Microstructure and mechanical properties of pure Ti processed by high-ratio differential speed rolling at room temperature

被引：109
|
作者：
Kim, W. J. [1 ]
Yoo, S. J. [1 ]
Lee, J. B. [2 ]
机构：
[1] Hongik Univ, Dept Mat Sci & Engn, Seoul 121791, South Korea
[2] Tohoku Univ, Dept Mat Sci & Engn, Aoba Ku, Sendai, Miyagi 9808579, Japan
来源：
SCRIPTA MATERIALIA | 2010年 / 62卷 / 07期
关键词：
Cold working; Severe plastic deformation (SPD); Titanium; Grain refining; Texture; SEVERE PLASTIC-DEFORMATION; TITANIUM; SHEETS;
D O I：
10.1016/j.scriptamat.2009.12.008
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
High-strength Ti sheets could be fabricated by effective grain-refinement through high-ratio differential speed rolling for a thickness reduction of 63% in a single rolling pass at room temperature. Formation of narrowly spaced shear bands distributed uniformly over the entire thickness section of the sheet and a high temperature rise by intensive shear banding during rolling resulted in the formation of ultrafine grains with the size of 0.1-0.3 mu m. The rolled Ti sheet exhibited an ultimate tensile strength of 895-915 MPa. (C) 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：451 / 454
页数：4
相关论文
共 50 条
  • [21] Strain, Microstructure and Mechanical Properties Through Thickness of Oxygen Free Copper Sheet Processed by Differential Speed Rolling
    Lee, Seong-Hee
    Yoon, Dae-Jin
    Sakai, Tetsuo
    Kim, Su-Hyun
    Han, Seung-Zeon
    JOURNAL OF THE KOREAN INSTITUTE OF METALS AND MATERIALS, 2009, 47 (02): : 121 - 128
  • [22] Microstructure and Mechanical Properties of a Cu-Fe-P Copper Alloy Sheet Processed by Differential Speed Rolling
    Lee, Seong-Hee
    Lim, Jung-Youn
    Utsunomiya, Hiroshi
    Euh, Kwangjun
    Han, Seung-Zeon
    KOREAN JOURNAL OF METALS AND MATERIALS, 2010, 48 (10): : 942 - 950
  • [23] Effect of the speed ratio on grain refinement and texture development in pure Ti during differential speed rolling
    Kim, W. J.
    Yoo, S. J.
    Jeong, H. T.
    Kim, D. M.
    Choe, B. H.
    Lee, J. B.
    SCRIPTA MATERIALIA, 2011, 64 (01) : 49 - 52
  • [24] A combination of ball milling and high-ratio differential speed rolling for synthesizing carbon nanotube/copper composites
    Yoo, S. J.
    Han, S. H.
    Kim, W. J.
    CARBON, 2013, 61 : 487 - 500
  • [25] Microstructure, texture and mechanical properties of pure copper processed by ECAP and subsequent cold rolling
    Bahadori, Sh. Ranjbar
    Dehghani, K.
    Bakhshandeh, F.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 583 : 36 - 42
  • [26] Texture and mechanical properties of ultrafine-grained Mg-3Al-1Zn alloy sheets prepared by high-ratio differential speed rolling
    Kim, W. J.
    Lee, H. W.
    Yoo, S. J.
    Park, Y. B.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (03): : 874 - 879
  • [27] Microstructure and Mechanical Properties of Twist Extruded Pure Aluminum Processed by Post-Rolling
    Bahadori, Sh Ranjbar
    Mousavi, S. A. A. Akbari
    Shahab, A. R.
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES II, PTS 1 AND 2, 2011, 264-265 : 183 - 187
  • [28] Effects of differential speed ratio on the microstructure and texture of AZ31 magnesium alloy sheets processed by differential speed rolling
    Li, Zhen
    Cai, Qing-Wu
    Jiang, Hai-Tao
    Meng, Qiang
    Beijing Keji Daxue Xuebao/Journal of University of Science and Technology Beijing, 2010, 32 (08): : 1017 - 1022
  • [29] Microstructure and superplasticity of the as-cast Mg-9Al-1Zn magnesium alloy after high-ratio differential speed rolling
    Kim, Y. S.
    Kim, W. J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 677 : 332 - 339
  • [30] Evolution of Texture and Mechanical Properties of Pure Mg Processed by ECAP at Room Temperature
    Lei, Weiwei
    Liang, Wei
    Wang, Hongxia
    Guo, Hongwei
    JOM, 2017, 69 (11) : 2297 - 2301
12345