Oxidation behavior of C-SiC composites with a Si-W coating from room temperature to 1500°C

被引:17
|
作者
Cheng, LF [1 ]
Xu, YD [1 ]
Zhang, LT [1 ]
Gao, R [1 ]
机构
[1] Northwestern Polytech Univ, State Key Lab Solidificat Proc, Xian 710072, Peoples R China
关键词
carbon-carbon composites; coating; oxidation;
D O I
10.1016/S0008-6223(00)00066-X
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Oxidation tests of carbon fiber reinforced silicon carbide composites with a Si-W coating were conducted in dry air from room temperature to 1500 degreesC for 5 h. A continuous series of empirical functions relating weight change to temperature after 5 h oxidation was found to fit the test results quite well over the whole temperature range. This approach was used to interpret the different oxidation mechanisms. There were two cracking temperatures of the matrix and the coating for the C-SIC composite. Oxidation behavior of the C-SIC composite was nearly the same as that of the coated C-C composite above the coatings cracking temperature, but weight loss of the C-SiC composite was half an order lower than that of the coated C-C composite below the cracking temperature. As an inhibitor, the SiC matrix increased the oxidation resistance of C-SiC composites by decreasing active sites available for oxidation. As an interfacial layer, pyrolytic carbon decreased the activation energy below 700 degreesC. From 800 degreesC to 1030 degreesC, uniform oxidation took place for the C-SiC composite, but non-uniform oxidation took place for the coated C-C composite in the same temperature range. The Knudsen diffusion coefficient could be used to explain the relationship between weight loss and temperature below the coating cracking temperature and the matrix cracking temperature. (C) 2000 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码:2133 / 2138
页数:6
相关论文
共 50 条
  • [1] Effect of carbon interlayer on oxidation behavior of C/SiC composites with a coating from room temperature to 1500°C
    Cheng, LF
    Xu, YD
    Zhang, LT
    Yin, XW
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2001, 300 (1-2): : 219 - 225
  • [2] Oxidation behavior of oxidation protective coatings for C/C-SiC composites at 1500 ℃
    闫志巧
    熊翔
    肖鹏
    陈峰
    张红波
    黄伯云
    Transactions of Nonferrous Metals Society of China, 2009, 19 (01) : 61 - 64
  • [3] Oxidation behavior of oxidation protective coatings for C/C-SiC composites at 1500°C
    Yan Zhi-qiao
    Xiong Xiang
    Xiao Peng
    Chen Feng
    Zhang Hong-bo
    Huang Bai-yun
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2009, 19 (01) : 61 - 64
  • [4] Multilayer oxidation protective coating for C/C composites from room temperature to 1500 °C
    Fu Qian-Cang
    Li He-Jun
    Wang Yong-Jie
    Li Ke-Zhi
    Tao Jun
    SURFACE & COATINGS TECHNOLOGY, 2010, 204 (11): : 1831 - 1835
  • [5] Oxidation behavior from room temperature to 1500°C of 3D-C/SiC composites with different coatings
    Cheng, Laifei
    Xu, Yongdong
    Zhang, Litong
    Yin, Xiaowei
    1600, American Ceramic Society (85):
  • [6] Oxidation behavior from room temperature to 1500°C of 3D-C/SiC composites with different coatings
    Cheng, LF
    Xu, YD
    Zhang, LT
    Yin, XW
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2002, 85 (04) : 989 - 991
  • [7] Influence of SiC nanowires on the properties of SiC coating for C/C composites between room temperature and 1500 °C
    Chu, Yanhui
    Fu, Qiangang
    Li, Hejun
    Li, Kezhi
    Zou, Xu
    Gu, Caige
    CORROSION SCIENCE, 2011, 53 (09) : 3048 - 3053
  • [8] Oxidation behavior of C/C-SiC gradient matrix composites
    Deng, Jingyi
    Liu, Wenchuan
    Du, Haifeng
    Cheng, Huiming
    Li, Yiyi
    Journal of Materials Science and Technology, 2001, 17 (05): : 543 - 546
  • [9] Oxidation Behavior of C/C-SiC Gradient Matrix Composites
    Jingyi DENG
    JournalofMaterialsScience&Technology, 2001, (05) : 543 - 546
  • [10] Oxidation behavior of C/C-SiC gradient matrix composites
    Deng, JY
    Liu, WC
    Du, HF
    Cheng, HM
    Li, YY
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2001, 17 (05) : 543 - 546