Effects of tool geometrical parameters on the chip formation and cutting force in orthogonal cutting

被引：3
|
作者：
Fang, G [1 ]
Zeng, P [1 ]
机构：
[1] Tsing Hua Univ, Dept Engn Mech, Beijing 100084, Peoples R China
来源：
ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY | 2004年 / 471-472卷
关键词：
orthogonal cutting; finite element method; tool; chip formation;
D O I：
10.4028/www.scientific.net/MSF.471-472.16
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The tool plays an important role in cutting process. The aim of this paper is to investigate the effect of tool geometrical parameters on the chip formation and cutting force with orthogonal cutting models. The large deformation Rigid-visco-plastic FEM program DEFORM-2D(TM) is used, and thermo-mechanical coupling effect are considered. The chip separation from workpiece is implemented by remeshing. Contrary to traditional cutting simulation, the workpiece is moved and the tool is fixed, which is consistent with actual process. The effects of tool rake angle on the chip geometry and cutting force are analyzed. The simulated cutting forces are compared with results in other references. The research results are a help to cutting process study and cutting tool design.
引用
收藏
页码：16 / 20
页数：5
相关论文
共 50 条
  • [11] Main Cutting Force and Cutting Temperature Affected by the Tool Rake Angle Based on Orthogonal Cutting Model
    Wang Lingyun
    Huang Honghui
    Zhang Mengmeng
    Wang Dan
    MECHANICAL, CONTROL, ELECTRIC, MECHATRONICS, INFORMATION AND COMPUTER, 2016, : 167 - 174
  • [12] The relationships between cutting parameters, tool wear, cutting force and vibration
    Xu Chuangwen
    Dou Jianming
    Chai Yuzhen
    Li Huaiyuan
    Shi Zhicheng
    Xu Jing
    ADVANCES IN MECHANICAL ENGINEERING, 2018, 10 (01):
  • [13] Investigation of Chip Formation Characteristics in Orthogonal Cutting of Graphite
    Zhou, L.
    Wang, C. Y.
    Qin, Z.
    MATERIALS AND MANUFACTURING PROCESSES, 2009, 24 (12) : 1365 - 1372
  • [14] Experimental investigation of dynamic chip formation in orthogonal cutting
    Molnar, Tamas G.
    Berezvai, Szabolcs
    Kiss, Adam K.
    Bachrathy, Daniel
    Stepan, Gabor
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2019, 145
  • [15] FEM simulation of orthogonal cutting: serrated chip formation
    Ceretti, E
    Lucchi, M
    Altan, T
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1999, 95 (1-3) : 17 - 26
  • [16] CHIP FORMATION IN FREE NON-ORTHOGONAL CUTTING
    BOBROV, VF
    SOVIET ENGINEERING RESEARCH, 1982, 2 (02): : 57 - 58
  • [17] Influence of heat treatment and cutting parameters on chip formation and cutting forces
    Schulz, H
    Sahm, A
    METAL CUTTING AND HIGH SPEED MACHINING, 2002, : 69 - 78
  • [18] Effects of tool structure factor, cutting orientations, and cutting parameters of double-arc milling cutter on cutting force
    Fan, Mengchao
    Bi, Chunxu
    Liu, Xianli
    Yue, Caixu
    Hu, Desheng
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 134 (9-10): : 4701 - 4716
  • [19] Effect of uncut chip thickness on the ploughing force in orthogonal cutting
    Popov, Alexey
    Dugin, Andrey
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 76 (9-12): : 1937 - 1945
  • [20] Effect of uncut chip thickness on the ploughing force in orthogonal cutting
    Alexey Popov
    Andrey Dugin
    The International Journal of Advanced Manufacturing Technology, 2015, 76 : 1937 - 1945
12345