Effect of Adding CNT on Dissimilar Welding of Aluminium Alloys by FSW

被引：2
|
作者：
Rabiezadeh, Amin [1 ]
Arghavani, Farhad [2 ]
Mokhtari, Masoud [2 ]
机构：
[1] Islamic Azad Univ, Dept Mat Engn, Shiraz Branch, POB 7178774731, Shiraz, Iran
[2] Islamic Azad Univ, Shiraz Branch, Dept Mech Engn, Shiraz, Iran
来源：
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS | 2021年 / 74卷 / 08期
关键词：
Dissimilar welding; Al alloy; CNT; Friction stir welding; Wear test; MECHANICAL-PROPERTIES; CORROSION BEHAVIOR; PROCESS PARAMETERS; HEAT-TREATMENT; MG ALLOY; FRICTION; MICROSTRUCTURE; JOINTS; FABRICATION; COMPOSITE;
D O I：
10.1007/s12666-021-02292-9
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The main purpose of this study was to evaluate the effect of adding CNT on the properties of dissimilar friction stir welded aluminum alloys. For this purpose, a tool with threaded tapered cylindrical pin was designed and manufactured from H13 hot working steel. Reliability of the joints was assessed by non-destructive tests such as visual inspection, ultrasonic and radiography. Tensile joint efficiency of successful dissimilar welds was more than 100% for 4 mm/min tool transverse speed and 2000 rpm tool rotational rate. Electron microscopy evaluation of fractured surfaces indicated that the dominant failure mechanism was ductile fracture. Addition of CNT into the joint area during welding led to hardness and wear resistance increment while reduced the ductility of welding samples. The friction coefficient in the two-passes welded sample was about 30% lower than the friction coefficient of the base metal.
引用
收藏
页码：1883 / 1894
页数：12
相关论文
共 50 条
  • [21] An experimental study and parameter optimization of FSW for welding dissimilar 6061 and 7075 Al alloys
    Kumar, G. S. V. Seshu
    Kumar, Anshuman
    Rajesh, S.
    Chekuri, Rama Bhadri Raju
    Ramakotaiah, K.
    INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2023, 17 (01): : 215 - 223
  • [22] Effect of hybrid reinforcement at stirred zone of dissimilar aluminium alloys during friction stir welding
    Kumar, R. Ashok
    Raghav, G. R.
    Nagarajan, K. J.
    Rengarajan, Sathish
    Suganthi, P.
    Vignesh, V.
    METALLURGICAL RESEARCH & TECHNOLOGY, 2019, 116 (06)
  • [23] Controlling Interfacial Reaction During Dissimilar Metal Welding of Aluminium Alloys
    Wang, Li
    Wang, Yin
    Zhang, Chaoqun
    Xu, Lei
    Robson, Joseph
    Prangnell, Philip
    Aluminium Alloys 2014 - ICAA14, 2014, 794-796 : 416 - 421
  • [24] Microstructure and mechanical properties in dissimilar friction stir welding of aluminium alloys
    Selamat, Nor Fazilah Mohamad
    Sajuri, Zainuddin
    Baghdadi, Amir Hossein
    Kokabi, Amir Hossein
    PROCEEDINGS OF INTERNATIONAL CONFERENCE ON ADVANCED PROCESSES AND SYSTEMS IN MANUFACTURING (APSIM 2016), 2016, : 47 - 48
  • [25] Investigate the Process Parameter on the Friction Stir Welding of Dissimilar Aluminium Alloys
    Raja, R.
    Parthiban, A.
    Nandha Gopan, S.
    Degefa, Derese
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2022, 2022
  • [26] FRICTION STIR WELDING OF T-JOINTS IN DISSIMILAR ALUMINIUM ALLOYS
    Tavares, S. M. O.
    Azevedo, P. C. M.
    Emilio, B.
    Richter-Trummer, V.
    Figueiredo, M. A. V.
    Vilaca, P.
    de Castro, P. M. S. T.
    IMECE2008: PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, VOL 4: DESIGN AND MANUFACTURING, 2009, : 265 - 273
  • [27] Laser braze welding for dissimilar metal joining of aluminium alloys to steel
    Matsumoto, Tsuyoshi
    Sasabe, Seiji
    Welding International, 2012, 26 (04) : 270 - 274
  • [28] Numerical simulation of Friction Stir Welding of three dissimilar aluminium alloys
    Bosneag, A.
    Constantin, M. A.
    Nitu, E. L.
    INNOVATIVE MANUFACTURING ENGINEERING AND ENERGY (IMANEE 2019) - 50 YEARS OF HIGHER TECHNICAL EDUCATION AT THE UNIVERSITY OF PITESTI, 2019, 564
  • [29] Friction stir welding of similar and dissimilar aluminium alloys for automotive applications
    Selamat, N. F. M.
    Baghdadi, A. H.
    Sajuri, Z.
    Kokabi, A. H.
    INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING, 2016, 13 (02) : 3401 - 3412
  • [30] Research Progress in Dissimilar Friction Stir Welding of Aluminium/Magnesium Alloys
    Wu C.
    Lü X.
    Su H.
    Shi L.
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2020, 56 (06): : 4 - 16
12345