Microstructure and mechanical properties of pure Ti processed by high-ratio differential speed rolling at room temperature

被引：109
|
作者：
Kim, W. J. [1 ]
Yoo, S. J. [1 ]
Lee, J. B. [2 ]
机构：
[1] Hongik Univ, Dept Mat Sci & Engn, Seoul 121791, South Korea
[2] Tohoku Univ, Dept Mat Sci & Engn, Aoba Ku, Sendai, Miyagi 9808579, Japan
来源：
SCRIPTA MATERIALIA | 2010年 / 62卷 / 07期
关键词：
Cold working; Severe plastic deformation (SPD); Titanium; Grain refining; Texture; SEVERE PLASTIC-DEFORMATION; TITANIUM; SHEETS;
D O I：
10.1016/j.scriptamat.2009.12.008
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
High-strength Ti sheets could be fabricated by effective grain-refinement through high-ratio differential speed rolling for a thickness reduction of 63% in a single rolling pass at room temperature. Formation of narrowly spaced shear bands distributed uniformly over the entire thickness section of the sheet and a high temperature rise by intensive shear banding during rolling resulted in the formation of ultrafine grains with the size of 0.1-0.3 mu m. The rolled Ti sheet exhibited an ultimate tensile strength of 895-915 MPa. (C) 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：451 / 454
页数：4
相关论文
共 50 条
  • [1] Multi-layer graphene/copper composites: Preparation using high-ratio differential speed rolling, microstructure and mechanical properties
    Kim, W. J.
    Lee, T. J.
    Han, S. H.
    CARBON, 2014, 69 : 55 - 65
  • [2] Microstructure and Mechanical Properties of a Copper Alloy Sheet Processed by a Differential Speed Rolling
    Lee, Seong-Hee
    KOREAN JOURNAL OF MATERIALS RESEARCH, 2012, 22 (11): : 581 - 586
  • [3] Microstructure, mechanical properties and anysotropy of pure Ti processed by twist extrusion and cold rolling
    Orlov, DV
    Stolyarov, VV
    Salimgareyev, HS
    Soshnikova, EP
    ULTRAFINE GRAINED MATERIALS III, 2004, : 457 - 462
  • [4] Stress corrosion cracking of high-strength AZ31 processed by high-ratio differential speed rolling
    Shi, Zhiming
    Kim, W. J.
    Cao, Fuyong
    Dargusch, Matthew S.
    Atrens, Andrej
    JOURNAL OF MAGNESIUM AND ALLOYS, 2015, 3 (04) : 271 - 282
  • [5] Exceptionally high strength in Mg-3Al-1Zn alloy processed by high-ratio differential speed rolling
    Kim, W. J.
    Lee, Y. G.
    Lee, M. J.
    Wang, J. Y.
    Park, Y. B.
    SCRIPTA MATERIALIA, 2011, 65 (12) : 1105 - 1108
  • [6] Microstructure and mechanical properties of AM31 magnesium alloys processed by differential speed rolling
    Chang, L. L.
    Cho, J. H.
    Kang, S. B.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2011, 211 (09) : 1527 - 1533
  • [7] Microstructure evolution and mechanical properties of severely deformed Al alloy processed by differential speed rolling
    Loorentz
    Ko, Young Gun
    JOURNAL OF ALLOYS AND COMPOUNDS, 2012, 536 : S122 - S125
  • [8] Shape memory and superelasticity of nanograined Ti-51.2 at.% Ni alloy processed by severe plastic deformation via high-ratio differential speed rolling
    Lim, Y. G.
    Han, S. H.
    Choi, E.
    Kim, W. J.
    MATERIALS CHARACTERIZATION, 2018, 145 : 284 - 293
  • [9] Superplastic behavior of a fine-grained ZK60 magnesium alloy processed by high-ratio differential speed rolling
    Kim, W. J.
    Kim, M. J.
    Wang, J. Y.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 527 (1-2): : 322 - 327
  • [10] Characteristics and interrelation of recovery stress and recovery strain of an ultrafine-grained Ni-50.2Ti alloy processed by high-ratio differential speed rolling
    Lim, Y. G.
    Kim, W. J.
    SMART MATERIALS AND STRUCTURES, 2017, 26 (03)
12345