CHF on Anodized Zirconium-based Alloy Surfaces with Protective Oxide Layers for ATF cladding

被引：6

作者：

Kam, Dong Hoon ^{[1
,2
]}

Yu, Hyoung Suk ^{[2
]}

Jeong, Yong Hoon ^{[2
]}

Park, Yang Jeong ^{[2
]}

Kim, Jung Woo ^{[2
]}

Cho, Sung Oh ^{[2
]}

机构：

[1] Korea Atom Energy Res Inst KAERI, 989-111 Daedeokdaero, Daejeon 34057, South Korea

[2] Korea Adv Inst Sci & Technol KAIST, Dept Nucl & Quantum Engn, 291 Daehak Ro, Daejeon 305701, South Korea

来源：

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER | 2021年 / 170卷

关键词：

D O I：

10.1016/j.ijheatmasstransfer.2021.120936

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

An anodization method is considered for the accident-tolerant fuel cladding in nuclear power plants. A new approach is used to form stable/intact nanostructures on the conventional Zr-based cladding surface to protect the surface against active oxidation under high-temperature steam conditions. CHF experiments have been performed to consider the anodizing time, boric acid concentration and irradiation effects. After certain periods, the CHF values become saturated, and the boric acid-added coolant shows noticeable effects on the non-anodized surface. The irradiated surfaces become hydrophobic but still showed better CHF results than the non-anodized surfaces. (C) 2021 Published by Elsevier Ltd.

引用

页数：11

共 50 条

[21] SIMS investigation of the processes of gas release from zirconium-based getter alloy
Litvinov V.A.
Koppe V.T.
Shevchenko D.I.
Okseniuk I.I.
Bobkov V.V.
Bulletin of the Russian Academy of Sciences: Physics, 1600, Allerton Press Incorporation (78): : 526 - 530
[22] Nanostructured Zirconium-Oxide Bioceramic Coatings Derived from the Anodized Al/Zr Metal Layers
Fohlerova, Zdenka
Kamnev, Kirill
Sepulveda, Marcela
Pytlicek, Zdenek
Prasek, Jan
Mozalev, Alexander
ADVANCED MATERIALS INTERFACES, 2021, 8 (14)
[23] Comparison of two kinetic approaches for modeling of radial hydride fraction in zirconium-based fuel rod cladding
Kolesnik, Mikhail
NUCLEAR ENGINEERING AND TECHNOLOGY, 2025, 57 (07)
[24] A STUDY OF THE INTERPHASE STRUCTURE AT THE OXIDE METAL INTERFACE IN THE CORROSION OF ZIRCONIUM-BASED ALLOYS
DING, YQ
NORTHWOOD, DO
CORROSION SCIENCE, 1994, 36 (02) : 259 - 282
[25] Experimental Study on Saturated Pool Boiling Bubble Behavior of ATF Chromium Coated Zirconium Alloy Cladding at Atmospheric Pressure
Wen Q.
Zeng X.
Du Q.
Chen Z.
Zhang R.
Du P.
Hedongli Gongcheng/Nuclear Power Engineering, 2022, 43 (05): : 34 - 42
[26] Application of Coating Technology on Zirconium-Based Alloy to Decrease High-Temperature Oxidation
Kim, Hyun-Gil
Kim, Il-Hyun
Park, Jeong-Yong
Koo, Yang-Hyun
ZIRCONIUM IN THE NUCLEAR INDUSTRY, 2015, 1543 : 346 - 369
[27] Shock-wave induced tension and spall in a zirconium-based bulk amorphous alloy
Turneaure, Stefan J.
Dwivedi, S. K.
Gupta, Y. M.
JOURNAL OF APPLIED PHYSICS, 2007, 101 (04)
[28] Study on crystallization behavior in zirconium-based bulk amorphous alloy after cobalt implantation
Tao, Pingjun
Yang, Yuanzheng
Chen, Xin
Wang, Changming
Gao, Jian
MATERIALS LETTERS, 2014, 121 : 177 - 180
[29] Production of zirconium-based glassy alloy wires by melt extraction method and their mechanical properties
Katsuya, A
Inoue, A
BULK METALLIC GLASSES, 1999, 554 : 107 - 111
[30] Structure evolution of a zirconium-based amorphous alloy upon megaplastic strain in the bridgeman chamber
A. M. Glezer
R. V. Sundeev
A. V. Shalimova
S. S. Useinov
Russian Physics Journal, 2012, 54 : 898 - 905

← 1 2 3 4 5 →