Curing kinetics of anisotropic conductive adhesive film

Polymer-based conductive-adhesive materials have become widely used in many electronic packaging interconnect applications, such as. chip-an-glass, chip-on-flex, etc. Among all the conductive-adhesive materials, anisotropic conductive adhesive film (ACF) is an attractive interconnect material because of its fine pitch capability. Anisotropic conductive-adhesive film is a thermosetting, epoxy matrix impregnated with a small amount of electrically conductive particles. During component assembly, the epoxy resin is cured to provide mechanical connection, and the conducting medium provides electrical connection in the z direction. The thermal cure process is critical to develop the ultimate electrical and mechanical properties of the ACE In this paper, the curing reaction of ACF was studied with a differential scanning calorimeter (DSC) under isothermal conditions in the range of 120-180degreesC. An autocatalyzed kinetic model was used to describe the curing reaction. The rate constant and the reaction orders were determined and used to predict the progress of the curing reaction. A good agreement is found between the proposed kinetic model and the experimental reaction-rate data. The reaction-rate constants were correlated with the isothermal temperature by the Arrhenius equation. The glass-transition temperature also has been studied as a function of cure degree and moisture absorption.