Processing and characterisation of modified strain-induced melt activation processed Al-Si alloys

被引：8
|
作者：
Choudhary, Chandan [1 ]
Sahoo, Kanai Lal [2 ]
Mandal, Durbadal [1 ]
机构：
[1] Natl Inst Technol Durgapur, Dept Met & Mat Engn, Mahatma Gandhi Ave, Durgapur 713209, WB, India
[2] CSIR, Natl Met Lab, Mat Engn Div, Jamshedpur, Bihar, India
来源：
MATERIALS SCIENCE AND TECHNOLOGY | 2020年 / 36卷 / 02期
关键词：
Al-Si alloys; casting defects; modified strain-induced melt activation process; fibrous eutectic silicon; microstructural features; mechanical properties; DSC analysis; fractography; AZ91D ALLOY; ALUMINUM; BEHAVIOR; MICROSTRUCTURE;
D O I：
10.1080/02670836.2019.1686564
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In the present study, the microstructural features and its correlation with mechanical properties of modified strain-induced melt activation (modified SIMA) processed Al- (7, 12, 14 wt-%) Si alloys are investigated. The microstructure of modified SIMA process Al-Si alloys consists of globular alpha-Al grains, primary Si particles and Al-Si eutectic phase. The casting defects and surface roughness are minimised and the morphology of eutectic silicon is modified after modified SIMA treatment. The mechanical properties of modified SIMA processed samples are increased significantly as compare to as-cast alloy due to reduction of porosity, formation of fine globular microstructu+re and accumulation of high dislocation tangle near primary Si particles.
引用
收藏
页码：181 / 193
页数：13
相关论文
共 50 条
  • [21] Melt treatment of Al-Si foundry alloys with B and Sr additions
    Birol, Yucel
    JOURNAL OF MATERIALS SCIENCE, 2017, 52 (11) : 6856 - 6865
  • [22] Structure evolution of Al-Si alloys during melt thermal treatment
    Zhou, Zheng
    Zhu, Wei
    Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2010, 31 (04): : 29 - 33
  • [23] Effects of melt thermal treatment on cast Al-Si alloys: A review
    Manani, Sunil
    Pradhan, A. K.
    MATERIALS TODAY-PROCEEDINGS, 2022, 62 : 6568 - 6572
  • [24] Hypereutectic Al-Si binary alloys prepared by melt spinning method
    Zhao, ZK
    Li, JC
    Jiang, Q
    ADVANCED ENGINEERING MATERIALS, 2004, 6 (05) : 303 - 306
  • [25] Freezing Range, Melt Quality, and Hot Tearing in Al-Si Alloys
    Uludag, Muhammet
    Cetin, Remzi
    Dispinar, Derya
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2018, 49A (05): : 1948 - 1961
  • [26] FORMATION OF MICROSTRUCTURE IN AL-SI ALLOYS UNDER ULTRASONIC MELT TREATMENT
    Zhang, L.
    Eskin, D. G.
    Miroux, A.
    Katgerman, L.
    LIGHT METALS 2012, 2012, : 999 - 1004
  • [27] Freezing Range, Melt Quality, and Hot Tearing in Al-Si Alloys
    Muhammet Uludağ
    Remzi Çetin
    Derya Dispinar
    Metallurgical and Materials Transactions A, 2018, 49 : 1948 - 1961
  • [28] Anisotropy of Crystal-Melt Interfacial Energy for Al-Si and Al-Si-Sc Alloys
    Wang Tao
    Chen Xiaohua
    Wang Zidong
    RARE METAL MATERIALS AND ENGINEERING, 2017, 46 (06) : 1566 - 1571
  • [29] Solidification processing and microstructure analysis of synthetic Al-Si alloys
    MadelaineDupuich, O
    Stolarz, J
    Triboulet, G
    Kurzydlowski, KJ
    ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3, 1996, 217 : 219 - 224
  • [30] Effect of processing parameters on microstructure in brazing of Al-Si alloys
    Shutov, I. V.
    Kamaeva, L. V.
    Krivilyov, M. D.
    Yu, C-N.
    Mesarovic, S. Dj.
    Sekulic, D. P.
    JOURNAL OF CRYSTAL GROWTH, 2020, 530
12345