Forming limit curves in Single Point Incremental Forming

被引：77
|
作者：
Ham, M. [1 ]
Jeswiet, J. [1 ]
机构：
[1] Queens Univ, Kingston, ON, Canada
来源：
CIRP ANNALS-MANUFACTURING TECHNOLOGY | 2007年 / 56卷 / 01期
基金：
加拿大自然科学与工程研究理事会;
关键词：
forming; sheet metal; Incremental Forming;
D O I：
10.1016/j.cirp.2007.05.064
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
New experimental data is presented on Forming Limits in Single Point Incremental Forming (SPIF), which is a sheet metal forming process which does not require dies. A Box-Behnken Design of Experiment is used to develop the experimental plan and analyze data. In former work, the most critical factors affecting Single Point Incremental Forming were found to be material type, material thickness, formed shape, tool size, and incremental step size. In this experimental work, new results are presented as graphical response surfaces which show the forming limit for all the critical factors listed previously. In addition, forming limits are presented in terms of Forming Limit Diagrams.
引用
收藏
页码：277 / 280
页数：4
相关论文
共 50 条
  • [11] Incremental single point forming
    Jesvaet, J
    [J]. TRANSACTIONS OF THE NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTION OF SME, VOL XXIX, 2001, 2001, : 75 - 79
  • [12] New Methodologies for the Determination of Precise Forming Limit Curve in Single Point Incremental Forming Process
    Hussain, Ghulam
    Lin, Gao
    Hayat, Nasir
    Dar, Nameem Ullah
    Iqbal, Asif
    [J]. MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-5, 2010, 97-101 : 126 - +
  • [13] Forming Behavior of Paperboard in Single Point Incremental Forming
    Stein, Philipp
    Franke, Wilken
    von Elling, Magnus
    Groche, Peter
    [J]. BIORESOURCES, 2019, 14 (01) : 1731 - 1764
  • [14] Prediction of forming forces in single point incremental forming
    Bansal, Ankush
    Lingam, Rakesh
    Yadav, Sateesh Kumar
    Reddy, N. Venkata
    [J]. JOURNAL OF MANUFACTURING PROCESSES, 2017, 28 : 486 - 493
  • [15] The Analysis of Forming Forces in Single Point Incremental Forming
    Koh, Kyung Hee
    Kang, Jae-Gwan
    Jung, Jong-Yun
    [J]. 2016 5TH INTERNATIONAL CONFERENCE ON TRANSPORTATION AND TRAFFIC ENGINEERING (ICTTE 2016), 2016, 81
  • [16] Critical analysis of necking and fracture limit strains and forming forces in single-point incremental forming
    Centeno, Gabriel
    Bagudanch, Isabel
    Martinez-Donaire, A. J.
    Garcia-Romeu, M. L.
    Vallellano, C.
    [J]. MATERIALS & DESIGN, 2014, 63 : 20 - 29
  • [17] Failure in single point incremental forming
    Madeira, T.
    Silva, C. M. A.
    Silva, M. B.
    Martins, P. A. F.
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 80 (9-12): : 1471 - 1479
  • [18] Single point incremental forming of PVC
    Franzen, V.
    Kwiatkowski, L.
    Martins, P. A. F.
    Tekkaya, A. E.
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (01) : 462 - 469
  • [19] Single point incremental forming of polymers
    Martins, P. A. F.
    Kwiatkowski, L.
    Franzen, V.
    Tekkaya, A. E.
    Kleiner, M.
    [J]. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2009, 58 (01) : 229 - 232
  • [20] Forces in single point incremental forming
    Jeswiet, J
    Szekeres, A
    [J]. TRANSACTIONS OF THE NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTION OF SME 2005, VOL 33, 2005, 2005, 33 : 399 - 404
12345