Analysis of Multi Chips Turn on Consistency in High Voltage and High Current IGBT Module

被引:0
|
作者
Yao, Erxian [1 ]
Wang, Rui [1 ]
Liu, Xuguang [1 ]
Pan, Zhengwei [1 ]
Tong, Yan [1 ]
机构
[1] Nari Geiri Semicond Co Ltd, Nanjing, Peoples R China
关键词
switching consistency; high power IGBT module; parasitic parameters;
D O I
10.1109/ICCS51219.2020.9336600
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
In this paper, the influence of module internal structure, gap between and substrate, chip layout on multi chips turn on consistency are analyzed, taking the 3300V-1500A IGBT module as example. the copper foil area of the drive PCB should be expanded as much as possible, and the gate copper foil and the emitter copper foil should overlap as much as possible to offset the influence of the power side current change on the drive signal. On the chip layout, the difference between the gate path and the emitter path length should be minimized to improve the consistency of the driving signals of different chips. The gap between the drive PCB and the backing plate should be increased as much as possible to reduce the impact of the power side current change on the drive side.
引用
收藏
页码:105 / 109
页数:5
相关论文
共 50 条
  • [21] Selection of Aging Characteristic Parameter for Multi-Chips Parallel IGBT Module
    Ding X.
    Chen M.
    Lai W.
    Luo D.
    Wei Y.
    Diangong Jishu Xuebao/Transactions of China Electrotechnical Society, 2022, 37 (13): : 3304 - 3316
  • [22] Analysis and comparison of a fast turn-on series IGBT stack and high-voltage-rated, commercial IGBTS
    Castagno, Scott
    Curry, Randy D.
    Loree, Ellis
    IEEE TRANSACTIONS ON PLASMA SCIENCE, 2006, 34 (05) : 1692 - 1696
  • [23] Turn-off behaviour of high voltage NPT- and FS-IGBT
    Eckel, Hans-Guenter
    Fleisch, Karl
    2008 13TH INTERNATIONAL POWER ELECTRONICS AND MOTION CONTROL CONFERENCE, VOLS 1-5, 2008, : 48 - +
  • [24] High Power Density IGBT Module for High Reliability Applications
    Chamund, D. J.
    Coulbeck, L.
    Newcombe, D. R.
    Waind, P. R.
    2009 IEEE 6TH INTERNATIONAL POWER ELECTRONICS AND MOTION CONTROL CONFERENCE, VOLS 1-4, 2009, : 683 - 689
  • [25] Thermal Resistance Analysis and Simulation of IGBT Module with High Power Density
    Wu, Yi-Bo
    Liu, Guo-You
    Xu, Ning-Hua
    Dou, Ze-Chun
    SENSORS, MEASUREMENT AND INTELLIGENT MATERIALS, PTS 1-4, 2013, 303-306 : 1902 - 1907
  • [26] Analysis of Characteristics of High Voltage IGBT under Low Temperature
    Wang, Cailin
    Tian, Qianhui
    Yang, Wuhua
    Cao, Rongrong
    2019 IEEE INTERNATIONAL CONFERENCE ON ELECTRON DEVICES AND SOLID-STATE CIRCUITS (EDSSC), 2019,
  • [27] HIGH-VOLTAGE, HIGH-CURRENT GATE TURN-OFF THYRISTOR
    OHASHI, H
    AZUMA, M
    UTAGAWA, T
    TOSHIBA REVIEW, 1977, (112): : 23 - 27
  • [28] Design of IGBT Module Packaging for High Reliability
    Nishimura, Yoshitaka
    Oonishi, Kazunaga
    Momose, Fumihiko
    Goto, Tomoaki
    INTERNATIONAL EXHIBITION AND CONFERENCE FOR POWER ELECTRONICS, INTELLIGENT MOTION AND POWER QUALITY 2010 (PCIM EUROPE 2010), VOLS 1 AND 2, 2010, : 236 - 241
  • [29] LOW Inductance High Power IGBT Module
    Zhao, Lei
    Jia, Yunpeng
    Zhou, Xintian
    Wang, Zhengjiang
    2022 19TH CHINA INTERNATIONAL FORUM ON SOLID STATE LIGHTING & 2022 8TH INTERNATIONAL FORUM ON WIDE BANDGAP SEMICONDUCTORS, SSLCHINA: IFWS, 2022, : 116 - 120
  • [30] Junction temperature extraction of high power IGBT module based on turn-off delay time
    Sun, Pengfei
    Luo, Haoze
    Dong, Yufei
    Li, Wuhua
    He, Xiangning
    Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 2015, 35 (13): : 3366 - 3372