Biconical Antenna with Integrated Balun Fabricated in Additive Manufacturing Technology

被引：1

作者：

Gaetano, Domenico ^{[1
]}

Canestri, Christian ^{[1
]}

Calcaterra, Alessandro ^{[1
]}

Bia, Pietro ^{[1
]}

Mitrano, Cosmo ^{[1
]}

机构：

[1] Elettronica SpA, ELT, Design Solut, Rome, Italy

来源：

2020 IEEE INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION AND NORTH AMERICAN RADIO SCIENCE MEETING | 2020年

关键词：

antennas; ultra wideband antennas; omnidirectional antennas; receiving antennas;

D O I：

10.1109/IEEECONF35879.2020.9330017

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

This paper describes the design and manufacturing of a biconical antenna with integrated balun for ultra-wideband (UWB) applications. The antenna is composed by a Duncan-Minerva balun that feeds a vertically polarized biconical radiating element. The fabrication of the item has been fully realized in Additive Manufacturing (AM) technology to simplify the assembly and reduce the weight. The applied technique has been the Direct Metal Laser Sintering (DMLS). The radiating element works from 200 MHz to 800 MHz ensuring good reflection coefficient and desired omnidirectional patterns. Simulation and measurement results show very close correspondence validating the design.

引用

页码：1617 / 1618

页数：2

共 50 条

[21] Additive manufacturing technology
Fujikawa, Takao
Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, 2014, 61 (05):
[22] Fast design of a printed dipole antenna with an integrated balun
Jaisson, D.
IEE PROCEEDINGS-MICROWAVES ANTENNAS AND PROPAGATION, 2006, 153 (04) : 389 - 394
[23] WIde-band antenna element with integrated balun
Smolders, AB
Arts, MJ
IEEE ANTENNAS AND PROPAGATION SOCIETY INTERNATIONAL SYMPOSIUM - ANTENNAS: GATEWAYS TO THE GLOBAL NETWORK, VOLS 1-4, 1998, : 1394 - 1397
[24] Dual wideband printed dipole antenna with integrated balun
Lindberg, P.
Ojefors, E.
Barna, Z.
Thornell-Pers, A.
Rydberg, A.
IET MICROWAVES ANTENNAS & PROPAGATION, 2007, 1 (03) : 707 - 711
[25] Design Guidelines and Performance Analysis of a Wideband Coaxial Horn Antenna Fabricated via Additive Manufacturing
Simionato, Eligia
Aldaya, Ivan
De Oliveira, Jose A.
Jardini, Andre L.
Avila, Julian
Da Rosa, Guilherme S.
Penchel, Rafael A.
IEEE OPEN JOURNAL OF ANTENNAS AND PROPAGATION, 2024, 5 (04): : 1121 - 1132
[26] Cartilage Tissue Engineering with Silk Fibroin Scaffolds Fabricated by Indirect Additive Manufacturing Technology
Chen, Chih-Hao
Liu, Jolene Mei-Jun
Chua, Chee-Kai
Chou, Siaw-Meng
Shyu, Victor Bong-Hang
Chen, Jyh-Ping
MATERIALS, 2014, 7 (03) : 2104 - 2119
[27] Mechanical properties of porous titanium alloy scaffold fabricated using additive manufacturing technology
Xia, Yu
Feng, Chendong
Xiong, Yinze
Luo, Yun
Li, Xiang
INTERNATIONAL JOURNAL OF APPLIED ELECTROMAGNETICS AND MECHANICS, 2019, 59 (03) : 1087 - 1095
[28] Complex shape transparent Al2O3 fabricated by integrated Spark Plasma Sintering- Additive manufacturing technology
Torresani, Elisa
Park, Cheolwoo
Grippi, Thomas
Haines, Chris
Olevsky, Eugene A.
CERAMICS INTERNATIONAL, 2024, 50 (19) : 37332 - 37340
[29] Miniaturized Balanced Antenna with Integrated Balun for Practical LTE Applications
Elfergani, Issa
Rodriguez, Jonathan
Abdussalam, Fathi
See, Chan H.
Abd-Alhameed, Read
RADIOENGINEERING, 2017, 26 (02) : 444 - 452
[30] A Wideband Printed Quadruple-Element Antenna With Integrated Balun
Zheng, Ru-Ping
Shi, Zhan
Guo, Chen-Jiang
Ding, Jun
IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS, 2013, 12 : 959 - 963

← 1 2 3 4 5 →