The Effect of Weld Geometry and Post-Weld Heat Treatment on the Corrosion Behaviour of Austenitic Stainless Steel Immersed in 1.0 M NaCl Solution

被引：0
|
作者：
Oluwole, Oladele Isiaka [1 ]
Omotoyinbo, Joseph Ajibade [1 ]
Damilola, Akinwekomi Akeem [1 ]
机构：
[1] Fed Univ Technol, Dept Met & Mat Engn, Akure Ondo State, Nigeria
来源：
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS | 2010年 / 13卷 / 01期
关键词：
welding parameters; weld geometry; post-weld heat treatment; austenitic stainless steel;
D O I：
10.1590/S1516-14392010000100006
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The variation of welding parameters such as weld geometry and post-weld heat treatment on the corrosion behaviour of austenitic stainless steel in a saline environment of 1.0 M NaCl was investigated in this work. Rods of austenitic stainless steel of known chemical composition were prepared and welded using electric arc welding technique varying the aforementioned parameters. Thereafter, samples for the corrosion behaviour investigation were then cut out of the welded rods. The analysis of the experimental data revealed that the best weld geometry was chamfered and a post-weld heat treatment carried out at temperatures in excess of 700 degrees C followed by air cooling improves the quality of a weld.
引用
收藏
页码：21 / 24
页数：4
相关论文
共 50 条
  • [41] Submerged Arc Stainless Steel Strip Cladding-Effect of Post-Weld Heat Treatment on Thermal Fatigue Resistance
    Kuo, I. C.
    Chou, C. P.
    Tseng, C. F.
    Lee, I. K.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2009, 18 (02) : 154 - 161
  • [42] ROOM-TEMPERATURE STRESS-CORROSION CRACKING RESISTANCE OF POST-WELD HEAT-TREATED AUSTENITIC WELD METALS
    KRISHNAN, KN
    RAO, KP
    CORROSION, 1990, 46 (09) : 735 - 745
  • [43] The effect of short time post-weld heat treatment on the fatigue crack growth of 2205 duplex stainless steel welds
    Young, M. C.
    Tsay, L. W.
    Shin, C. S.
    Chan, S. L. I.
    INTERNATIONAL JOURNAL OF FATIGUE, 2007, 29 (12) : 2155 - 2162
  • [44] Dissimilar Laser Welding of Austenitic Stainless Steel and Abrasion-Resistant Steel: Microstructural Evolution and Mechanical Properties Enhanced by Post-Weld Heat Treatment
    Hietala, Mikko
    Jaskari, Matias
    Ali, Mohammed
    Jarvenpaa, Antti
    Hamada, Atef
    MATERIALS, 2021, 14 (19)
  • [45] Effects of post-weld heat treatment on dissimilar metal joint between aluminum alloy and stainless steel
    Dong, Honggang
    Liao, Chuanqing
    Yang, Liqun
    Dong, Chuang
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 550 : 423 - 428
  • [46] Effect of post-weld heat treatment (PWHT) on microstructure and corrosion behavior in ENiCrFe-7 weld overlay cladding materials
    Guo, P. L.
    Han, H. G.
    Lu, Y. H.
    Shoji, T.
    JOURNAL OF NUCLEAR MATERIALS, 2022, 558
  • [47] The relationship between austenite stabiliser element and post-weld heat treatment on the corrosion behaviour of the welded duplex stainless steel made by gas tungsten arc welding
    Tahaei, Ali
    Bagheri Vanani, Behrouz
    Abbasi, Mahmoud
    Merlin, Matia
    Garagnani, Gian Luca
    MATERIALS SCIENCE AND TECHNOLOGY, 2025, 41 (01) : 54 - 65
  • [48] Effect of post-weld heat treatment on microstructure, crystallography, and mechanical properties of laser beam welded AISI 904L super austenitic stainless steel
    Kose, Ceyhun
    ENGINEERING FAILURE ANALYSIS, 2024, 158
  • [49] Corrosion Behavior of 316L and Alloy 182 Dissimilar Weld Joint with Post-Weld Heat Treatment
    Nery Garcia, Joao Henrique
    dos Santos, Neice Ferreira
    Esteves, Luiza
    da Costa Campos, Wagner Reis
    Rabelo, Emerson Giovani
    MATERIA-RIO DE JANEIRO, 2019, 24 (03):
  • [50] Effect of Post-Weld Heat Treatment on the Corrosion Behavior of Resistance Spot Welded Super Duplex Stainless UNS S 32750
    Shin, Byung-hyun
    Park, Sanghyup
    Park, Junghyun
    Kim, Dohyung
    Hwang, Myoungwon
    Chung, Wonsub
    INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2019, 14 (03): : 2430 - 2441
12345