Parameters optimization on the lapping process for advanced ceramics by applying Taguchi method

被引：2
|
作者：
Yuan, Julong [1 ]
Lv, Binghai [1 ,2 ]
Zhou, Zhaozhong [1 ]
Tao, Baochun [1 ]
机构：
[1] Zhejiang Univ Technol, Ultraprecis Machining Res Ctr, Hangzhou 310014, Peoples R China
[2] Harbin Inst Technol, Dept Engn Mech, Harbin 15001, Peoples R China
来源：
ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY II | 2006年 / 532-533卷
关键词：
optimum design; Taguchi method; advanced ceramics; lapping;
D O I：
10.4028/www.scientific.net/MSF.532-533.488
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The surface quality is a critical factor affecting the performance and reliability of advanced ceramics. This paper focuses on the application of Taguchi method for optimization of advanced ceramics lapping process parameters to obtain the best finish. An optimization experiment for lapping silicon wafer with Al2O3 was designed by Taguchi method. Surface roughness Ra and Rt are considered as criteria for optimization. Influence of parameters involving load, speed, and slurry concentration for a given workmaterial with given abrasive (material and size) are discussed, and the optimum lapping conditions are figured out. Compared with single parameter experimental results, it illustrates that the experiment design based on Taguchi method can successfully applied to determine the optimum processing conditions for advanced ceramics lapping process.
引用
收藏
页码：488 / +
页数：2
相关论文
共 50 条
  • [1] Parameters Optimization on the Lapping Process with Porous Self-Generation Superabrasive Tool by Applying Taguchi Method
    Lv, Binghai
    Wu, Zhe
    Yuan, Julong
    Deng, Qianfa
    Zhao, Ping
    ADVANCES IN ABRASIVE TECHNOLOGY XV, 2012, 565 : 267 - +
  • [2] Parameters optimization on the lapping process of 9Cr18 with Taguchi method
    Zheng, Xiaofeng
    Yuan, Julong
    Wen', Donghui
    Lou, Feiyan
    ADVANCES IN GRINDING AND ABRASIVE TECHNOLOGY XIV, 2008, 359-360 : 158 - 161
  • [3] Optimization of process parameters for ultrasonic drilling of advanced engineering ceramics using the Taguchi approach
    Jadoun, R. S.
    Kumar, Pradeep
    Mishra, B. K.
    Mehta, R. C. S.
    ENGINEERING OPTIMIZATION, 2006, 38 (07) : 771 - 787
  • [4] APPLICATION OF TAGUCHI AND ANOVA IN OPTIMIZATION OF PROCESS PARAMETERS OF LAPPING OPERATION FOR CAST IRON
    Parate, P. R.
    Yarasu, R. B.
    JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, 2013, 4 : 479 - 487
  • [5] APPLICATION OF TAGUCHI METHOD IN THE OPTIMIZATION OF PROCESS PARAMETERS FOR CONICITY OF HOLES IN ULTRASONIC DRILLING OF E\NGINEERING CERAMICS
    Mehta, R. C. S.
    Jadoun, R. S.
    Kumar, Pradeep
    Mishra, B. K.
    ADVANCED PROCESSING AND MANUFACTURING TECHNOLOGIES FOR STRUCTURAL AND MULTIFUNCTIONAL MATERIALS, 2008, 28 (07): : 167 - +
  • [6] Optimization of vacuum casting process parameters using Taguchi method
    Ahmad, Mohd Nazri
    Alkahari, Mohd Rizal
    Basir, Mohamad Faris Mohd
    Maidin, Nurul Ain
    Wahid, Mohammad Khalid
    Ab Rahman, Mohd Hidayat
    Osman, Mohd Hairizal
    PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2018 (MERD), 2018, : 146 - 147
  • [7] Optimization of RSW process parameters on tensile strength by taguchi method
    Raja, S.
    Vignesh, K.
    Ravikumar, M.
    Sanjeevi, R.
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2023, 24 (01): : 153 - 157
  • [8] Optimization Of Welding Process Parameters By Taguchi Method (Experimentation and Application)
    Ramreddy, B.
    Choudhary, D.
    Kumar, Sujeet
    DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH, 2014, 592-594 : 663 - 667
  • [9] Optimization of Process Parameters of Submerged Arc Welding by Taguchi Method
    Vishwakarma, Sameer
    Kumar, Vijay
    MATERIALS TODAY-PROCEEDINGS, 2021, 47 : 7067 - 7072
  • [10] Optimization of Forming Process Parameters for Automotive Advanced High Strength Steel Parts Using the Taguchi Method
    Sunanta, Aekkapon
    Julsri, Weerapong
    Suranuntchai, Surasak
    ENGINEERING JOURNAL-THAILAND, 2024, 28 (10): : 25 - 46
12345