Static recrystallisation kinetics of austenite in Ti, Nb and V microalloyed steels during hot deformation

被引:4
|
作者
Chatterjee, S. [1 ]
Verma, A. K. [1 ]
Mukhopadhyay, A. [1 ]
机构
[1] Res & Dev Tata Steel Ltd, Jamshedpur 831001, Jharkhand, India
关键词
recrystallisation; microalloyed steels; double hit compression tests; interhit time; activation energy; n-value;
D O I
10.1179/174328107X155231
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
Static recrystallisation kinetics during hot deformation of two microalloyed steels (C-Ti-V and C-Ti-Nb) has been quantified. Double hit compression test using a Gleeble 1500 thermomechanical simulator was conducted to determine the recrystallisation kinetics. The kinetics of static recrystallisation was found to be more sluggish in the case of microalloyed steels with niobium additions as compared with other grades of microalloyed steels. The rate of recrystallisation increases with increasing temperature, strain and strain rate. The results are compared with other grades of microalloyed steels, mainly with Ti, Ni and Cu additions, from literature. For niobium containing microalloyed steels, a higher temperature is required for recrystallisation as compared with other microalloyed steels.
引用
收藏
页码:145 / 150
页数:6
相关论文
共 50 条
  • [21] STATIC RECRYSTALLIZATION OF HOT DEFORMED AUSTENITE AND INDUCED PRECIPITATION KINETICS IN VANADIUM MICROALLOYED STEELS
    MEDINA, SF
    MANCILLA, JE
    HERNANDEZ, CA
    [J]. ISIJ INTERNATIONAL, 1994, 34 (08) : 689 - 696
  • [22] Effect of strain on recrystallisation during hot deformation of Nb-containing microalloyed steel
    Kundu, Amrita
    Davis, Claire
    Strangwood, Martin
    [J]. RECRYSTALLIZATION AND GRAIN GROWTH IV, 2012, 715-716 : 690 - 695
  • [23] Modelling the Kinetics of Austenite Decomposition in Nb-Ti-V Microalloyed Steel after Hot Strip Rolling
    dos Santos, A. A.
    Barbosa, R.
    [J]. STEEL RESEARCH INTERNATIONAL, 2009, 80 (09) : 632 - 638
  • [24] Equilibrium Modeling of (Nb, Ti, V)(C, N) Precipitation in Austenite of Microalloyed Steels
    Xu, Yaowen
    Tang, Di
    Song, Yong
    [J]. STEEL RESEARCH INTERNATIONAL, 2013, 84 (06) : 560 - 564
  • [25] Influence of the Ti/N ratio on the strength in the hot deformation and on the static recrystallisation in structural steels
    Vega, MI
    Medina, SF
    Quispe, A
    Gómez, M
    [J]. BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO, 2004, 43 (02): : 159 - 162
  • [26] Influence of strain rate on recrystallisation-precipitation interaction in V, Nb, and V-Ti microalloyed steels
    Medina, SF
    Quispe, A
    [J]. MATERIALS SCIENCE AND TECHNOLOGY, 2000, 16 (06) : 635 - 642
  • [27] Effect of deformation paramenters and reheating temperature on the non-recrystallisation temperature in Nb and Nb-Ti microalloyed steels
    Lera, RA
    Calvo, AIF
    Soria, BL
    [J]. REVISTA DE METALURGIA, 2001, 37 (01) : 10 - 17
  • [28] Effect of deformation paramenters and reheating temperature on the non-recrystallisation temperature in Nb and Nb-Ti microalloyed steels
    Abad Lera, Raquel
    Fernández Calvo, Ana Isabel
    López Soria, Beatriz
    [J]. Revista de Metalurgia (Madrid), 2001, 37 (01): : 10 - 17
  • [29] Effects of aluminium and nitrogen on static recrystallisation in V-microalloyed steels
    Gomez, M.
    Rancel, L.
    Medina, S. F.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 506 (1-2): : 165 - 173
  • [30] Austenite Grain Growth Kinetics after Isothermal Deformation in Microalloyed Steels with Varying Nb Concentrations
    Annan, Kofi Ahomkah
    Siyasiya, Charles Witness
    Stumpf, Waldo Edmund
    [J]. ISIJ INTERNATIONAL, 2018, 58 (02) : 333 - 339