Non-Destructive Evaluation of the Cutting Surface of Hardwood Finger Joints

被引:4
|
作者
Stolze, Hannes [1 ]
Gurnik, Michael [1 ]
Koddenberg, Tim [1 ]
Kroeger, Jonas [2 ]
Koehler, Robert [3 ]
Vioel, Wolfgang [3 ]
Militz, Holger [1 ]
机构
[1] Univ Goettingen, Fac Forest Sci & Forest Ecol, Wood Biol & Wood Prod, Buesgenweg 4, D-37077 Gottingen, Germany
[2] Univ Kassel, Inst Prod Technol & Logist, Dept Cutting & Joining Mfg Proc, Kurt Wolters Str 3, D-34125 Kassel, Germany
[3] Univ Appl Sci & Arts, Fac Engn & Hlth, Lab Laser & Plasma Technol, Von Ossietzky Str 99, D-37085 Gottingen, Germany
关键词
finger-jointing; hardwood; wood characterization; non-destructive evaluation; cutting surface; wettability; roughness; adhesive penetration; WOOD SURFACES; ROUGHNESS; WETTABILITY; ADHESION; STRENGTH;
D O I
10.3390/s22103855
中图分类号
O65 [分析化学];
学科分类号
070302 ; 081704 ;
摘要
In this study, the surface parameters wettability, roughness, and adhesive penetration, which are important for wood bonding, were investigated and evaluated utilizing non-destructive methods after different mechanical processing. For this purpose, beech and birch finger joints were prepared with different cutting combinations (three cutters with different sharpness levels and two feed rates) in an industrial process. Effects and interactions on the surface parameters resulting from the different cutting combinations were evaluated using three Full Factorial Designs. The various cutting parameters had a predominantly significant influence on the surface parameters. The effects and identified interactions highlight the complexity of the cutting surface and the importance of wood bonding. In this respect, a new finding is that with sharper cutters, higher contact angles of the adhesives occur. The methods (contact angle measurement, laser scanning microscopy, and brightfield microscopy) used were well suited to make effects visible and quantifiable, which can be of interest for the quality control of the wood processing industry. The results can help to better understand and evaluate the design of wood surfaces via machining and the bonding of hardwoods. Possibly the results can contribute to further standardizing the production of load-bearing hardwood finger joints and making them more efficient.
引用
收藏
页数:20
相关论文
共 50 条
  • [31] A non-destructive method for prestress evaluation
    Azizinamini, A
    Mehrabi, AB
    Keller, B
    Rohde, J
    BUILDING AN INTERNATIONAL COMMUNITY OF STRUCTURAL ENGINEERS, VOLS 1 AND 2, 1996, : 900 - 907
  • [32] Modeling for quantitative non-destructive evaluation
    Achenbach, JD
    ULTRASONICS, 2002, 40 (1-8) : 1 - 10
  • [33] Evaluation of Phases Proportions in Welded Joints of Duplex Stainless Steel by Non-Destructive Testing
    de Souza, Guttemberg Chagas
    Pardal, Juan Manuel
    Maior Tavares, Sergio Souto
    Cindra Fonseca, Maria da Penha
    Ferreira Martins, Jose Luiz
    de Moura, Elineudo Pinho
    Cardote Filho, Ismael
    SOLDAGEM & INSPECAO, 2013, 18 (02): : 158 - 168
  • [34] Non-destructive evaluation of rigid pavements using surface wave tests
    Gohil, Ramdev Rajesh
    Samu, Vivek
    Kumar, Jyant
    CONSTRUCTION AND BUILDING MATERIALS, 2024, 442
  • [35] COMPLEMENTARY ELECTROMAGNETIC NON-DESTRUCTIVE EVALUATION
    Tian, Gui Yun
    Wilson, John
    Morozov, Maxim
    REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLS 30A AND 30B, 2011, 1335 : 1256 - 1263
  • [36] NON-DESTRUCTIVE EVALUATION OF CATHODIC DISBONDMENT
    KELLNER, JD
    MATERIALS PERFORMANCE, 1983, 22 (07) : 25 - 27
  • [37] Deformation, fracture and non-destructive evaluation
    Kishi, Teruo
    Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 2009, 95 (07): : 458 - 465
  • [38] Engineering Doctorate in non-destructive evaluation
    不详
    INSIGHT, 2006, 48 (03) : 132 - 132
  • [39] HTc SQUID for non-destructive evaluation
    Pagano, S
    Sarnelli, E
    Camerlingo, C
    Monaco, A
    Russo, M
    Peluso, G
    Pepe, G
    Ruosi, A
    Valentino, M
    Teti, R
    Buonadonna, P
    Maritato, L
    Salvato, M
    Prencipe, M
    ELECTROMAGNETIC NONDESTRUCTIVE EVALUATION (II), 1998, 14 : 206 - 214
  • [40] Non-destructive evaluation of engineering ceramics
    Kishi, T
    Koo, JH
    SCIENCE OF ENGINEERING CERAMICS II, 1999, 2 : 587 - 592