Microstructure, mechanical properties and age-hardening of Mg-Li alloy sheets

被引：0
|
作者：
Li Hong-bin [1 ]
Yao Guang-chun [1 ]
Guo Zhi-qiang [1 ]
Liu Yi-han [1 ]
Ji Hai-bin [1 ]
机构：
[1] Northeastern Univ, Sch Met & Mat, Shenyang 110004, Peoples R China
来源：
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2006年 / 16卷
关键词：
magnesium-lithium alloy; mechanical properties; aging-hardening;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Mg-(5-22)(mass fraction, %)Li alloys with Zn addition were produced and studied. The density of studied alloys is 1.191.62 g/cm(3). it is found that the alloy has excellent cold-workability and can be rolled to thin sheets at room temperature. The tensile tests were carried out at various tensile temperatures and strain rates. It is remarkable that the superplasticity occurs during uniaxial tensions at 150 degrees C. In addition, the sheet is very sensitive to strain-rate even at room temperature. The age-hardening of the sheets at room temperature and 50 degrees C was investigated. The hardening may be caused by the precipitation of MgLi2Zn phase, and overaging occurs owing to the phase transformation from MgLi2Zn to MgLiZn observed by X-ray diffractometry.
引用
收藏
页码：S1729 / S1731
页数：3
相关论文
共 50 条
  • [21] Microstructure, Mechanical Properties, and Age-Hardening Behavior of an Al-Si-Fe-Mn-Cu-Mg Alloy Produced by Spray Deposition
    Wang Feng
    Zhang Jishan
    Xiong Baiqing
    Zhang Yongan
    Journal of Materials Engineering and Performance, 2011, 20 : 155 - 159
  • [22] Microstructure and Mechanical Behaviors of The New LAZ1151 Mg-Li Alloy
    Cheng, Chai-Wei
    Huang, Jian-Jia
    Lee, Shyong
    Wang, Jian-Yih
    Chiang, Chih-Te
    ADVANCED MATERIALS, PTS 1-4, 2011, 239-242 : 1326 - +
  • [23] Effect of Mischmetal on Microstructure and Mechanical Properties of supertight Mg-Li Alloys
    Li Yangmin
    Peng Xiaodong
    Hu Faping
    Wei Guobing
    Xie Weidong
    Liu Junwei
    Yang Yan
    Li Mengluan
    Wang Xuemei
    RARE METAL MATERIALS AND ENGINEERING, 2017, 46 (07) : 1775 - 1781
  • [24] Microstructure, Mechanical Properties, and Age-Hardening Behavior of an Al-Si-Fe-Mn-Cu-Mg Alloy Produced by Spray Deposition
    Wang Feng
    Zhang Jishan
    Xiong Baiqing
    Zhang Yongan
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2011, 20 (01) : 155 - 159
  • [25] Effect of Mischmetal on Microstructure and Mechanical Properties of Superlight Mg-Li Alloys
    Peng, Xiaodong (pxd@cqu.edu.cn), 1775, Science Press (46):
  • [26] Microstructure and Mechanical Properties of Mg-Li Powder by Hot Rolling Process
    Choi, Jeong-Won
    Kim, Yong-Ho
    Kim, Jung-Han
    Yoo, Hyo-Sang
    Woo, Kee-Do
    Kim, Ki-Beom
    Son, Hyeon-Taek
    KOREAN JOURNAL OF MATERIALS RESEARCH, 2015, 25 (01): : 32 - 36
  • [27] Microstructure and mechanical properties of friction stir welded duplex Mg-Li alloy LZ91
    Zhou, Mengran
    Morisada, Yoshiaki
    Fujii, Hidetoshi
    Wang, Jian-Yih
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 773 (773):
  • [28] Microstructure and mechanical properties of refill friction stir spot welded Al–Mg-Li alloy joints
    H. W. Tang
    W. Y. Li
    X. S. Feng
    F. Cui
    Y. F. Zou
    Welding in the World, 2023, 67 : 385 - 393
  • [29] Microstructure and Mechanical Properties of a Two-Phase Mg-Li Alloy Processed By Constrained Groove Pressing
    Wang, Zongshen
    Zhang, Bin
    Zhou, Wei
    Zhu, Lihua
    Zheng, Hongyu
    Guan, Yanjin
    Zhai, Wengang
    ADVANCED ENGINEERING MATERIALS, 2021, 23 (01)
  • [30] Texture evolution and their effects on the mechanical properties of duplex Mg-Li alloy
    Zou, Yun
    Zhang, Lehao
    Wang, Hongtao
    Tong, Xin
    Zhang, Milin
    Zhang, Zhongwu
    JOURNAL OF ALLOYS AND COMPOUNDS, 2016, 669 : 72 - 78
12345