Processing and characterisation of modified strain-induced melt activation processed Al-Si alloys

被引：8
|
作者：
Choudhary, Chandan [1 ]
Sahoo, Kanai Lal [2 ]
Mandal, Durbadal [1 ]
机构：
[1] Natl Inst Technol Durgapur, Dept Met & Mat Engn, Mahatma Gandhi Ave, Durgapur 713209, WB, India
[2] CSIR, Natl Met Lab, Mat Engn Div, Jamshedpur, Bihar, India
来源：
MATERIALS SCIENCE AND TECHNOLOGY | 2020年 / 36卷 / 02期
关键词：
Al-Si alloys; casting defects; modified strain-induced melt activation process; fibrous eutectic silicon; microstructural features; mechanical properties; DSC analysis; fractography; AZ91D ALLOY; ALUMINUM; BEHAVIOR; MICROSTRUCTURE;
D O I：
10.1080/02670836.2019.1686564
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In the present study, the microstructural features and its correlation with mechanical properties of modified strain-induced melt activation (modified SIMA) processed Al- (7, 12, 14 wt-%) Si alloys are investigated. The microstructure of modified SIMA process Al-Si alloys consists of globular alpha-Al grains, primary Si particles and Al-Si eutectic phase. The casting defects and surface roughness are minimised and the morphology of eutectic silicon is modified after modified SIMA treatment. The mechanical properties of modified SIMA processed samples are increased significantly as compare to as-cast alloy due to reduction of porosity, formation of fine globular microstructu+re and accumulation of high dislocation tangle near primary Si particles.
引用
收藏
页码：181 / 193
页数：13
相关论文
共 50 条
  • [41] Effect of melt purification treatment on the solidified microstructure of hypereutectic Al-Si alloys
    Zhu, Z.
    Wang, J. H.
    Liu, Y.
    Wu, C. J.
    Tu, H.
    Su, X. P.
    [J]. MATERIALS TODAY COMMUNICATIONS, 2023, 35
  • [42] Microstructural characterisation of Al-Si cast alloys containing rare earth additions
    Elgallad, E. M.
    Ibrahim, M. F.
    Doty, H. W.
    Samuel, F. H.
    [J]. PHILOSOPHICAL MAGAZINE, 2018, 98 (15) : 1337 - 1359
  • [43] Characterisation of intermetallic phases in multicomponent Al-Si casting alloys for engineering applications
    Chen, C. L.
    West, G.
    Thomson, R. C.
    [J]. ALUMINIUM ALLOYS 2006, PTS 1 AND 2: RESEARCH THROUGH INNOVATION AND TECHNOLOGY, 2006, 519-521 : 359 - 364
  • [44] Microstructure evolution in an Al-Si piston alloy under ultrasonic melt processing
    Chankitmunkong, Suwaree
    Eskin, Dmitry G.
    Limmaneevichitr, Chaowalit
    [J]. JOINT 5TH INTERNATIONAL CONFERENCE ON ADVANCES IN SOLIDIFICATION PROCESSES (ICASP-5) & 5TH INTERNATIONAL SYMPOSIUM ON CUTTING EDGE OF COMPUTER SIMULATION OF SOLIDIFICATION, CASTING AND REFINING (CSSCR-5), 2019, 529
  • [45] Effect of friction stir processing on tribological properties of Al-Si alloys
    Aktarer, S. M.
    Sekban, D. M.
    Yanar, H.
    Purcek, G.
    [J]. 13TH INTERNATIONAL CONFERENCE ON TRIBOLOGY (ROTRIB'16), 2017, 174
  • [46] Property improvement in Al-Si alloys through rapid solidification processing
    Dasgupta, R
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1997, 72 (03) : 380 - 384
  • [47] Numerical characterization of microstructure modified by strontium in Al-Si cast alloys
    Lu, SZ
    Lee, B
    Hellwell, A
    [J]. ADVANCES IN ALUMINUM CASTING TECHNOLOGY, 1998, : 291 - 296
  • [48] Effect of composition and processing route on the wear behaviour of Al-Si alloys
    Lasa, L
    Rodriguez-Ibabe, JM
    [J]. SCRIPTA MATERIALIA, 2002, 46 (06) : 477 - 481
  • [49] Semi-solid alloys processing. Application to hypereutectic Al-Si alloys
    Valer, J
    Rodriguez, JM
    Urcola, JJ
    [J]. REVISTA DE METALURGIA, 1996, 32 (04) : 231 - 247
  • [50] Newton thermal analysis of unmodified and strontium modified Al-Si alloys
    Aparicio, R.
    Gonzalez-Rivera, C.
    Ramirez-Argaez, M.
    Barrera, G.
    Trapaga, G.
    [J]. KOVOVE MATERIALY-METALLIC MATERIALS, 2013, 51 (04): : 211 - 220
12345