Thermal conductivity of Al-SiCp composites by plasma spraying

被引：37
|
作者：
Gui, MC
Kang, SB
Euh, K
机构：
[1] Korea Inst Machinery & Mat, Dept Mat Technol, Chang Won 641010, Kyungnam, South Korea
[2] Inst Aeronaut Mat, Natl Lab Adv Composites, Beijing 100095, Peoples R China
来源：
SCRIPTA MATERIALIA | 2005年 / 52卷 / 01期
关键词：
thermal conductivity; aluminum matrix composites; plasma spraying; porosity; thermal boundary resistance; SiC;
D O I：
10.1016/j.scriptamat.2004.08.028
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Pure Al powders with 5 5 and 75 vol% SiC particles were ball milled in different conditions, and then plasma sprayed to form Al/ SiCp composites. The average size of SiC particles was varied from 8 to 30 mum. Thermal conductivity of the sprayed composites was measured at room temperature of 25degreesC. The tests showed that thermal conductivity of the composites was relatively low and significant variation with SiC size and feedstock preparation. The mechanism of thermal conductivity degradation in the composites was discussed, and numerical analyses were conducted based on theories of Maxwell and thermal boundary resistance. (C) 2004 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：51 / 56
页数：6
相关论文
共 50 条
  • [41] A Novel Approach for Extracting and Characterizing Interfacial Reaction Products in Al-SiCp Composites
    K.R. Ravi
    R.M. Pillai
    B.C. Pai
    M. Chakraborty
    Metallurgical and Materials Transactions A, 2007, 38 : 1666 - 1670
  • [42] Effect of Si on the microstructure and thermal conductivity of pressureless infiltrated SiCp/Al composites
    Ma, Qiang
    He, Xinbo
    Ren, Shubin
    Qu, Xuanhui
    Beijing Keji Daxue Xuebao/Journal of University of Science and Technology Beijing, 2008, 30 (01): : 45 - 48
  • [43] Erosion of A356 Al-SiCp composites due to multiple particle impact
    Dept of Mechanical Eng, Indian Inst Science, Bangalore 560012, India
    Wear, 2 (154-164):
  • [44] Roll Casting of Al-SiCp Strip
    Haga, Toshio
    PROCEEDINGS OF THE 19TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2016), 2016, 1769
  • [45] Erosion of A356 Al-SiCp composites due to multiple particle impact
    Saravanan, RA
    Surappa, MK
    Bai, BNP
    WEAR, 1997, 202 (02) : 154 - 164
  • [46] The influence of Ni and Zr additions on the hot compression properties of Al-SiCp composites
    Lattanzi, Lucia
    Etienne, Andrea
    Li, Ziyu
    Manjunath, Tushar
    Nixon, Nirmal
    Jarfors, Anders Eric Wollmar
    Awe, Samuel Ayowole
    Journal of Alloys and Compounds, 2022, 905
  • [47] SOME EFFECTS OF PARTICLE-SIZE ON THE FLOW BEHAVIOR OF AL-SICP COMPOSITES
    HU, MS
    SCRIPTA METALLURGICA ET MATERIALIA, 1991, 25 (03): : 695 - 700
  • [48] Roll casting of Al-SiCp strip
    Haga, T.
    Nakamura, T.
    Kumai, S.
    Watari, H.
    ADVANCED MATERIAL SCIENCE AND TECHNOLOGY, PTS 1 AND 2, 2011, 675-677 : 811 - +
  • [49] Roll Casting of Al-SiCp Strip
    Haga, Toshio
    Nakamura, Teppei
    Kumi, Sinji
    Watari, Hisaki
    PRICM 7, PTS 1-3, 2010, 654-656 : 978 - +
  • [50] Effect of rolling on the thermo-physical properties of SiCp/Al composites fabricated by plasma spraying
    Euh, K
    Kang, SB
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 395 (1-2): : 47 - 52
12345