Biconical Antenna with Integrated Balun Fabricated in Additive Manufacturing Technology

被引：1
|
作者：
Gaetano, Domenico [1 ]
Canestri, Christian [1 ]
Calcaterra, Alessandro [1 ]
Bia, Pietro [1 ]
Mitrano, Cosmo [1 ]
机构：
[1] Elettronica SpA, ELT, Design Solut, Rome, Italy
来源：
2020 IEEE INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION AND NORTH AMERICAN RADIO SCIENCE MEETING | 2020年
关键词：
antennas; ultra wideband antennas; omnidirectional antennas; receiving antennas;
D O I：
10.1109/IEEECONF35879.2020.9330017
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
This paper describes the design and manufacturing of a biconical antenna with integrated balun for ultra-wideband (UWB) applications. The antenna is composed by a Duncan-Minerva balun that feeds a vertically polarized biconical radiating element. The fabrication of the item has been fully realized in Additive Manufacturing (AM) technology to simplify the assembly and reduce the weight. The applied technique has been the Direct Metal Laser Sintering (DMLS). The radiating element works from 200 MHz to 800 MHz ensuring good reflection coefficient and desired omnidirectional patterns. Simulation and measurement results show very close correspondence validating the design.
引用
收藏
页码：1617 / 1618
页数：2
相关论文
共 50 条
  • [1] Self-Sustained Biconical Antenna Realized in Additive Manufacturing Technology
    Calcaterra, Alessandro
    Gaetano, Domenico
    Canestri, Christian
    Bia, Pietro
    Mitrano, Cosmo
    2020 14TH EUROPEAN CONFERENCE ON ANTENNAS AND PROPAGATION (EUCAP 2020), 2020,
  • [2] UWB Horn Antenna Array Fabricated in Additive Manufacturing Technology
    Canestri, Christian
    Scattone, Francesco
    Bia, Pietro
    Russo, Ivan
    Gaetano, Domenico
    Manna, Antonio
    2019 13TH EUROPEAN CONFERENCE ON ANTENNAS AND PROPAGATION (EUCAP), 2019,
  • [3] Characteristics of antenna fabricated using additive manufacturing technology and the potential applications
    Aziz, Muthanna
    El Hassan, Amged
    Hussein, Mousa
    Zaneldin, Essam
    Al-Marzouqi, Ali H.
    Ahmed, Waleed
    HELIYON, 2024, 10 (06)
  • [4] Ultra-Wideband Balun for Biconical Antenna Structures
    Ott, A. T.
    Eberspaecher, M. A.
    Eibert, T. F.
    2010 IEEE ANTENNAS AND PROPAGATION SOCIETY INTERNATIONAL SYMPOSIUM, 2010,
  • [5] Complex Valued Neural Network Modelling of the Balun of a Biconical Antenna
    Bonci, Alessio
    Carobbi, Carlo
    Luchetta, Antonio
    2014 IEEE INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY (EMC), 2014, : 501 - 506
  • [6] Investigation of Broadband Printed Biconical Antenna with Tapered Balun for EMC Measurements
    Abdulhameed, Abdulghafor A.
    Kubik, Zdenek
    ENERGIES, 2021, 14 (13)
  • [7] Optimization of Corrugated Horn Antenna Fabricated by Additive Manufacturing and Plating
    Watanabe, Yuta
    Kuwahara, Satoshi
    Kobayashi, Ryuichi
    Takizawa, Kohei
    Takemura, Shota
    Fujiwara, Kohei
    TWENTIETH BIENNIAL IEEE CONFERENCE ON ELECTROMAGNETIC FIELD COMPUTATION (IEEE CEFC 2022), 2022,
  • [8] Information integrated glass module fabricated by integrated additive and subtractive manufacturing
    Zhang, Qi
    Lei, Jincheng
    Chen, Yizheng
    Tang, Jianan
    Wu, Yongji
    Hua, Liwei
    Xiao, Hai
    OPTICS LETTERS, 2020, 45 (07) : 1663 - 1666
  • [9] Strength and reliability of zirconia fabricated by additive manufacturing technology
    Zenthoefer, Andreas
    Schwindling, Franz Sebastian
    Schmitt, Clemens
    Ilani, Ali
    Zehender, Nathalie
    Rammelsberg, Peter
    Rues, Stefan
    DENTAL MATERIALS, 2022, 38 (10) : 1565 - 1574
  • [10] A compact wideband antenna with an integrated balun
    Fattouche, A.
    Mouffok, L.
    Hebib, S.
    Bitchikh, M.
    2020 XXXIIIRD GENERAL ASSEMBLY AND SCIENTIFIC SYMPOSIUM OF THE INTERNATIONAL UNION OF RADIO SCIENCE, 2020,
12345