Effects of tool geometrical parameters on the chip formation and cutting force in orthogonal cutting

被引：3
|
作者：
Fang, G [1 ]
Zeng, P [1 ]
机构：
[1] Tsing Hua Univ, Dept Engn Mech, Beijing 100084, Peoples R China
来源：
ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY | 2004年 / 471-472卷
关键词：
orthogonal cutting; finite element method; tool; chip formation;
D O I：
10.4028/www.scientific.net/MSF.471-472.16
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The tool plays an important role in cutting process. The aim of this paper is to investigate the effect of tool geometrical parameters on the chip formation and cutting force with orthogonal cutting models. The large deformation Rigid-visco-plastic FEM program DEFORM-2D(TM) is used, and thermo-mechanical coupling effect are considered. The chip separation from workpiece is implemented by remeshing. Contrary to traditional cutting simulation, the workpiece is moved and the tool is fixed, which is consistent with actual process. The effects of tool rake angle on the chip geometry and cutting force are analyzed. The simulated cutting forces are compared with results in other references. The research results are a help to cutting process study and cutting tool design.
引用
收藏
页码：16 / 20
页数：5
相关论文
共 50 条
  • [1] Effect of cutting parameters on the chip formation in orthogonal cutting
    M'hamdi, M.
    BenSalem, S.
    Boujelbene, M.
    Katundi, D.
    Bayraktar, E.
    INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, PTS ONE AND TWO, 2010, 1315 : 1101 - +
  • [2] Investigation of chip formation, cutting force and surface roughness during orthogonal cutting of polytetrafluoroethylene
    Cui, Zhi
    Ni, Jing
    He, Lihua
    Guan, Liming
    Han, Lidong
    Sun, Jingbo
    JOURNAL OF MANUFACTURING PROCESSES, 2022, 77 : 485 - 494
  • [3] Research on the Effect of Cutting Parameters on Chip Formation and Cutting Force in Elliptical Vibration Cutting Process
    Lin, Jieqiong
    Guan, Liang
    Lu, Mingming
    Han, Jinguo
    Feng, Da
    1ST INTERNATIONAL CONFERENCE ON FRONTIERS OF MATERIALS SYNTHESIS AND PROCESSING (FMSP 2017), 2017, 274
  • [4] Effects of cutting parameters on tool temperatures in intermittent turning with the formation of serrated chip considered
    Cui, Xiaobin
    Guo, Jingxia
    APPLIED THERMAL ENGINEERING, 2017, 110 : 1220 - 1229
  • [5] MECHANICS OF CONTINUOUS CHIP FORMATION IN ORTHOGONAL CUTTING
    CONNOLLY, R
    RUBENSTE.C
    INTERNATIONAL JOURNAL OF MACHINE TOOL DESIGN AND RESEARCH, 1968, 8 (03): : 159 - &
  • [6] On chip formation mechanism in orthogonal cutting of bone
    Liao, Zhirong
    Axinte, Dragos A.
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2016, 102 : 41 - 55
  • [7] Chip formation in orthogonal cutting of hardened steel
    Nakano, T
    Matsuo, T
    PROGRESS OF MACHINING TECHNOLOGY: WITH SOME TOPICS IN ADVANCED MANUFACTURING TECHNOLOGY, 2002, : 766 - 771
  • [8] Cutting forces and chip formation revisited based on orthogonal cutting of Scots pine
    Zhu, Zhaolong
    Buck, Dietrich
    Ekevad, Mats
    Marklund, Birger
    Guo, Xiaolei
    Cao, Pingxiang
    Zhu, Nanfeng
    HOLZFORSCHUNG, 2019, 73 (02) : 131 - 138
  • [9] A parametric study of the effects of cutting parameters on chip formation process
    Movahhedy, MR
    Gadala, MS
    Altintas, Y
    METAL CUTTING AND HIGH SPEED MACHINING, 2002, : 91 - 105
  • [10] Contact variables and thermal effects at the tool-chip interface in orthogonal cutting
    Molinari, A.
    Cheriguene, R.
    Miguelez, H.
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2012, 49 (26) : 3774 - 3796
12345