Investigation on fracture toughness of polytetrafluoroethylene with impact essential work of fracture method

被引：2
|
作者：
Armagan, Mustafa [1 ,2 ]
Arici, A. Armagan [2 ]
机构：
[1] Istanbul Medeniyet Univ, Directorate Construct Tech Works, D-100 Hiwy 8, TR-34720 Istanbul, Turkey
[2] Kocaeli Univ, Dept Mech Engn, TR-41001 Izmit, Turkey
来源：
POLYMERS & POLYMER COMPOSITES | 2021年 / 29卷 / 9_SUPPL期
关键词：
Impact essential work of fracture; fracture toughness; polymer; polytetrafluoroethylene; filled-PTFE; Charpy test; scanning electron microscope; GLASS-FIBER; COMPOSITES;
D O I：
10.1177/09673911211003392
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Polytetrafluoroethylene (PTFE) polymer has a wide range of applications in various industries. Therefore, for designers it is essential to know the strength properties of the material under dynamic loads. In this study, pure-PTFE, bronze and carbon filled-PTFE are tested under dynamic load. In addition, pure and carbon filled specimens were used to determine the temperature effect of PTFE. All tests were carried out in the Charpy impact device according to impact essential work of fracture method. At 23 degrees C, pure-PTFE showed the highest impact strengths, bronze filled-PTFE and carbon filled-PTFE showed lower respectively and it has been found that the carbon filler increases the fracture toughness approximately two times at high temperature (I 50 degrees C). On fracture surfaces phase transitions effects of PTFE and behavior of fillers used were investigated with Scanning Electron Microscope.
引用
收藏
页码：S335 / S343
页数：9
相关论文
共 50 条
  • [41] On the fracture toughness of intermetallics estimated from the work of fracture
    Varin, RA
    SCRIPTA MATERIALIA, 2001, 45 (12) : 1357 - 1363
  • [42] ON THE ESSENTIAL WORK OF FRACTURE
    JOE, CR
    KIM, BH
    INTERNATIONAL JOURNAL OF FRACTURE, 1990, 42 (01) : R3 - R8
  • [43] Determination of Plane-Strain Fracture Toughness of Polyethylene Copolymer Based on the Concept of Essential Work of Fracture
    Ben Jar, P-Y.
    Adianto, Riski
    POLYMER ENGINEERING AND SCIENCE, 2010, 50 (03): : 530 - 535
  • [44] Determination of fracture toughness of poly(ethylene terephthalate) film by essential work of fracture and J integral measurements
    Arkhireyeva, A
    Hashemi, S
    PLASTICS RUBBER AND COMPOSITES, 2001, 30 (07) : 337 - 350
  • [45] Fracture toughness characterization of aluminum allay AA3003 using essential work of fracture concept
    Mebarki, H.
    Benguediab, M.
    Fekirini, H.
    Bouchouicha, B.
    Lebon, F.
    MATERIALS PHYSICS AND MECHANICS, 2023, 51 (03): : 105 - 114
  • [46] A Comparative Study to Evaluate the Essential Work of Fracture to Measure the Fracture Toughness of Quasi-Brittle Material
    Abdellah, Mohammed Y.
    Zuwawi, Abdul-Rahman
    Azam, Sufyan A.
    Hassan, Mohamed K.
    MATERIALS, 2022, 15 (13)
  • [47] On the essential work of fracture
    Joe, C.R., 1600, (42):
  • [48] Fracture toughness assessment of poly(ethylene terephthalate) blends with glycidyl methacrylate modified polyolefin elastomer using essential work of fracture method
    Mouzakis, DE
    Papke, N
    Wu, JS
    Karger-Kocsis, J
    JOURNAL OF APPLIED POLYMER SCIENCE, 2001, 79 (05) : 842 - 852
  • [49] On the essential work of fracture method: Energy partitioning of the fracture process in iPP films
    Ferrer-Balas, D
    Maspoch, ML
    Martinez, AB
    Santana, OO
    POLYMER BULLETIN, 1999, 42 (01) : 101 - 108
  • [50] Optimization of the essential work of fracture method for characterization of the fracture resistance of metallic sheets
    Hilhorst, A.
    Pardoen, T.
    Jacques, P. J.
    ENGINEERING FRACTURE MECHANICS, 2022, 268
12345