Surface Modification of Hypereutectic Al-Si Alloy via Friction Stir Process

被引：2
|
作者：
Abdulmalik, S. S. [1 ]
Ahmad, R. [1 ]
Asmael, M. B. A. [1 ]
机构：
[1] Univ Tun Hussein Onn Malaysia, Dept Mfg & Ind Engn, Fac Mech & Mfg Engn, Batu Pahat 86400, Johor, Malaysia
来源：
7TH INTERNATIONAL CONFERENCE ON MECHANICAL AND MANUFACTURING ENGINEERING (ICME'16) | 2017年 / 1831卷
关键词：
MECHANICAL-PROPERTIES; MICROSTRUCTURE; IMPROVEMENT; BEHAVIOR;
D O I：
10.1063/1.4981178
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The surfaces of cast hypereutectic Al-Si-Cu-Ni-La alloy plate was subjected to single pass Friction Stir Processing (FSP) with the aim of decreasing the Si and intermetallic particles size, porosity, and enhancing tensile properties. After FSP, the FS-processed sample shows an improvement in tensile strength value of about 27.5% compared to the as cast base alloy. Optical and scanning electron micrographs indicated that FSP significantly decreases the size of Si, intermetallic particles, and reduced porosity in the alloy, which contributed to the enhancement in tensile properties.
引用
收藏
页数：6
相关论文
共 50 条
  • [41] Effects of cooling rate on primary Si in hypereutectic Al-Si alloy
    Kunming University of Science and Technology, Kunming 650093, China
    Tezhong Zhuzao Ji Youse Hejin, 2006, 1 (34-35):
  • [42] Characteristics and microstructure of hypereutectic Al-Si alloy powder by ultrasonic gas atomization process
    Xie, Zhuangde
    Sun, Jianfei
    Shen, Jun
    Zhou, Bide
    Su, Zhijun
    Le, Hongsheng
    Fenmo Yejin Jishu/Powder Metallurgy Technology, 2001, 19 (06): : 331 - 334
  • [43] Fabrication of Various Dimple Shapes and Arrays on a Hypereutectic Al-Si Alloy Piston Surface Using a Turning Process
    Dali, Mohd Nor Azam bin Mohd
    Ghani, Jaharah A.
    Haron, Che Hassan Che
    Hassan, Sharudin
    PROCEEDINGS OF INTERNATIONAL CONFERENCE ON ADVANCED PROCESSES AND SYSTEMS IN MANUFACTURING (APSIM 2016), 2016, : 77 - 78
  • [44] MODIFICATION OF HYPEREUTECTIC Al-Si ALLOY SURFACE LAYER STRUCTURE BY Nb ALLOYING UNDER HIGH TEMPERATURE PLASMA IMPACT
    Cherenda, N. N.
    Bibik, N. V.
    Astashynski, V. M.
    Kuzmitski, A. M.
    HIGH TEMPERATURE MATERIAL PROCESSES, 2022, 26 (02): : 91 - 100
  • [45] Effect of Casting Die Cooling on Solidification Process and Microstructure of Hypereutectic Al-Si Alloy
    Wladysiak, R.
    Kozun, A.
    Pacyniak, T.
    ARCHIVES OF FOUNDRY ENGINEERING, 2016, 16 (04) : 175 - 180
  • [46] Characteristics and microstructure of a hypereutectic Al-Si alloy powder by ultrasonic gas atomization process
    Shen, J.
    Xie, Z.D.
    Zhou, B.D.
    Li, Q.C.
    Su, Z.J.
    Le, H.S.
    2001, Chinese Society of Metals (17):
  • [47] Characteristics and microstructure of a hypereutectic Al-Si alloy powder by ultrasonic gas atomization process
    Shen, J
    Xie, ZD
    Zhou, B
    Li, QC
    Su, ZJ
    Le, HS
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2001, 17 (01) : 79 - 80
  • [48] Effects of prior ECAP process on the dynamic impact behaviors of hypereutectic Al-Si alloy
    Damavandi, Esmaeil
    Nourouzi, Salman
    Rabiee, Sayed Mahmood
    Jamaati, Roohollah
    Tiamiyu, Ahmed A.
    Szpunar, Jerzy A.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 793
  • [49] Characteristics and Microstructure of a Hypereutectic Al-Si Alloy Powder by Ultrasonic Gas Atomization Process
    Jun SHEN
    Zhuangde XIE
    Bide ZHOU and Qingchun LI School of Materials Science and Engineering
    JournalofMaterialsScience&Technology, 2001, (01) : 79 - 80
  • [50] An investigation into surface roughness of burnished hypereutectic Al-Si alloy based on the taguchi techniques
    Han, LF
    Xia, W
    Li, YY
    Chen, WP
    ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY, 2004, 471-472 : 790 - 794
12345