The Effect of Weld Geometry and Post-Weld Heat Treatment on the Corrosion Behaviour of Austenitic Stainless Steel Immersed in 1.0 M NaCl Solution

被引：0
|
作者：
Oluwole, Oladele Isiaka [1 ]
Omotoyinbo, Joseph Ajibade [1 ]
Damilola, Akinwekomi Akeem [1 ]
机构：
[1] Fed Univ Technol, Dept Met & Mat Engn, Akure Ondo State, Nigeria
来源：
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS | 2010年 / 13卷 / 01期
关键词：
welding parameters; weld geometry; post-weld heat treatment; austenitic stainless steel;
D O I：
10.1590/S1516-14392010000100006
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The variation of welding parameters such as weld geometry and post-weld heat treatment on the corrosion behaviour of austenitic stainless steel in a saline environment of 1.0 M NaCl was investigated in this work. Rods of austenitic stainless steel of known chemical composition were prepared and welded using electric arc welding technique varying the aforementioned parameters. Thereafter, samples for the corrosion behaviour investigation were then cut out of the welded rods. The analysis of the experimental data revealed that the best weld geometry was chamfered and a post-weld heat treatment carried out at temperatures in excess of 700 degrees C followed by air cooling improves the quality of a weld.
引用
收藏
页码：21 / 24
页数：4
相关论文
共 50 条
  • [31] Effect of Post-Weld Heat Treatment Temperatures on Microstructure, Intergranular Corrosion Resistance, and Mechanical Properties of 4130 Steel with Inconel 625 Weld Overlay
    Longlong Guo
    Fei Xiao
    Fan Wang
    Zebing Wei
    Yong Zhang
    Journal of Failure Analysis and Prevention, 2021, 21 : 1775 - 1783
  • [32] Effect of Post-Weld Heat Treatment Temperatures on Microstructure, Intergranular Corrosion Resistance, and Mechanical Properties of 4130 Steel with Inconel 625 Weld Overlay
    Guo, Longlong
    Xiao, Fei
    Wang, Fan
    Wei, Zebing
    Zhang, Yong
    JOURNAL OF FAILURE ANALYSIS AND PREVENTION, 2021, 21 (05) : 1775 - 1783
  • [33] Effect of post-weld heat treatment on microstructure evolution and pitting corrosion behavior of UNS S31803 duplex stainless steel welds
    Zhang, Ziying
    Wang, Zhiyu
    Jiang, Yiming
    Tan, Hua
    Han, Dong
    Guo, Yanjun
    Li, Jin
    CORROSION SCIENCE, 2012, 62 : 42 - 50
  • [34] Effect of post-weld heat treatment (PWHT) on the intergranular corrosion of ENiCrFe-7 weld overlay cladding materials
    Guo, P. L.
    Ling, L. G.
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (04): : 8636 - 8645
  • [35] The effect of post-weld heat treatment on microstructure of AISI 316L steel
    Gojić, Mirko
    Kozuh, Stjepan
    Kosec, Borut
    Welding in the World, 2007, 51 (SPEC. ISS.) : 765 - 774
  • [36] Explosive cladding and post-weld heat treatment of mild steel and titanium
    Prasanthi, T. N.
    Sudha, C. Ravikirana
    Saroja, S.
    MATERIALS & DESIGN, 2016, 93 : 180 - 193
  • [37] Effect of post weld heat treatment on the weld joints of spheroidal graphite cast iron joined with mild steel and austenitic stainless-steel filler materials
    Takahashi J.
    Nakashima H.
    Ojima J.
    Fujii N.
    Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, 2021, 39 (01): : 24 - 31
  • [38] Effect of post-weld heat treatment on the wear resistance of hardfacing martensitic steel deposits
    Gualco A.
    Svoboda H.G.
    Surian E.S.
    de Vedia L.A.
    Welding International, 2010, 24 (04) : 258 - 265
  • [39] Effect of Groove Design and Post-Weld Heat Treatment on Microstructure and Mechanical Properties of P91 Steel Weld
    Pandey, C.
    Mahapatra, M. M.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2016, 25 (07) : 2761 - 2775
  • [40] Effect of Groove Design and Post-Weld Heat Treatment on Microstructure and Mechanical Properties of P91 Steel Weld
    C. Pandey
    M. M. Mahapatra
    Journal of Materials Engineering and Performance, 2016, 25 : 2761 - 2775
12345