CHF on Anodized Zirconium-based Alloy Surfaces with Protective Oxide Layers for ATF cladding

被引：6
|
作者：
Kam, Dong Hoon [1 ,2 ]
Yu, Hyoung Suk [2 ]
Jeong, Yong Hoon [2 ]
Park, Yang Jeong [2 ]
Kim, Jung Woo [2 ]
Cho, Sung Oh [2 ]
机构：
[1] Korea Atom Energy Res Inst KAERI, 989-111 Daedeokdaero, Daejeon 34057, South Korea
[2] Korea Adv Inst Sci & Technol KAIST, Dept Nucl & Quantum Engn, 291 Daehak Ro, Daejeon 305701, South Korea
来源：
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER | 2021年 / 170卷
关键词：
D O I：
10.1016/j.ijheatmasstransfer.2021.120936
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
An anodization method is considered for the accident-tolerant fuel cladding in nuclear power plants. A new approach is used to form stable/intact nanostructures on the conventional Zr-based cladding surface to protect the surface against active oxidation under high-temperature steam conditions. CHF experiments have been performed to consider the anodizing time, boric acid concentration and irradiation effects. After certain periods, the CHF values become saturated, and the boric acid-added coolant shows noticeable effects on the non-anodized surface. The irradiated surfaces become hydrophobic but still showed better CHF results than the non-anodized surfaces. (C) 2021 Published by Elsevier Ltd.
引用
收藏
页数：11
相关论文
共 50 条
  • [41] Hydrogen absorption studies of an over-stoichiometric zirconium-based AB2 alloy
    Triaca, WE
    Peretti, HA
    Corso, HL
    Bonesi, A
    Visintin, A
    JOURNAL OF POWER SOURCES, 2003, 113 (01) : 151 - 156
  • [42] Corrosion properties of AZ31 magnesium alloy and protective effects of chemical conversion layers and anodized coatings
    程英亮
    吴海兰
    陈振华
    王慧敏
    张昭
    吴有伍
    TransactionsofNonferrousMetalsSocietyofChina, 2007, (03) : 502 - 508
  • [43] Evolution of Shear Bands in the Structure of a Zirconium-Based Amorphous Alloy during Rolling at Different Temperatures
    A. G. Igrevskaya
    A. I. Bazlov
    Physics of Metals and Metallography, 2021, 122 : 121 - 126
  • [44] Evolution of Shear Bands in the Structure of a Zirconium-Based Amorphous Alloy during Rolling at Different Temperatures
    Igrevskaya, A. G.
    Bazlov, A. I.
    PHYSICS OF METALS AND METALLOGRAPHY, 2021, 122 (02): : 121 - 126
  • [45] The formation and corrosion behavior of a zirconium-based conversion coating on the aluminum alloy AA6061
    Dongdong Peng
    Junsheng Wu
    Xiaoli Yan
    Xiaoqiong Du
    Yueying Yan
    Xiaogang Li
    Journal of Coatings Technology and Research, 2016, 13 : 837 - 850
  • [46] PROTECTIVE VACUUM-ARC COATINGS ON ZIRCONIUM ALLOY FUEL CLADDING TO PREVENT CATASTROPHIC ACCIDENTS AT NUCLEAR REACTORS
    Kuprin, A. S.
    Zuyok, V. A.
    Belous, V. A.
    Ovcharenko, V. D.
    Reshetnyak, E. N.
    Vasilenko, R. L.
    Tolmachova, G. N.
    Kushtym, Ya. O.
    PROBLEMS OF ATOMIC SCIENCE AND TECHNOLOGY, 2023, (02): : 94 - 104
  • [47] New insight into crack formation during corrosion of zirconium-based metal-oxide systems
    Vermaak, Natasha
    Parry, Guillaume
    Estevez, Rafael
    Brechet, Yves
    ACTA MATERIALIA, 2013, 61 (12) : 4374 - 4383
  • [48] Short communication on "self-crack-healing behavior of oxide formed on a zirconium alloy cladding tube"
    Lee, Cheol Min
    Kim, Gyeonghun
    Sohn, Dong-Seong
    Han, Young-Soo
    Mok, Yong-Kyoon
    JOURNAL OF NUCLEAR MATERIALS, 2019, 526
  • [49] Modeling of zirconium alloy cladding corrosion behavior based on neural ordinary differential equation
    Zhang, Tao
    Jiao, Yongjun
    Liu, Zhenhai
    Xing, Shuo
    Wang, Haoyu
    Zhang, Kun
    Li, Yuanming
    NUCLEAR ENGINEERING AND TECHNOLOGY, 2025, 57 (03)
  • [50] RULES OF FORMATION OF PROTECTIVE OXIDE LAYERS IN METAL (ALLOY)-MEDIUM SYSTEMS.
    Akimov, A.G.
    1600, (22):
12345