Increasing in the wear resistance of injection molds made of 1.2343 steel using Ti/TiN/TiCN/nc-TiCN:a-C/nc-TiC:a-C/a-C nanocomposite coating

被引：1

作者：

Rupetsov, Velko ^{[1
]}

Mishev, Georgi ^{[2
]}

Dishliev, Stefan ^{[3
]}

Kopanov, Viktor ^{[4
]}

Chitanov, Vassiliy ^{[4
]}

Kolaklieva, Lilyana ^{[4
]}

Pashinski, Chavdar ^{[2
,4
]}

机构：

[1] PU Paisii Hilendarski, Tech Coll Smolyan, 28 Dicho Petrov St, Smoljan 4700, Bulgaria

[2] Tech Univ Sofia, Branch Plovdiv, 25 Tsanko Diustabanov St, Plovdiv 4000, Bulgaria

[3] Univ Food Technol, 26 Maritsa Blvd, Plovdiv 4000, Bulgaria

[4] Bulgarian Acad Sci, Cent Lab Appl Phys, 61 Sankt Petersburg Blvd, Plovdiv 4000, Bulgaria

来源：

13TH INTERNATIONAL CONFERENCE ON TRIBOLOGY (ROTRIB'16) | 2017年 / 174卷

关键词：

D O I：

10.1088/1757-899X/174/1/012064

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Injection molds used in production of plastic components are subject of heavy abrasion wear. The increase of their wear resistance significantly reduces the production cost. In the current work are presented research results of the wear resistance of injection molds made of steel 1.2343, coated with Ti/TiN/TiCN/nc-TiCN:a-C/nc-TiC:a-C/a-C. The study of the wear rate was done using the volumetric method and the influence of the trace length was investigated. The coating thickness, nanohardness, elastic modulus and adhesion were also tested. The coating was applied on unhardened ground specimens, hardened ground specimens and hardened polished specimens.

引用

页数：8

共 50 条

[21] Structure and mechanical properties of nc-TiC/a-C:H nanocomposite films deposited by filtered cathodic arc technique
Yu-Hao Zhai
Yu-Juan Zhang
Yi Peng
Sheng-Mao Zhang
Ping-Yu Zhang
Xiao-Min Zhang
Rare Metals, 2016, 35 : 177 - 183
[22] Structure and mechanical properties of nc-TiC/a-C:H nanocomposite films deposited by filtered cathodic arc technique
Zhai, Yu-Hao
Zhang, Yu-Juan
Peng, Yi
Zhang, Sheng-Mao
Zhang, Ping-Yu
Zhang, Xiao-Min
RARE METALS, 2016, 35 (02) : 177 - 183
[23] Nanostructural and mechanical properties of nanocomposite nc-TiC/a-C:H films deposited by reactive unbalanced magnetron sputtering
Zehnder, T
Schwaller, P
Munnik, F
Mikhailov, S
Patscheider, J
JOURNAL OF APPLIED PHYSICS, 2004, 95 (08) : 4327 - 4334
[24] Low friction nanocrystallino-amorphous nc-TiC/a-C coating on Ti-6Al-7Nb alloy
Moskalewicz, T.
Karbowniczek, J.
Wendler, B.
Cempura, G.
Czyrska-Filemonowicz, A.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE, 2012, 6 : 54 - 55
[25] Nanostructural and mechanical properties of nanocomposite nc-TiC/a-C:H films deposited by reactive unbalanced magnetron sputtering
Zehnder, T.
Schwaller, P.
Munnik, F.
Mikhailov, S.
Patscheider, J.
Journal of Applied Physics, 2004, 95 (08): : 4327 - 4334
[26] Structure and mechanical properties of nc-TiC/a-C:H nanocomposite films deposited by filtered cathodic arc technique
Yu-Hao Zhai
Yu-Juan Zhang
Yi Peng
Sheng-Mao Zhang
Ping-Yu Zhang
Xiao-Min Zhang
Rare Metals, 2016, 35 (02) : 177 - 183
[27] On the significance of running-in of hard nc-TiC/a-C:H coating for short-term repeating machining
Zemlicka, Radek
Soucek, Pavel
Vogl, Petr
Jilek, Mojmir
Bursikova, Vilma
Vasina, Petr
Pei, Y. T.
SURFACE & COATINGS TECHNOLOGY, 2017, 315 : 17 - 23
[28] On the origin of a third spectral component of C1s XPS-spectra for nc-TiC/a-C nanocomposite thin films
Lewin, E.
Persson, P. O. A.
Lattemann, M.
Stueber, M.
Gorgoi, M.
Sandell, A.
Ziebert, C.
Schaedfers, F.
Braun, W.
Halbritter, J.
Ulrich, S.
Eberhardt, W.
Hultman, L.
Siegbahn, H.
Svensson, S.
Jansson, U.
SURFACE & COATINGS TECHNOLOGY, 2008, 202 (15): : 3563 - 3570
[29] Microstructure and properties of nc-TiC/a-C:H films deposited by radio frequency reactive sputtering
Liu, X. Q.
Yang, J.
Hao, J. Y.
Liu, W. M.
MATERIALS SCIENCE AND TECHNOLOGY, 2011, 27 (11) : 1669 - 1673
[30] Effect of filter coil current on properties of nc-TiC/a-C:H nanocomposite film prepared by dual plasma technique
Wang, Yaohui
Zhang, Xu
Wu, Xianying
Zhang, Huixing
Zhang, Xiaoji
SURFACE REVIEW AND LETTERS, 2007, 14 (06) : 1143 - 1148

← 1 2 3 4 5 →