SURFACE ROUGHNESS EFFECT ON THE 3D PRINTED BUTT JOINTS STRENGTH

被引:5
|
作者
Kovan, V. [1 ]
Altan, G. [2 ]
Topal, E. S. [1 ]
Camurlu, H. E. [1 ]
机构
[1] Akdeniz Univ, Dept Mech Engn, Antalya, Turkey
[2] Pamukkale Univ, Dept Mech Engn, Denizli, Turkey
关键词
3D printing; surface roughness; pla; bonding strength;
D O I
10.15544/balttrib.2015.21
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Three-dimensional printing or 3D printing (also called additive manufacturing) is any of various processes used to make a three-dimensional object. Fused deposition modelling (FDM) is an additive manufacturing technology commonly used for modelling, prototyping, and production applications. It is one of the techniques used for 3D printing. FDM is somewhat restricted in the size and the variation of shapes that may be fabricated. For parts too large to fit on a single build, for faster job builds with less support material, or for parts with finer features, sectioning and bonding FDM parts is a great solution. The strength of adhesive bonded FDM parts is affected by the surface roughness. In this study, the layer thickness effect on bonding strength is experimentally studied and the results are discussed.
引用
收藏
页码:117 / 121
页数:5
相关论文
共 50 条
  • [31] Roughness and compressive strength of FDM 3D printed specimens affected by acetone vapour treatment
    Beniak, Juraj
    Krizan, Peter
    Soos, Lubomir
    Matus, Milos
    [J]. 8TH TSME-INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING (TSME-ICOME 2017), 2018, 297
  • [32] Numerical Simulation of Forced Convection in a Microchannel with Realistic Roughness of 3D Printed Surface
    Manavi, Seyed Alborz
    Kenig, Eugeny Y.
    [J]. 29TH EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING, PT A, 2019, 46 : 823 - 828
  • [33] Evaluation of mathematical models for surface roughness prediction of PolyJet 3D printed parts
    Pandey, Praneet
    Nayak, Ankit
    Taufik, Mohammad
    [J]. ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2024, 10 (01) : 89 - 98
  • [34] Surface roughness of 3D printed materials: Comparing physical measurements and human perception
    Hartcher-O'Brien, Jess
    Evers, Jeremy
    Tempelman, Erik
    [J]. MATERIALS TODAY COMMUNICATIONS, 2019, 19 : 300 - 305
  • [35] Microstructural properties and surface roughness of 3D printed open cell-foam
    Anuar, Fadhilah Shikh
    Mustapha, Khairul Azhar
    Sa'at, Fatimah Al-Zahrah Mohd
    Zini, Nurul Hilwa Mohd
    Tokit, Ernie Mat
    Narasimmanaidu, Satishwara Rao
    Hooman, Kamel
    [J]. JURNAL TRIBOLOGI, 2023, 36 : 16 - 31
  • [36] Effect of processing parameters on tensile strength of 3D printed parts
    Fajic, A.
    Tufekcic, Dz.
    Topcic, A.
    [J]. MECHANIKA 2008, PROCEEDINGS, 2008, : 123 - 128
  • [37] Dynamic characterization of 3D printed bolted joints
    Ranjan, Prabhat
    Sibivivek, K. P.
    Pandey, Ashok Kumar
    [J]. TRIBOLOGY INTERNATIONAL, 2023, 187
  • [38] BOND STRENGTH OF 3D PRINTED CONCRETE
    Tay, Yi Wei Daniel
    Ting, Guan Heng Andrew
    Panda, Biranchi
    He, Lewei
    Tan, Ming Jen
    [J]. PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON PROGRESS IN ADDITIVE MANUFACTURING, 2018, : 25 - 30
  • [40] Strength of Ductile Adhesive Butt Joint Bonded with Dissimilar Adherents: Effect of Surface Roughness
    Atikah, N.
    Afendi, M.
    Hirmaliza, S.
    Majid, M. S. Abdul
    Amira, N.
    Mazlee, M. N.
    [J]. MECHANICAL AND MATERIALS ENGINEERING, 2014, 554 : 366 - +