A ZnO nanorod based 64° YX LiNbO3 surface acoustic wave CO sensor

被引：0
|
作者：
Sadek, A. Z. [1 ]
Wlodarski, W. [1 ]
Kalantar-Zadeh, K. [1 ]
Li, Y. [2 ]
Yu, W. [2 ]
Li, X. [2 ]
Yu, X. [2 ]
机构：
[1] RMIT Univ, Sch Elect & Comp Engn, Sensor Technol Lab, Melbourne, Vic, Australia
[2] Chinese Acad Sci, Shanghai Inst Ceram, Shanghai, Peoples R China
来源：
2006 IEEE SENSORS, VOLS 1-3 | 2006年
关键词：
D O I：
暂无
中图分类号：
O42 [声学];
学科分类号：
070206 ; 082403 ;
摘要：
Zinc oxide (ZnO) nanorod based surface acoustic wave (SAW) gas sensor has been developed. ZnO nanorods were deposited onto a layered ZnO/64 degrees YX LiNbO3 substrate using a liquid solution method. Micro-characterization results reveal that the diameter and area density of ZnO nanorods are around 100 nm and 107 cm(-2), respectively. The sensor was exposed to different concentrations of CO in synthetic air. The sensor response at operating temperatures between 200 degrees C and 300 degrees C was examined. The study showed that the sensor responded with highest frequency shift at 265 degrees C. At this temperature, stable base-line and fast response and recovery were observed. The developed sensor is promising for industrial applications.
引用
收藏
页码：706 / +
页数：2
相关论文
共 50 条
  • [21] Diamond/ZnO/LiNbO3 structure for packageless acoustic wave sensors
    Floer, Cecile
    Moutaouekkil, Mohammed
    Bartoli, Florian
    Mishra, Harshad
    Mc Murtry, Stefan
    Hage-Ali, Sami
    Elmazria, Omar
    Talbi, Abdelkrim
    Matar, Olivier Bou
    Dekkar, Damia
    Baudrillart, Benoit
    Benedic, Fabien
    Zhgoon, Sergei
    Bartoli, Florian
    Aubert, Thierry
    2017 IEEE SENSORS, 2017, : 1551 - 1553
  • [22] Investigation of layered SAW sensors based on a WO3/ZNO/64° YX LiNbO3 structure with gold catalytic layer
    Sivan, VP
    Ippolito, SJ
    Kandasamy, S
    Kalantar-Zadeh, K
    Wlodarski, W
    Holland, A
    Micro- and Nanotechnology: Materials, Processes, Packaging, and Systems II, 2005, 5650 : 276 - 284
  • [23] Novel Surface Acoustic Wave Temperature-Strain Sensor Based on LiNbO3 for Structural Health Monitoring
    Li, Xiangrong
    Tan, Qiulin
    Qin, Li
    Yan, Xiawen
    Liang, Xiaorui
    MICROMACHINES, 2022, 13 (06)
  • [24] Simulation of characteristics of a LiNbO3/diamond surface acoustic wave
    Shikata, S
    Hachigo, A
    Nakahata, H
    Narita, M
    IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 2004, 51 (10) : 1308 - 1313
  • [25] Nonreciprocal propagation of surface acoustic wave in Ni/LiNbO3
    Sasaki, R.
    Nii, Y.
    Iguchi, Y.
    Onose, Y.
    PHYSICAL REVIEW B, 2017, 95 (02)
  • [26] Calculation of intrinsic surface acoustic wave velocity in LiNbO3
    Liu, Tao
    Yu, Kuanxin
    Wang, Peng
    5TH INTERNATIONAL SYMPOSIUM ON ADVANCED OPTICAL MANUFACTURING AND TESTING TECHNOLOGIES: OPTOELECTRONIC MATERIALS AND DEVICES FOR DETECTOR, IMAGER, DISPLAY, AND ENERGY CONVERSION TECHNOLOGY, 2010, 7658
  • [27] FEM simulation of a YX128°-LiNbO3 SAW sensor
    Xue, Qi-Qi
    Sun, Chong-Bo
    Sun, Yi
    Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology, 2010, 42 (03): : 364 - 367
  • [28] Flexible dual-mode surface acoustic wave strain sensor based on crystalline LiNbO3 thin film
    Xu, Hongsheng
    Cao, Zhen
    Dong, Shurong
    Chen, Jinkai
    Xuan, Weipeng
    Cheng, Weiwei
    Huang, Shuyi
    Shi, Lin
    Liu, Shuting
    Farooq, Umar
    Qadir, Akeel
    Luo, Jikui
    JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2019, 29 (02)
  • [29] The development of a wireless Love wave biosensor on 41° YX LiNbO3
    Oh, Hae-Kwan
    Wang, Wen
    Lee, Keekeun
    Min, Churlki
    Yang, Sangsik
    SMART MATERIALS AND STRUCTURES, 2009, 18 (02)
  • [30] FEM Modeling and Simulation of a Layered SAW device Based on ZnO/128° YX LiNbO3
    Salim, Zaid. T.
    Hashim, U.
    Arshad, M. K. Md.
    2016 IEEE INTERNATIONAL CONFERENCE ON SEMICONDUCTOR ELECTRONICS (ICSE) PROCEEDINGS, 2016, : 5 - 8
12345