Static recrystallisation kinetics of austenite in Ti, Nb and V microalloyed steels during hot deformation

被引：4
|
作者：
Chatterjee, S. [1 ]
Verma, A. K. [1 ]
Mukhopadhyay, A. [1 ]
机构：
[1] Res & Dev Tata Steel Ltd, Jamshedpur 831001, Jharkhand, India
来源：
IRONMAKING & STEELMAKING | 2007年 / 34卷 / 02期
关键词：
recrystallisation; microalloyed steels; double hit compression tests; interhit time; activation energy; n-value;
D O I：
10.1179/174328107X155231
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Static recrystallisation kinetics during hot deformation of two microalloyed steels (C-Ti-V and C-Ti-Nb) has been quantified. Double hit compression test using a Gleeble 1500 thermomechanical simulator was conducted to determine the recrystallisation kinetics. The kinetics of static recrystallisation was found to be more sluggish in the case of microalloyed steels with niobium additions as compared with other grades of microalloyed steels. The rate of recrystallisation increases with increasing temperature, strain and strain rate. The results are compared with other grades of microalloyed steels, mainly with Ti, Ni and Cu additions, from literature. For niobium containing microalloyed steels, a higher temperature is required for recrystallisation as compared with other microalloyed steels.
引用
收藏
页码：145 / 150
页数：6
相关论文
共 50 条
  • [31] An integrated computer model with applications for austenite-to-ferrite transformation during hot deformation of Nb-microalloyed steels
    Janusz Majta
    Maciej Pietrzyk
    Anna K. Zurek
    Mark Cola
    Pat Hochanadel
    [J]. Metallurgical and Materials Transactions A, 2002, 33 : 1509 - 1520
  • [32] An integrated computer model with applications for austenite-to-ferrite transformation during hot deformation of Nb-microalloyed steels
    Majta, J
    Zurek, AK
    Cola, M
    Hochanadel, P
    Pietrzyk, M
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2002, 33 (05): : 1509 - 1520
  • [33] Evolution of textures in hot rolled Nb-Ti and V-Nb microalloyed steels
    Misra, RDK
    Anderson, JP
    [J]. MATERIALS SCIENCE AND TECHNOLOGY, 2002, 18 (12) : 1513 - 1516
  • [34] Calculation of phase equilibria between austenite and (Nb, Ti, V)(C, N) in microalloyed steels
    Inoue, K
    Ishikawa, N
    Ohnuma, I
    Ohtani, H
    Ishida, K
    [J]. ISIJ INTERNATIONAL, 2001, 41 (02) : 175 - 182
  • [35] Softening behavior after hot deformation of Ti, Nb, V microalloyed steel
    Asensio, J
    Verdeja, JI
    Pero-Sanz, JA
    [J]. ROLL OF CHARACTERIZATION IN UNDERSTANDING ENVIRONMENTAL DEGRADATION OF MATERIALS, 1998, 25 : 429 - 435
  • [36] Effect of coarse γ grain size on the dynamic and static recrystallization during hot working in microalloyed Nb and Nb-Ti steels
    Univ of Navarra, San Sebastian, Spain
    [J]. Mater Sci Forum, (135-142):
  • [37] Recrystallization-precipitation interaction during austenite hot deformation of a Nb microalloyed steel
    Vervynckt, S.
    Verbeken, K.
    Thibaux, P.
    Houbaert, Y.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (16-17): : 5519 - 5528
  • [38] Metadynamic recrystallization of Nb–V microalloyed steel during hot deformation
    Wen-fei Shen
    Chi Zhang
    Li-wen Zhang
    Ying-nan Xia
    Yi-feng Xu
    Xin-hua Shi
    [J]. Journal of Materials Research, 2017, 32 : 656 - 665
  • [39] Effect of Mo, Nb and V on Hot Deformation Behaviour, Microstructure and Hardness of Microalloyed Steels
    Singh, Navjeet
    Kostryzhev, Andrii G.
    Killmore, Chris R.
    Pereloma, Elena V.
    [J]. THERMEC 2018: 10TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS, 2018, 941 : 3 - 8
  • [40] A model to predict the austenite evolution during hot strip rolling of conventional and Nb microalloyed steels
    ArcelorMittal Maizières
    不详
    [J]. Rev Metall, 2008, 9 (443-451+III+IV):
12345