Increasing in the wear resistance of injection molds made of 1.2343 steel using Ti/TiN/TiCN/nc-TiCN:a-C/nc-TiC:a-C/a-C nanocomposite coating

被引：1

作者：

Rupetsov, Velko ^{[1
]}

Mishev, Georgi ^{[2
]}

Dishliev, Stefan ^{[3
]}

Kopanov, Viktor ^{[4
]}

Chitanov, Vassiliy ^{[4
]}

Kolaklieva, Lilyana ^{[4
]}

Pashinski, Chavdar ^{[2
,4
]}

机构：

[1] PU Paisii Hilendarski, Tech Coll Smolyan, 28 Dicho Petrov St, Smoljan 4700, Bulgaria

[2] Tech Univ Sofia, Branch Plovdiv, 25 Tsanko Diustabanov St, Plovdiv 4000, Bulgaria

[3] Univ Food Technol, 26 Maritsa Blvd, Plovdiv 4000, Bulgaria

[4] Bulgarian Acad Sci, Cent Lab Appl Phys, 61 Sankt Petersburg Blvd, Plovdiv 4000, Bulgaria

来源：

13TH INTERNATIONAL CONFERENCE ON TRIBOLOGY (ROTRIB'16) | 2017年 / 174卷

关键词：

D O I：

10.1088/1757-899X/174/1/012064

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Injection molds used in production of plastic components are subject of heavy abrasion wear. The increase of their wear resistance significantly reduces the production cost. In the current work are presented research results of the wear resistance of injection molds made of steel 1.2343, coated with Ti/TiN/TiCN/nc-TiCN:a-C/nc-TiC:a-C/a-C. The study of the wear rate was done using the volumetric method and the influence of the trace length was investigated. The coating thickness, nanohardness, elastic modulus and adhesion were also tested. The coating was applied on unhardened ground specimens, hardened ground specimens and hardened polished specimens.

引用

页数：8

共 50 条

[31] Friction and wear behaviour of TiN/Au, TiN/MoS2 and TiN/TiCN/a-C:H coatings
Ma, KJ
Chao, CL
Liu, DS
Chen, YT
Shieh, MB
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 127 (02) : 182 - 186
[32] The influence of different power supply modes on the microstructure, mechanical, and corrosion properties of nc-TiC/a-C:H nanocomposite coatings
Lou, Bih-Show
Hsiao, Yu-Tung
Chang, Li-Chun
Diyatmika, Wahyu
Lee, Jyh-Wei
SURFACE & COATINGS TECHNOLOGY, 2021, 422
[33] Low friction coefficient of superhard nc-TiC/a-C:H nanocomposite coatings deposited by filtered cathodic vacuum arc
Luo, J.
Ou, Y. X.
Zhang, Z. Q.
Pang, P.
Chen, L.
Liao, B.
Shang, H. Z.
Zhang, X.
Wu, X. Y.
MATERIALS RESEARCH EXPRESS, 2019, 6 (09):
[34] Controlling friction and wear of nc-WC/a-C(Al) nanocomposite coating by lubricant/additive synergies
Zhou, Shengguo
Wang, Liping
Xue, Qunji
SURFACE & COATINGS TECHNOLOGY, 2012, 206 (10): : 2698 - 2705
[35] Evaluation of composition, mechanical properties and structure of nc-TiC/a-C:H coatings prepared by balanced magnetron sputtering
Soucek, Pavel
Schmidtova, Tereza
Zabransky, Lukas
Bursikova, Vilma
Vasina, Petr
Caha, Ondfej
Jilek, Mojmir
El Mel, Abdelaziz
Tessier, Pierre-Yves
Schaefer, Jan
Bursik, Jiri
Perina, Vratislav
Miksova, Romana
SURFACE & COATINGS TECHNOLOGY, 2012, 211 : 111 - 116
[36] nc-TiC/a-C纳米复合多层薄膜的制备及其摩擦学性能的研究
彭燚
张玉娟
翟玉浩
杨坤鹏
张晟卯
张平余
王超峰
摩擦学学报, 2015, 35 (02) : 190 - 197
[37] Microstructure, mechanical and tribological properties of the nc-CrxCy/a-C and nc-CrxCy/a-C:H nanocomposite coatings on oxygen-hardened Ti-6Al-4V alloy
Zimowski, Slawomir
Moskalewicz, Tomasz
Kot, Marcin
Wendler, Bogdan
Czyrska-Filemonowicz, Aleksandra
SURFACE AND INTERFACE ANALYSIS, 2012, 44 (08) : 1225 - 1228
[38] MICROSTRUCTURE AND PROPERTIES OF nc-WC/a-C COATING DEPOSITED ON HIGH SPEED STEEL BY MAGNETRON SPUTTERING
Cempura, Grzegorz
Moskalewicz, Tomasz
Wendler, Bogdan
Lofaj, Frantisek
Czyrska-Filemonowicz, Aleksandra
CHEMICKE LISTY, 2012, 106 : S393 - S394
[39] Tribological properties of nc-TiC/a-C:H coatings prepared by magnetron sputtering at low and high ion bombardment of the growing film
Soucek, Pavel
Schmidtova, Tereza
Bursikova, Vilma
Vasina, Petr
Pei, Y. T.
De Hos, J. Th. M.
Caha, Ondrej
Perina, Vratislav
Miksova, Romana
Malinsky, Petr
SURFACE & COATINGS TECHNOLOGY, 2014, 241 : 64 - 73
[40] Preparation, Characterization, and Properties of Novel Carbon-Based nc-CrC/a-C(Al) Nanocomposite Coating
Chen, Hao
Zhou, Shengguo
Ma, Liqiu
Wang, Liping
TRIBOLOGY TRANSACTIONS, 2014, 57 (02) : 267 - 274

← 1 2 3 4 5 →