Surface Modification of Hypereutectic Al-Si Alloy via Friction Stir Process

被引：2
|
作者：
Abdulmalik, S. S. [1 ]
Ahmad, R. [1 ]
Asmael, M. B. A. [1 ]
机构：
[1] Univ Tun Hussein Onn Malaysia, Dept Mfg & Ind Engn, Fac Mech & Mfg Engn, Batu Pahat 86400, Johor, Malaysia
来源：
7TH INTERNATIONAL CONFERENCE ON MECHANICAL AND MANUFACTURING ENGINEERING (ICME'16) | 2017年 / 1831卷
关键词：
MECHANICAL-PROPERTIES; MICROSTRUCTURE; IMPROVEMENT; BEHAVIOR;
D O I：
10.1063/1.4981178
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The surfaces of cast hypereutectic Al-Si-Cu-Ni-La alloy plate was subjected to single pass Friction Stir Processing (FSP) with the aim of decreasing the Si and intermetallic particles size, porosity, and enhancing tensile properties. After FSP, the FS-processed sample shows an improvement in tensile strength value of about 27.5% compared to the as cast base alloy. Optical and scanning electron micrographs indicated that FSP significantly decreases the size of Si, intermetallic particles, and reduced porosity in the alloy, which contributed to the enhancement in tensile properties.
引用
收藏
页数：6
相关论文
共 50 条
  • [21] Influence of Processing Parameters on Microstructure and Surface Hardness of Hypereutectic Al-Si-Fe-Mg Alloy via Friction Stir Processing
    Liu, Quan
    Chen, Xiaomi
    Liu, Kun
    Cristino, Valentino A. M.
    Lo, Kin-Ho
    Xie, Zhengchao
    Guo, Dawei
    Tam, Lap-Mou
    Kwok, Chi-Tat
    COATINGS, 2024, 14 (02)
  • [22] Enhancing the machinability of hypereutectic Al-30Si alloy by friction stir processing
    Rao, A. G.
    Deshmukh, V. P.
    Prabhu, N.
    Kashyap, B. P.
    JOURNAL OF MANUFACTURING PROCESSES, 2016, 23 : 130 - 134
  • [23] Ductilizing of cast hypereutectic Al-17%Si alloy by friction stir processing
    Saini, Nitin
    Pandey, Chandan
    Dwivedi, Dheerendra Kumar
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2018, 232 (06) : 696 - 701
  • [24] Properties Augmentation of Cast Hypereutectic Al–Si Alloy Through Friction Stir Processing
    William P. Bates
    Vivek Patel
    Harikrishna Rana
    Joel Andersson
    Jeroen De Backer
    Mattias Igestrand
    Livan Fratini
    Metals and Materials International, 2023, 29 : 215 - 228
  • [25] The modification of electroless deposited Ni-P master alloy for hypereutectic Al-Si alloy
    Guo, Jian
    Liu, Ying
    Fan, Pengxu
    Qu, Haixia
    Quan, Tao
    JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 495 (01) : 45 - 49
  • [26] Properties Augmentation of Cast Hypereutectic Al-Si Alloy Through Friction Stir Processing (vol 29, pg 215, 2023)
    Bates, William P.
    Patel, Vivek
    Rana, Harikrishna
    Andersson, Joel
    De Backer, Jeroen
    Igestrand, Mattias
    Fratini, Livan
    METALS AND MATERIALS INTERNATIONAL, 2023, 29 (03) : 876 - 876
  • [27] Modification performance of the Al-P master alloy for eutectic and hypereutectic Al-Si alloys
    Liu, XF
    Qiao, JG
    Liu, YX
    Li, ST
    Bian, XF
    ACTA METALLURGICA SINICA, 2004, 40 (05) : 471 - 476
  • [28] Mechanical property of hypereutectic Al-Si alloy applied by Compressive Torsion Process
    Kume, Yuji
    Tahara, Shotaro
    Kobashi, Makoto
    Kanetake, Naoyuki
    Keikinzoku/Journal of Japan Institute of Light Metals, 2013, 63 (05): : 182 - 187
  • [29] Effect of Squeeze Cast Process Parameters on Fluidity of Hypereutectic Al-Si Alloy
    Jong-Kyu Baek
    Hae-Wook Kwon
    Journal of Materials Science & Technology, 2008, (01) : 7 - 11
  • [30] Effect of squeeze cast process parameters on fluidity of hypereutectic Al-Si alloy
    Baek, Jong-Kyu
    Kwon, Hae-Wook
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2008, 24 (01) : 7 - 11
12345