Influence of reactive ion etching damage on the Schottky barrier height of Ti/p-Si interface

被引：1
|
作者：
Fujimura, N
Yamaguchi, T
Kato, H
Ito, T
机构：
[1] Univ Osaka Prefecture, Coll Engn, Dept Appl Mat Sci, Sakai, Osaka 5998531, Japan
[2] Matsushita Elect Corp, Semicond Co, ULSI Proc Technol Dev Ctr, Kyoto 6018413, Japan
来源：
APPLIED SURFACE SCIENCE | 2000年 / 159卷
关键词：
reactive ion etching; plasma-induced damage; Schottky barrier height; Ti/Si interface;
D O I：
10.1016/S0169-4332(00)00069-6
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
Change in Schottky barrier height (SBH) of Ti/Si surface damaged by CHF3/O-2 plasma treatment was investigated as a function of annealing temperature. SBH of the damaged interface was initially higher than that of clean interface. The SBH of damaged interface increased with increasing the annealing temperature up to 400 degrees C, while SBH of the samples without damage did not change. It was found that the increase in SBH was due to the formation of Ti5Si3 under the influence of the plasma-induced damage. At the annealing temperature of 600 degrees C, the SBH values of damaged and undamaged interfaces became almost identical due to C49 TiSi2 formation. (C) 2000 Published by Elsevier Science B.V.
引用
收藏
页码：186 / 190
页数：5
相关论文
共 50 条
  • [1] ON THE BARRIER HEIGHT OF AL/P-SI SCHOTTKY DIODES
    IOANNOU, DE
    HUANG, YJ
    MCLARTY, PK
    JOHNSON, SM
    PHYSICA STATUS SOLIDI A-APPLIED RESEARCH, 1986, 93 (02): : K223 - K226
  • [2] The barrier-height inhomogeneity in identically prepared H-terminated Ti/p-Si Schottky barrier diodes
    Cetin, H
    Sahin, B
    Ayyildiz, E
    Türüt, A
    SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 2004, 19 (09) : 1113 - 1116
  • [3] The modification of Schottky barrier height of Au/p-Si Schottky devices by perylene-diimide
    Department of Physics, Faculty of Science, Selçuk University Campus, Konya 42075, Turkey
    不详
    不详
    不详
    Yüksel, Ö.F., 1600, American Institute of Physics Inc. (113):
  • [4] The modification of Schottky barrier height of Au/p-Si Schottky devices by perylene-diimide
    Yuksel, O. F.
    Tugluoglu, N.
    Safak, H.
    Kus, M.
    JOURNAL OF APPLIED PHYSICS, 2013, 113 (04)
  • [5] The barrier height inhornogeneity in Al/p-Si Schottky barrier diodes with native insulator layer
    Dokme, Ilbilge
    Altindal, Semsettin
    Bulbul, M. Mahir
    APPLIED SURFACE SCIENCE, 2006, 252 (22) : 7749 - 7754
  • [6] Gaussian distribution of inhomogeneous barrier height in Ag/p-Si (100) Schottky barrier diodes
    Acar, S
    Karadeniz, S
    Tugluoglu, N
    Selçuk, AB
    Kasap, M
    APPLIED SURFACE SCIENCE, 2004, 233 (1-4) : 373 - 381
  • [7] Ultrahigh Al Schottky barrier to p-Si
    Horváth, ZJ
    Adám, M
    Van Tuyen, V
    Dücso, C
    ASDAM'98, SECOND INTERNATIONAL CONFERENCE ON ADVANCED SEMICONDUCTOR DEVICES AND MICROSYSTEMS, CONFERENCE PROCEEDINGS, 1998, : 83 - 86
  • [8] Impact of plasma etching on the noise performance of Ti/p-Si and Ti/p-Si1-xGex Schottky contacts
    Ouacha, H
    Mamor, M
    Willander, M
    Ouacha, A
    Auret, FD
    JOURNAL OF APPLIED PHYSICS, 2000, 87 (08) : 3858 - 3863
  • [9] The influence of silicide formation on the barrier height of Ti/Si MIS Schottky barriers
    De Bosscher, W
    Van Meirhaeghe, RL
    Hanselaer, PL
    Caenepeel, L
    Laflere, WH
    Cardon, F
    SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 1986, 1 (06) : 376 - 382
  • [10] Temperature dependence of current-voltage of Al/p-Si(100) and Ti/p-Si(100) Schottky barrier diodes
    Vazquez, Arely
    Molina, Joel
    2022 IEEE LATIN AMERICAN ELECTRON DEVICES CONFERENCE (LAEDC), 2022,
12345