Increasing in the wear resistance of injection molds made of 1.2343 steel using Ti/TiN/TiCN/nc-TiCN:a-C/nc-TiC:a-C/a-C nanocomposite coating

被引：1
|
作者：
Rupetsov, Velko [1 ]
Mishev, Georgi [2 ]
Dishliev, Stefan [3 ]
Kopanov, Viktor [4 ]
Chitanov, Vassiliy [4 ]
Kolaklieva, Lilyana [4 ]
Pashinski, Chavdar [2 ,4 ]
机构：
[1] PU Paisii Hilendarski, Tech Coll Smolyan, 28 Dicho Petrov St, Smoljan 4700, Bulgaria
[2] Tech Univ Sofia, Branch Plovdiv, 25 Tsanko Diustabanov St, Plovdiv 4000, Bulgaria
[3] Univ Food Technol, 26 Maritsa Blvd, Plovdiv 4000, Bulgaria
[4] Bulgarian Acad Sci, Cent Lab Appl Phys, 61 Sankt Petersburg Blvd, Plovdiv 4000, Bulgaria
来源：
13TH INTERNATIONAL CONFERENCE ON TRIBOLOGY (ROTRIB'16) | 2017年 / 174卷
关键词：
D O I：
10.1088/1757-899X/174/1/012064
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Injection molds used in production of plastic components are subject of heavy abrasion wear. The increase of their wear resistance significantly reduces the production cost. In the current work are presented research results of the wear resistance of injection molds made of steel 1.2343, coated with Ti/TiN/TiCN/nc-TiCN:a-C/nc-TiC:a-C/a-C. The study of the wear rate was done using the volumetric method and the influence of the trace length was investigated. The coating thickness, nanohardness, elastic modulus and adhesion were also tested. The coating was applied on unhardened ground specimens, hardened ground specimens and hardened polished specimens.
引用
收藏
页数：8
相关论文
共 50 条
  • [1] On the composition analysis of nc-TiC/a-C:H nanocomposite coatings
    Chechenin, N. G.
    Chernykh, P. N.
    Kulikauskas, V. S.
    Pei, Y. T.
    Vainshtein, D.
    De Hosson, J. Th M.
    JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2008, 41 (08)
  • [2] Microstructure and tribological properties of magnetron sputtered nc-TiC/a-C nanocomposite
    Zhang, S
    Bui, XL
    Jiang, J
    Li, XM
    SURFACE & COATINGS TECHNOLOGY, 2005, 198 (1-3): : 206 - 211
  • [3] Nanocomposite nc-TiC/a-C thin films for electrical contact applications
    Lewin, Erik
    Wilhelmsson, Ola
    Jansson, Ulf
    Journal of Applied Physics, 2006, 100 (05):
  • [4] The preparation and tribological properties of nc-TiC/a-C nanocomposite multilayer films
    Laboratory of Special Functional Materials, Henan University, Kaifeng
    475000, China
    不详
    475000, China
    Mocaxue Xuebao, 2 (190-197):
  • [5] Nanocomposite nc-TiC/a-C thin films for electrical contact applications
    Lewin, Erik
    Wilhelmsson, Ola
    Jansson, Ulf
    JOURNAL OF APPLIED PHYSICS, 2006, 100 (05)
  • [6] Compositional, structural and mechanical characteristics of nc-TiC/a-C:H nanocomposite films
    Wang, Yaohui
    Zhang, Xu
    Wu, Xianying
    Zhang, Huixing
    Zhang, Xiaoji
    APPLIED SURFACE SCIENCE, 2008, 255 (05) : 1801 - 1805
  • [7] Magnetron-sputtered nc-TiC/a-C(Al) tough nanocomposite coatings
    Zhang, S
    Bui, XL
    Fu, YQ
    THIN SOLID FILMS, 2004, 467 (1-2) : 261 - 266
  • [8] Industrialisation Study of Nanocomposite nc-TiC/a-C Coatings for Electrical Contact Applications
    Lewin, Erik
    Olsson, Erik
    Andre, Benny
    Joelsson, Torbjorn
    Oberg, Ake
    Wiklund, Urban
    Ljungcrantz, Henrik
    Jansson, Ulf
    PLASMA PROCESSES AND POLYMERS, 2009, 6 : S928 - S934
  • [9] Nanocomposite nc-Tic/a-C:H films fabricated by dual plasma technique
    Wang, Yaohui
    Zhang, Xu
    Xu, Yuanzhi
    Wu, Xianying
    Zhang, Huixing
    Zhang, Xiaoji
    SURFACE REVIEW AND LETTERS, 2007, 14 (05) : 891 - 897
  • [10] Superhard nanocomposite nc-TiC/a-C:H coatings: The effect of HiPIMS on coating microstructure and mechanical properties
    Soucek, Pavel
    Daniel, Josef
    Hnilica, Jaroslav
    Bernatova, Katarina
    Zabransky, Lukas
    Bursikova, Vilma
    Stupayska, Monika
    Vasina, Petr
    SURFACE & COATINGS TECHNOLOGY, 2017, 311 : 257 - 267
12345