Effects of tool geometrical parameters on the chip formation and cutting force in orthogonal cutting

被引：3

作者：

Fang, G ^{[1
]}

Zeng, P ^{[1
]}

机构：

[1] Tsing Hua Univ, Dept Engn Mech, Beijing 100084, Peoples R China

来源：

ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY | 2004年 / 471-472卷

关键词：

orthogonal cutting; finite element method; tool; chip formation;

D O I：

10.4028/www.scientific.net/MSF.471-472.16

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The tool plays an important role in cutting process. The aim of this paper is to investigate the effect of tool geometrical parameters on the chip formation and cutting force with orthogonal cutting models. The large deformation Rigid-visco-plastic FEM program DEFORM-2D(TM) is used, and thermo-mechanical coupling effect are considered. The chip separation from workpiece is implemented by remeshing. Contrary to traditional cutting simulation, the workpiece is moved and the tool is fixed, which is consistent with actual process. The effects of tool rake angle on the chip geometry and cutting force are analyzed. The simulated cutting forces are compared with results in other references. The research results are a help to cutting process study and cutting tool design.

引用

页码：16 / 20

页数：5

共 50 条

[41] Integrated Monitoring of Surface Roughness and Chip Formation by Utilizing Cutting Force and Cutting Temperature
Tangjitsitcharoen, Somkiat
Ratanakuakangwan, Suthas
MATERIALS PROCESSING TECHNOLOGY II, PTS 1-4, 2012, 538-541 : 1338 - 1350
[42] The effect of material parameters on chip formation in orthogonal cutting simulation of Ti-5553 Alloy
Ozkutuk, Melih
Kaynak, Yusuf
16TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (16TH CIRP CMMO), 2017, 58 : 305 - 310
[43] The Characteristics of Titanium Alloy Chip-Breaking by Orthogonal Cutting with a Surface-Textured Cutting Tool
Zhang Jianfu
Chen Zhimeng
Feng Pingfa
Xu Wanhong
MACHINE DESIGN AND MANUFACTURING ENGINEERING II, PTS 1 AND 2, 2013, 365-366 : 1235 - +
[44] FLOW ALONG TOOL-CHIP INTERFACE IN ORTHOGONAL METAL CUTTING
ENAHORO, HE
OXLEY, PLB
JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 1966, 8 (01): : 36 - &
[45] FINITE ELEMENT STUDY ON CHIP FORMATION AND FORCE RESPONSE IN TWO-DIMENSIONAL ORTHOGONAL CUTTING OF ROCK
Che, Demeng
Han, Peidong
Peng, Bo
Ehmann, Kornel F.
PROCEEDINGS OF THE ASME 9TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2014, VOL 2, 2014,
[46] Transient Temperature at Tool-Chip Interface during Initial Period of Chip Formation in Orthogonal Cutting of Inconel 718
Alammari, Youssef
Weng, Jian
Saelzer, Jannis
Biermann, Dirk
MATERIALS, 2024, 17 (10)
[47] Effects of moderation in adhesive force between tool and chip with surface micro textures on reduction in cutting force
Seimitsu Kogaku Kaishi, 5 (452-458):
[48] PVD AlTiN coating effects on tool-chip heat partition coefficient and cutting temperature rise in orthogonal cutting Inconel 718
Zhao, Jinfu
Liu, Zhanqiang
Wang, Bing
Hu, Jianrui
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2020, 163 (163)
[49] Modeling and analysis of the chip formation and transient cutting force during elliptical vibration cutting process
Lin, Jieqiong
Guan, Liang
Lu, Mingming
Han, Jinguo
Kan, Yudi
AIP ADVANCES, 2017, 7 (12):
[50] ANALYTICAL PREDICTION OF 3 DIMENSIONAL CUTTING PROCESS .2. CHIP FORMATION AND CUTTING FORCE WITH CONVENTIONAL SINGLE-POINT TOOL
USUI, E
HIROTA, A
JOURNAL OF ENGINEERING FOR INDUSTRY-TRANSACTIONS OF THE ASME, 1978, 100 (02): : 229 - 235

← 1 2 3 4 5 →