Tribological properties of a-C/Cr(N) coatings in micro-and nano-scales

被引：22
|
作者：
Zhang, P. [1 ]
Wang, L. [1 ]
Nie, X. [1 ]
机构：
[1] Univ Windsor, Windsor, ON N9B 3P4, Canada
来源：
SURFACE & COATINGS TECHNOLOGY | 2007年 / 201卷 / 9-11期
基金：
加拿大自然科学与工程研究理事会;
关键词：
coatings; tribology; nanoindentation; nanowear; nanotribology;
D O I：
10.1016/j.surfcoat.2006.07.220
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
This research was involved with comparison study of tribological properties of a-C/Cr(N) multilayered coatings in micro-and nano-scales. The aC/Cr(N) coatings were deposited on Si wafers and M2 steel substrates by unbalanced magnetron sputtering of one Cr and two C targets. Cross-section TEM analysis was used to determine the layer periodicity of the coatings. Nanoindentation was used to measure hardness (H) and elastic modulus (E), and also perform nanowear tests. Pin-on-disc tribological tests were conducted to evaluate tribological properties of the coatings in micro-scales. HI E, H-3 / E-2, and h(f)/h(max) values were calculated for predication of wear performance of the coatings. It was found that the ranking of coating wear resistance was consistent to the order of H / E, H-3 / E-2, and h(f)/h(max) values. The coating with a periodicity of 4 nm had the highest hardness and the best wear resistance in both nano-and micro-scales. (C) 2006 Elsevier B.V. All rights reserved.
引用
收藏
页码：5176 / 5181
页数：6
相关论文
共 50 条
  • [31] Visco-elastic flows at macro-, micro- and nano-scales
    Biferale, Luca
    Manzi, Guido
    Sbragaglia, Mauro
    HOUILLE BLANCHE-REVUE INTERNATIONALE DE L EAU, 2009, (06): : 79 - 83
  • [32] Flexible metasurfaces and metamaterials: A review of materials and fabrication processes at micro- and nano-scales
    Walia, Sumeet
    Shah, Charan M.
    Gutruf, Philipp
    Nili, Hussein
    Chowdhury, Dibakar Roy
    Withayachumnankul, Withawat
    Bhaskaran, Madhu
    Sriram, Sharath
    APPLIED PHYSICS REVIEWS, 2015, 2 (01):
  • [33] Tribological and Corrosion Properties of Cr-Zr-N Coatings
    Kim, Gwang-Seok
    Kim, Young-Su
    Kim, Sung-Min
    Lee, Sang-Yul
    Lee, Kwang-Ryeol
    JOURNAL OF THE KOREAN PHYSICAL SOCIETY, 2009, 54 (04) : 1569 - 1573
  • [34] Impact behavior of advanced films under micro- and nano-scales: A review
    Cheng, Yujie
    Dong, Jinlei
    Xiao, Kailu
    Jiang, Minqiang
    Huang, Chenguang
    Wu, Xianqian
    THIN-WALLED STRUCTURES, 2024, 205
  • [35] Tribological Properties of a-C:H and ta-C Coatings on 7075 Aluminum Alloys
    Huang Z.
    Yang D.
    Yang B.
    Liu C.
    Liu, Chuansheng (csliuan@whu.edu.cn), 1600, Chinese Mechanical Engineering Society (33): : 47 - 54
  • [36] a-C(:H) and a-C(:H)_Zr coatings deposited on biomedical Ti-based substrates: Tribological properties
    Escudeiro, A.
    Polcar, T.
    Cavaleiro, A.
    THIN SOLID FILMS, 2013, 538 : 89 - 96
  • [37] Nanoindentation, AFM and tribological properties of thin nc-WC/a-C Coatings
    Lofaj, Frantisek
    Ferdinandy, Milan
    Cempura, Gregorz
    Dusza, Jan
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2012, 32 (09) : 2043 - 2051
  • [38] Tribological properties of TiC/a-C:H nanocomposite coatings prepared via HiPIMS
    Sanchez-Lopez, J. C.
    Dominguez-Meister, S.
    Rojas, T. C.
    Colasuonno, M.
    Bazzan, M.
    Patelli, A.
    APPLIED SURFACE SCIENCE, 2018, 440 : 458 - 466
  • [39] Dome issues of rough surface contact plasticity at micro- and nano-scales
    Gao, YF
    Bower, AF
    Kim, KS
    FUNDAMENTALS OF NANOINDENTATION AND NANOTRIBOLOGY III, 2005, 841 : 225 - 230
  • [40] Effect of Carbon Content on Tribological Properties of CrN:a-C Multiphase Composite Coatings
    Ma, Fei
    Wang, Chuang
    Guo, Wuming
    Shi, Xiangdong
    Sun, Jianying
    Pang, Gang
    Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research, 2024, 38 (04): : 297 - 307
12345