New Methodologies for the Determination of Precise Forming Limit Curve in Single Point Incremental Forming Process

被引：2

作者：

Hussain, Ghulam ^{[1
]}

Lin, Gao ^{[1
]}

Hayat, Nasir ^{[1
]}

Dar, Nameem Ullah ^{[2
]}

Iqbal, Asif ^{[2
]}

机构：

[1] Nanjing Univ Aeronaut & Astronaut, Nanjing 210016, Peoples R China

[2] Univ Engn & Technol, Taxila, Pakistan

来源：

MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-5 | 2010年 / 97-101卷

关键词：

Incremental forming; Formability; FLC; Straight groove test; SHEET-METAL; FORMABILITY;

D O I：

10.4028/www.scientific.net/AMR.97-101.126

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Straight groove test is a widely-used formability test in Single Point Incremental Forming (SPIF). This test does not cover all the forming aspects of SPIF process, however. In order to ascertain its legitimacy, two new tests covering necessary SPIF aspects are devised. The FLC of an aluminum sheet is determined using the newly proposed and straight groove tests. It is found that the straight groove test shows much lower formability than the new tests. Therefore, the employment of newly devised test(s) is proposed for the determination of precise formability limits.

引用

页码：126 / +

页数：2

共 50 条

[1] Forming limit curves in Single Point Incremental Forming
Ham, M.
Jeswiet, J.
[J]. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2007, 56 (01) : 277 - 280
[2] Forming limit diagrams for single point incremental forming
Jeswiet, J
Young, D
[J]. TRANSACTIONS OF THE NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTION OF SME 2005, VOL 33, 2005, 2005, 33 : 391 - 397
[3] Prediction of single point incremental forming limit
Li, Lei
Zhou, Wanlin
Hussain, G.
[J]. Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2010, 46 (18): : 102 - 107
[4] Prediction and research of single point incremental forming limit
Li, Lei
Zhou, Wanlin
Hussain, G.
[J]. MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-5, 2010, 97-101 : 4005 - 4009
[5] Prediction of forming limit in single point incremental forming with the ductile fracture criterion
Huang, Y.
Wang, Y. J.
Cao, J.
Li, M.
[J]. PROCEEDINGS OF THE ASME INTERNATIONAL CONFERENCE ON MANUFACTURING SCIENCE AND ENGINEERING - 2007, 2007, : 929 - 934
[6] Forming limit diagrams for single-point incremental forming of aluminium sheet
Jeswiet, J
Young, D
[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2005, 219 (04) : 359 - 364
[7] Forming limit predictions for single-point incremental sheet metal forming
Van Bael, A.
Eyckens, P.
He, S.
Bouffioux, C.
Henrard, C.
Habraken, A. M.
Duflou, J.
Van Houtte, P.
[J]. 10TH ESAFORM CONFERENCE ON MATERIAL FORMING, PTS A AND B, 2007, 907 : 309 - 314
[8] Effects of forming parameters on the forming limit of single-point incremental forming of sheet metal
Chunjian Su
Shipeng Lv
Rui Wang
Yuting Lv
Shumei Lou
Qing Wang
Sumin Guo
[J]. The International Journal of Advanced Manufacturing Technology, 2021, 113 : 483 - 501
[9] Effects of forming parameters on the forming limit of single-point incremental forming of sheet metal
Su, Chunjian
Lv, Shipeng
Wang, Rui
Lv, Yuting
Lou, Shumei
Wang, Qing
Guo, Sumin
[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 113 (1-2): : 483 - 501
[10] The effect of process parameters on forming forces in single point incremental forming
Dwivedy, Maheshwar
Kalluri, Vinayak
[J]. 18TH INTERNATIONAL CONFERENCE ON SHEET METAL, SHEMET 2019 - NEW TRENDS AND DEVELOPMENTS IN SHEET METAL PROCESSING, 2019, 29 : 120 - 128

← 1 2 3 4 5 →