Interfacial Reaction and Bump Shear Property of Electroplated Sn-37Pb Solder Bump with Ni Under Bump Metallization during Multiple Reflows

被引：1

作者：

Koo, Ja-Myeong ^{[1
]}

Jung, Seung-Boo ^{[1
]}

机构：

[1] Sungkyunkwan Univ, Sch Adv Mat Sci & Engn, Suwon 440746, South Korea

来源：

THERMEC 2006 SUPPLEMENT: 5TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS | 2007年 / 15-17卷

关键词：

Sn-Pb (tin-lead) solder; intermetallic compound (IMC); multiple reflows; ball shear test; flip chip; electroplating; Ni under bump metallization (Ni UBM);

D O I：

10.4028/www.scientific.net/AMR.15-17.181

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

The interfacial reactions and bump shear properties of the electroplated Sn-37Pb (in wt.%) solder bumps with the Ni under bump metallization (UBM) were investigated as a function of the number of reflows. A continuous facetted Ni3Sn4 intermetallic compound (IMC) layer was formed at the interface between the solder bump and the Ni UBM during reflow. The thickness of the Ni3Sn4 IMC layer was 0.41 mu m after 1 reflow, and then the thickness of the IMC layer increased with increasing the number of reflows. The shear properties of the bumps indicated the maximum values after 1 reflow, and then decreased with increasing the number of reflows. The fracture surfaces of the bumps showed ductile failure characteristics after 1 reflow, and then the fraction of the brittle fracture, induced by the IMC formed at the interface, increased with increasing the number of reflows.

引用

页码：181 / 186

页数：6

共 50 条

[31] Interfacial stability of eutectic SnPb solder and composite 60Pb40Sn solder on Cu/Ni(V)/Ti under-bump metallization
Wu A.T.
Hua F.
Journal of Materials Research, 2007, 22 (3) : 735 - 741
[32] Under bump metallization development for eutectic Pb-Sn solders
Hong, SJ
Korhonen, TM
Korhonen, MA
Li, CY
ELECTRONIC PACKAGING MATERIALS SCIENCE X, 1998, 515 : 73 - 77
[33] Reaction between Sn-In solder and under bump metallurgy
Choi, JH
Jung, BY
Jun, SW
Kim, YH
Oh, TS
DESIGNING, PROCESSING AND PROPERTIES OF ADVANCED ENGINEERING MATERIALS, PTS 1 AND 2, 2004, 449-4 : 401 - 404
[34] Development of electroplated Ni-xZn films for under bump metallization application
Lin, Hsiu-Min
Duh, Jenq-Gong
SURFACE & COATINGS TECHNOLOGY, 2013, 237 : 445 - 449
[35] Intermetallic compound formation and diffusion path evolution in the flip chip Sn-37Pb solder bump after aging
Hsiao, Li-Yin
Duh, Jenq-Gong
PROCEEDINGS OF THE SEVENTH IEEE CPMT CONFERENCE ON HIGH DENSITY MICROSYSTEM DESIGN, PACKAGING AND FAILURE ANALYSIS (HDP'05), 2005, : 173 - 180
[36] Electrical characteristics for Sn-Ag-Cu solder bump with Ti/Ni/Cu under-bump metallization after temperature cycling tests
T. I. Shih
Y. C. Lin
J. G. Duh
Tom Hsu
Journal of Electronic Materials, 2006, 35 : 1773 - 1780
[37] Electrical characteristics for Sn-Ag-Cu solder bump with Ti/Ni/Cu under-bump metallization after temperature cycling tests
Shih, T. I.
Lin, Y. C.
Duh, J. G.
Hsu, Tom
JOURNAL OF ELECTRONIC MATERIALS, 2006, 35 (10) : 1773 - 1780
[38] Wettability of electroplated Ni-P in under bump metallurgy with Sn-Ag-Cu solder
Lin, YC
Duh, JG
Chiou, BS
JOURNAL OF ELECTRONIC MATERIALS, 2006, 35 (01) : 7 - 14
[39] Influence of solder cap thickness on the interfacial reaction in Cu/Sn/Ni copper pillar bump
Li, Ya
Rao, Li
Ling, Huiqin
Hu, Anmin
Li, Ming
2017 18TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2017, : 639 - 643
[40] Wettability of electroplated Ni-P in under bump metallurgy with Sn-Ag-Cu solder
Yung-Chi Lin
Jenq-Gong Duh
Bi-Shiou Chiou
Journal of Electronic Materials, 2006, 35 : 7 - 14

← 1 2 3 4 5 →