Forming limit curves in Single Point Incremental Forming

被引：77
|
作者：
Ham, M. [1 ]
Jeswiet, J. [1 ]
机构：
[1] Queens Univ, Kingston, ON, Canada
来源：
CIRP ANNALS-MANUFACTURING TECHNOLOGY | 2007年 / 56卷 / 01期
基金：
加拿大自然科学与工程研究理事会;
关键词：
forming; sheet metal; Incremental Forming;
D O I：
10.1016/j.cirp.2007.05.064
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
New experimental data is presented on Forming Limits in Single Point Incremental Forming (SPIF), which is a sheet metal forming process which does not require dies. A Box-Behnken Design of Experiment is used to develop the experimental plan and analyze data. In former work, the most critical factors affecting Single Point Incremental Forming were found to be material type, material thickness, formed shape, tool size, and incremental step size. In this experimental work, new results are presented as graphical response surfaces which show the forming limit for all the critical factors listed previously. In addition, forming limits are presented in terms of Forming Limit Diagrams.
引用
收藏
页码：277 / 280
页数：4
相关论文
共 50 条
  • [1] Forming limit diagrams for single point incremental forming
    Jeswiet, J
    Young, D
    TRANSACTIONS OF THE NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTION OF SME 2005, VOL 33, 2005, 2005, 33 : 391 - 397
  • [2] Prediction of single point incremental forming limit
    Li L.
    Zhou W.
    Hussain G.
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2010, 46 (18): : 102 - 107
  • [3] Prediction and research of single point incremental forming limit
    Li, Lei
    Zhou, Wanlin
    Hussain, G.
    MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-5, 2010, 97-101 : 4005 - 4009
  • [4] Forming limit diagrams for single-point incremental forming of aluminium sheet
    Jeswiet, J
    Young, D
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2005, 219 (04) : 359 - 364
  • [5] Prediction of forming limit in single point incremental forming with the ductile fracture criterion
    Huang, Y.
    Wang, Y. J.
    Cao, J.
    Li, M.
    PROCEEDINGS OF THE ASME INTERNATIONAL CONFERENCE ON MANUFACTURING SCIENCE AND ENGINEERING - 2007, 2007, : 929 - 934
  • [6] Forming limit predictions for single-point incremental sheet metal forming
    Van Bael, A.
    Eyckens, P.
    He, S.
    Bouffioux, C.
    Henrard, C.
    Habraken, A. M.
    Duflou, J.
    Van Houtte, P.
    10TH ESAFORM CONFERENCE ON MATERIAL FORMING, PTS A AND B, 2007, 907 : 309 - 314
  • [7] Effects of forming parameters on the forming limit of single-point incremental forming of sheet metal
    Chunjian Su
    Shipeng Lv
    Rui Wang
    Yuting Lv
    Shumei Lou
    Qing Wang
    Sumin Guo
    The International Journal of Advanced Manufacturing Technology, 2021, 113 : 483 - 501
  • [8] Effects of forming parameters on the forming limit of single-point incremental forming of sheet metal
    Su, Chunjian
    Lv, Shipeng
    Wang, Rui
    Lv, Yuting
    Lou, Shumei
    Wang, Qing
    Guo, Sumin
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 113 (1-2): : 483 - 501
  • [9] Forming limit predictions for the serrated strain paths in single point incremental sheet forming
    Eyckens, P.
    He, S.
    Van Bael, A.
    Van Houtte, P.
    Duflou, J.
    NUMIFORM '07: MATERIALS PROCESSING AND DESIGN: MODELING, SIMULATION AND APPLICATIONS, PTS I AND II, 2007, 908 : 141 - +
  • [10] Incremental single point forming
    Jeswiet, J.
    Ali, A.
    American Society of Mechanical Engineers, Manufacturing Engineering Division, MED, 2000, 11 : 509 - 513
12345