Performance investigation of surface roughness in hard turning of AISI 52100 steel - RSM approach

被引：0
|
作者：
Allu, Venkat Pradeep [1 ,2 ]
Raju, D. Linga [3 ]
Ramakrishna, S. [4 ]
机构：
[1] JNTUK, Dept Mech Engn, Kakinada, AP, India
[2] Vignans Inst Engn Women, Dept Mech Engn, Visakhapatnam, AP, India
[3] JNTUK, Dept Mech Engn, Kakinada, AP, India
[4] Gayatri Vidhya Parishad Coll Engn, Dept Mech Engn, Visakhapatnam, AP, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2019年 / 18卷
关键词：
Hard turning; wiper inserts; nose radius; response surface methodology; surface roughness; CUTTING FORCES; WIPER;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The influence of type of insert, tool nose radius, cutting speed, feed rate and depth of cut on surface roughness during dry hard turning of AISI 52100 steel was investigated. ANOVA results show type of insert is the most influencing parameter with a contribution of 45.68%, nose radius with 34.11% and feed rate of 17.98%. A quadratic model of high adequacy (R-2 = 99.03%) was predicted through Response surface methodology. Response surface optimizer revealed that wiper insert with nose radius of 1.2mm, feed of 0.05mm/rev, cutting speed of 70mm and depth of cut of 0.2mm yield optimum roughness of 1.69 mu m. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码：261 / 269
页数：9
相关论文
共 50 条
  • [21] RSM Based Investigations on the Effects of Cutting Parameters on Surface Integrity during Cryogenic Hard Turning of AISI 52100
    Shihab, Suha K.
    Khan, Zahid A.
    Siddiquee, Arshad Noor
    [J]. JOURNAL FOR MANUFACTURING SCIENCE AND PRODUCTION, 2015, 15 (03) : 309 - 318
  • [22] Effect of MQL on roughness, white layer and microhardness in hard turning of AISI 52100
    Pradeep, Allu Venkat
    Dumpala, Lingaraju
    Ramakrishna, Shinagam
    [J]. EMERGING MATERIALS RESEARCH, 2019, 8 (01) : 29 - 43
  • [23] FE modeling of microstructural changes in hard turning of AISI 52100 steel
    G. L. Manco
    S. Caruso
    G. Rotella
    [J]. International Journal of Material Forming, 2010, 3 : 447 - 450
  • [24] Analysis of white layers formed in hard turning of AISI 52100 steel
    Ramesh, A
    Melkote, SN
    Allard, LF
    Riester, L
    Watkins, TR
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 390 (1-2): : 88 - 97
  • [25] Effect of surface integrity of hard turned AISI 52100 steel on fatigue performance
    Smith, Stephen
    Melkote, Shreyes N.
    Lara-Curzio, Edgar
    Watkins, Thomas R.
    Allard, Larry
    Riester, Laura
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 459 (1-2): : 337 - 346
  • [26] Statistical analysis of surface roughness and cutting forces using response surface methodology in hard turning of AISI 52100 bearing steel with CBN tool
    Bouacha, Khaider
    Yallese, Mohamed Athmane
    Mabrouki, Tarek
    Rigal, Jean-Francois
    [J]. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2010, 28 (03): : 349 - 361
  • [27] FE MODELING OF MICROSTRUCTURAL CHANGES IN HARD TURNING OF AISI 52100 STEEL
    Manco, G. L.
    Caruso, S.
    Rotella, G.
    [J]. INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2010, 3 : 447 - 450
  • [28] Experimental investigation on CBN turning of hardened AISI 52100 steel
    Chou, YK
    Evans, CJ
    Barash, MM
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 124 (03) : 274 - 283
  • [29] Optimizing flank wear and surface roughness during hard turning of AISI D3 steel by Taguchi and RSM methods
    Dureja, J. S.
    Singh, Rupinder
    Bhatti, Manpreet S.
    [J]. PRODUCTION AND MANUFACTURING RESEARCH-AN OPEN ACCESS JOURNAL, 2014, 2 (01): : 767 - 783
  • [30] Experimental investigation and optimization for surface roughness for turning of AISI 1040 steel
    Murugesan, Seenivasan
    Thangamuthu, Venugopal
    Shivaji, Rohokale Milind
    Kumar, Suresh R.
    [J]. JOURNAL OF CERAMIC PROCESSING RESEARCH, 2022, 23 (03): : 367 - 372
12345