Thermal and hydraulic performance of a rectangular duct with multiple V-shaped ribs
Olsson, CO
Sunden, B
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 1998, 120 (04): : 1072 - 1077
[23] Effect of Yaw Angle on the Performance Characteristics of Twin Intake Duct
Saha, K.
Singh, S. N.
Seshadri, V.
JOURNAL OF AIRCRAFT, 2017, 54 (03): : 1210 - 1215
[24] Effect of Apex Angle on the Flow and Heat Transfer in Triangular Porous Ducts with Iso-flux Boundary Conditions
Mortazavi, S. Negin
Hassanipour, Fatemeh
PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2011, VOL 10, PTS A AND B, 2012, : 89 - 97
[25] Analytical investigation on thermo hydraulic performance augmentation of triangular duct solar air heater integrated with wavy fins
Renald, Thomas C. J.
Somasundaram, P.
Matheswaran, M. M.
Gnanasekaran, N.
INTERNATIONAL JOURNAL OF GREEN ENERGY, 2023, 20 (05) : 544 - 554
[26] CFD analysis for the performance of cross-flow hydraulic turbine with the variation of blade angle
Choi, Y. D.
Lim, J. I.
Kim, C. G.
Kim, Y. T.
Lee, Y. H.
NEW TRENDS IN FLUID MECHANICS RESEARCH: PROCEEDINGS OF THE FIFTH INTERNATIONAL CONFERENCE ON FLUID MECHANICS, 2007, : 428 - +
[27] Thermal and hydraulic characteristics of a triangular duct using an Al2O3 nanofluid in a turbulent flow regime
Taamneh, Yazan
Kabeel, A. E.
Prakash, N.
Sathyamurthy, Ravishankar
Chamkha, Ali J.
HEAT TRANSFER-ASIAN RESEARCH, 2019, 48 (06): : 2639 - 2654
[28] The Effect of Contact Angle on Triangular Shape Interrupted Microchannel Heat Sinks Performance
Azmi, Mohd Irwan Mohd
Chuan, Yeoh Chit
Tokit, Ernie Mat
Razali, Nadlene
Abd Munir, Fudhail
Nordin, Mohd Nur Azmi
Nuri, Nur Rashid Mat
4TH INTERNATIONAL MEETING OF ADVANCES IN THERMOFLUIDS (IMAT 2011), PT 1 AND 2, 2012, 1440 : 1220 - 1226
[29] Effect of the variation of conical liner apex angle and explosive ignition point on shaped charge jet formation
Aksoy, IG
Sen, S
INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2003, 10 (05) : 381 - 389
[30] The angle of attack effect on thermal-hydraulic performance of a cam-shaped tube with constant heat flux in crossflow
Afshar, Kamran Salehi
Lavasani, Arash Mirabdolah
Abolfathi, Saman
Mobedi, Peyman
EXPERIMENTAL HEAT TRANSFER, 2023, 36 (04) : 548 - 563

← 1 2 3 4 5 →