Parameters optimization on the lapping process for advanced ceramics by applying Taguchi method

被引：2
|
作者：
Yuan, Julong [1 ]
Lv, Binghai [1 ,2 ]
Zhou, Zhaozhong [1 ]
Tao, Baochun [1 ]
机构：
[1] Zhejiang Univ Technol, Ultraprecis Machining Res Ctr, Hangzhou 310014, Peoples R China
[2] Harbin Inst Technol, Dept Engn Mech, Harbin 15001, Peoples R China
来源：
ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY II | 2006年 / 532-533卷
关键词：
optimum design; Taguchi method; advanced ceramics; lapping;
D O I：
10.4028/www.scientific.net/MSF.532-533.488
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The surface quality is a critical factor affecting the performance and reliability of advanced ceramics. This paper focuses on the application of Taguchi method for optimization of advanced ceramics lapping process parameters to obtain the best finish. An optimization experiment for lapping silicon wafer with Al2O3 was designed by Taguchi method. Surface roughness Ra and Rt are considered as criteria for optimization. Influence of parameters involving load, speed, and slurry concentration for a given workmaterial with given abrasive (material and size) are discussed, and the optimum lapping conditions are figured out. Compared with single parameter experimental results, it illustrates that the experiment design based on Taguchi method can successfully applied to determine the optimum processing conditions for advanced ceramics lapping process.
引用
收藏
页码：488 / +
页数：2
相关论文
共 50 条
  • [41] A TAGUCHI APPROACH FOR OPTIMIZATION OF PROCESS PARAMETERS IN WATERJET CLEANING PROCESS
    Khajavi, A.
    Kolahan, F.
    Esmaeelzadeh, A.
    IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF MECHANICAL ENGINEERING, 2014, 38 (M1) : 97 - 104
  • [42] Optimization of process parameters to improve mechanical properties of fused deposition method using taguchi method
    Giri J.
    Sunheriya N.
    Sathish T.
    Kadu Y.
    Chadge R.
    Giri P.
    Parthiban A.
    Mahatme C.
    Interactions, 2024, 245 (01)
  • [43] Optimization of Bending Process Parameters for Seamless Tubes Using Taguchi Method and Finite Element Method
    Lin, Jui-Chang
    Lee, Kingsun
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2015, 2015
  • [44] SLS PARAMETERS OPTIMIZATION USING THE TAGUCHI METHOD
    Berce, Petru
    Pacurar, Razvan
    Balc, Nicolae
    Paclisan, Dana
    ANNALS OF DAAAM FOR 2008 & PROCEEDINGS OF THE 19TH INTERNATIONAL DAAAM SYMPOSIUM: INTELLIGENT MANUFACTURING & AUTOMATION: FOCUS ON NEXT GENERATION OF INTELLIGENT SYSTEMS AND SOLUTIONS, 2008, : 93 - 94
  • [45] Optimization of Process Parameters for Friction Stir Welding of Aluminum and Copper Using the Taguchi Method
    Eslami, Nima
    Hischer, Yannik
    Harms, Alexander
    Lauterbach, Dennis
    Boehm, Stefan
    METALS, 2019, 9 (01)
  • [46] Optimization of vacuum brazing process parameters in AA6061 using Taguchi method
    Lin, Huei
    Hwang, Jiun-Ren
    Fung, Chin-Ping
    JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 2016, 10 (02):
  • [47] Optimization of brazing process parameters in butt joint of brass 319 using Taguchi method
    Stalin, B.
    Ravichandran, M.
    Vadivel, K.
    Vairamuthu, J.
    MATERIALS TODAY-PROCEEDINGS, 2020, 21 : 237 - 243
  • [48] Statistical Modelling and Optimization of TIG Welding Process Parameters Using Taguchi's Method
    Omprakasam, S.
    Marimuthu, K.
    Raghu, R.
    Velmurugan, T.
    STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2022, 68 (03): : 200 - 209
  • [49] Optimization of the Process Parameters for Hydrotreating Used Cooking Oil by the Taguchi Method and Fuzzy Logic
    Kumar, Naveen
    Sonthalia, Ankit
    Koul, Rashi
    JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, 2020, 142 (12):
  • [50] Process parameters optimization of Nd:YAG pulsed laser welding based on Taguchi method
    Liu H.
    Xiang B.
    Xu Z.
    Song X.
    Wang X.
    Zhongguo Jiguang/Chinese Journal of Lasers, 2010, 37 (SUPPL. 1): : 350 - 357
12345