Microstructure, mechanical properties and age-hardening of Mg-Li alloy sheets

被引：0
|
作者：
Li Hong-bin [1 ]
Yao Guang-chun [1 ]
Guo Zhi-qiang [1 ]
Liu Yi-han [1 ]
Ji Hai-bin [1 ]
机构：
[1] Northeastern Univ, Sch Met & Mat, Shenyang 110004, Peoples R China
来源：
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2006年 / 16卷
关键词：
magnesium-lithium alloy; mechanical properties; aging-hardening;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Mg-(5-22)(mass fraction, %)Li alloys with Zn addition were produced and studied. The density of studied alloys is 1.191.62 g/cm(3). it is found that the alloy has excellent cold-workability and can be rolled to thin sheets at room temperature. The tensile tests were carried out at various tensile temperatures and strain rates. It is remarkable that the superplasticity occurs during uniaxial tensions at 150 degrees C. In addition, the sheet is very sensitive to strain-rate even at room temperature. The age-hardening of the sheets at room temperature and 50 degrees C was investigated. The hardening may be caused by the precipitation of MgLi2Zn phase, and overaging occurs owing to the phase transformation from MgLi2Zn to MgLiZn observed by X-ray diffractometry.
引用
收藏
页码：S1729 / S1731
页数：3
相关论文
共 50 条
  • [41] Workability and mechanical properties of lighter-than-water Mg-Li alloy
    Aida, T
    Hatta, H
    Ramesh, CS
    Kamado, S
    Kojima, Y
    PROCEEDINGS OF THE THIRD INTERNATIONAL MAGNESIUM CONFERENCE, 1997, : 143 - 152
  • [42] Relationship between mechanical properties and age-hardening behavior around grain boundaries of Al-Mg-Si alloy
    Hashimoto, Takuya
    Ikeda, Ken-ichi
    Miura, Seiji
    17TH INTERNATIONAL CONFERENCE ON ALUMINIUM ALLOYS 2020 (ICAA17), 2020, 326
  • [43] Microstructure and texture evolution of Mg-Li alloy during rolling
    Cui, Chongliang
    Zhu, Tianlong
    Zhang, Tianlong
    Wu, Ruizhi
    Betsofen, Sergey
    Zhang, Jinghuai
    Zhang, Milin
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2014, 105 (11) : 1111 - 1117
  • [44] CHARACTERISTICS OF THE MICROSTRUCTURE AND PROPERTIES OF Mg-Li MAGNESIUM ALLOY AFTER DEFORMATION BY THE KOBO METHOD
    Bednarczyk, I
    ARCHIVES OF METALLURGY AND MATERIALS, 2022, 67 (03) : 1179 - 1184
  • [45] Microstructure and mechanical properties of Mg-Li-Mn alloy
    Li, Hong-Bin
    Ji, Hai-Bin
    Yao, Guang-Chun
    Liu, Yi-Han
    Guo, Zhi-Qiang
    Liu, Zhen-Gang
    Guocheng Gongcheng Xuebao/The Chinese Journal of Process Engineering, 2006, 6 (03): : 491 - 494
  • [46] TEXTURE EVOLUTION AND MECHANICAL PROPERTIES OF Mg-Li ALLOY DURING THERMO-MECHANICAL PROCESS
    Zou, Y.
    Zhang, Y.
    Zhao, Y.
    Xu, S. S.
    Guo, H.
    Zhang, M. L.
    Zhang, Z. W.
    MAGNESIUM TECHNOLOGY 2016, 2016, : 263 - 266
  • [47] Effect of annealing on microstructure evolution and age-hardening behavior of dilute Mg–Al–Ca–Mn alloy
    Zuo, J.
    Nakata, T.
    Xu, C.
    Xia, Y.P.
    Shi, H.L.
    Wang, G.S.
    Tang, G.Z.
    Fan, G.H.
    Kamado, S.
    Geng, L.
    Journal of Materials Research and Technology, 2022, 18 : 1754 - 1762
  • [48] Age-hardening of surface aged hardening alloy
    李忠厚
    刘小萍
    赵金香
    徐 重
    TransactionsofNonferrousMetalsSocietyofChina, 2000, (06) : 788 - 790
  • [49] SUPERPLASTICITY OF MG-LI ALLOY
    KOJIMA, Y
    INOUE, M
    TANNO, O
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1990, 54 (03) : 354 - 355
  • [50] Age-hardening of surface aged hardening alloy
    Li, ZH
    Liu, XP
    Zhao, JX
    Xu, Z
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2000, 10 (06) : 788 - 790
12345