Analysis of the influence of rotor design on the stream flow conditions within an internal mixer

被引：0

作者：

Limper, A ^{[1
]}

Wilhelmsmeyer, T ^{[1
]}

机构：

[1] Univ Paderborn, Inst Kunststofftech, KTP, D-33098 Paderborn, Germany

来源：

MACROMOLECULAR MATERIALS AND ENGINEERING | 2002年 / 287卷 / 11期

关键词：

mixing behaviour; rotor design; stream flow;

D O I：

10.1002/mame.200290004

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A flow visualisation apparatus is described which allows to compare different rotor design to each other. In order to observe the distributive mixing effect, the stream flow and dispersive mixing effect is monitored by an indirect measurement of the power impact within the material. Assuming that the mixing process of an internal mixer is not continuous, a testing device was build to the scale of a 90 l kneader. In this device the mixing chamber and the rotor blade are unwound into the flat plane. With this testing device it is possible to carry out a systematic analysis of the influence of rotor design on the flow processes within an internal mixer in a fast and inexpensive way.

引用

页码：750 / 757

页数：8

共 50 条

[41] Complex Basal Conditions and Their Influence on Ice Flow at the Onset of the Northeast Greenland Ice Stream
Franke, Steven
Jansen, Daniela
Beyer, Sebastian
Neckel, Niklas
Binder, Tobias
Paden, John
Eisen, Olaf
JOURNAL OF GEOPHYSICAL RESEARCH-EARTH SURFACE, 2021, 126 (03)
[42] EFFECTS OF TIP CLEARANCE AND OPERATING CONDITIONS ON THE FLOW STRUCTURE AND TURBULENCE WITHIN AN AXIAL COMPRESSOR ROTOR PASSAGE
Li, Yuanchao
Chen, Huang
Tan, David
Katz, Joseph
PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2016, VOL 2A, 2016,
[43] Internal flow of flow-ejecting centrifugal pump under off-design conditions
National Research Center of Pump, Jiangsu University, Zhenjiang
212013, China
不详
355001, China
Nongye Jixie Xuebao, 8 (48-53):
[44] THE INFLUENCE OF CLEARANCE VARIATION BETWEEN THE ROTORS OF AN INTERNAL MIXER ON THE MIXING PROCESS - AN ANALYSIS PERFORMED ON THE LABORATORY INTERNAL MIXER VIC-1.9 USING A NATURAL-RUBBER COMPOUND
MICHAELI, W
MEIERTOBERENS, U
KAUTSCHUK GUMMI KUNSTSTOFFE, 1994, 47 (05): : 359 - 363
[45] Study of Flow Patterns in Radial and Back Swept Turbine Rotor under Design and Off-Design Conditions
Shah, S. P.
Channiwala, S. A.
Kulshreshtha, D. B.
Chaudhari, G.
JOURNAL OF APPLIED FLUID MECHANICS, 2016, 9 (04) : 1791 - 1798
[46] Investigation of propeller mixer for agitation of non-Newtonian fluid flow to predict the characteristics within the design process
Reviol, T.
Kluck, S.
Etringer, G.
Wang, P.
Boehle, M.
CHEMICAL ENGINEERING SCIENCE, 2018, 191 : 420 - 435
[47] FLOW-ANALYSIS IN AN INTERNAL MIXER .2. ESTIMATION OF MIXING EFFICIENCY BY BATCH HOMOGENIZATION TIME
KAWANISHI, K
YAGII, K
INTERNATIONAL POLYMER PROCESSING, 1990, 5 (03) : 173 - 177
[48] CFD Analysis of a Kenics Static Mixer with a Low Pressure Drop under Laminar Flow Conditions
Nyande, Baggie W.
Thomas, Kiran Mathew
Lakerveld, Richard
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2021, 60 (14) : 5264 - 5277
[49] Influence of the groove design of wet clutch discs on the flow within the clearance
Neupert, Thomas
Bartel, Dirk
KUPPLUNGEN UND KUPPLUNGSSYSTEME IN ANTRIEBEN 2017/ SCHWINGUNGSREDUZIERUNG IN MOBILEN SYSTEMEN 2017, 2017, 2309 : 135 - 145
[50] Redesign of steam turbine rotor blades and rotor packages - Environmental analysis within systematic eco-design approach
Baran, Jolanta
ENERGY CONVERSION AND MANAGEMENT, 2016, 116 : 18 - 31

← 1 2 3 4 5 →