Effect of Adding CNT on Dissimilar Welding of Aluminium Alloys by FSW

被引：2
|
作者：
Rabiezadeh, Amin [1 ]
Arghavani, Farhad [2 ]
Mokhtari, Masoud [2 ]
机构：
[1] Islamic Azad Univ, Dept Mat Engn, Shiraz Branch, POB 7178774731, Shiraz, Iran
[2] Islamic Azad Univ, Shiraz Branch, Dept Mech Engn, Shiraz, Iran
来源：
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS | 2021年 / 74卷 / 08期
关键词：
Dissimilar welding; Al alloy; CNT; Friction stir welding; Wear test; MECHANICAL-PROPERTIES; CORROSION BEHAVIOR; PROCESS PARAMETERS; HEAT-TREATMENT; MG ALLOY; FRICTION; MICROSTRUCTURE; JOINTS; FABRICATION; COMPOSITE;
D O I：
10.1007/s12666-021-02292-9
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The main purpose of this study was to evaluate the effect of adding CNT on the properties of dissimilar friction stir welded aluminum alloys. For this purpose, a tool with threaded tapered cylindrical pin was designed and manufactured from H13 hot working steel. Reliability of the joints was assessed by non-destructive tests such as visual inspection, ultrasonic and radiography. Tensile joint efficiency of successful dissimilar welds was more than 100% for 4 mm/min tool transverse speed and 2000 rpm tool rotational rate. Electron microscopy evaluation of fractured surfaces indicated that the dominant failure mechanism was ductile fracture. Addition of CNT into the joint area during welding led to hardness and wear resistance increment while reduced the ductility of welding samples. The friction coefficient in the two-passes welded sample was about 30% lower than the friction coefficient of the base metal.
引用
收藏
页码：1883 / 1894
页数：12
相关论文
共 50 条
  • [1] Effect of Adding CNT on Dissimilar Welding of Aluminium Alloys by FSW
    Amin Rabiezadeh
    Farhad Arghavani
    Masoud Mokhtari
    Transactions of the Indian Institute of Metals, 2021, 74 : 1883 - 1894
  • [2] FSW Welding of Aluminium Casting Alloys
    Pietras, A.
    Rams, B.
    ARCHIVES OF FOUNDRY ENGINEERING, 2016, 16 (02) : 119 - 124
  • [3] Dissimilar welding of Al and Mg alloys by FSW
    Morishige, Taiki
    Kawaguchi, Atsushi
    Tsujikawa, Masato
    Hino, Makoto
    Hirata, Tomotake
    Higashi, Kenji
    MATERIALS TRANSACTIONS, 2008, 49 (05) : 1129 - 1131
  • [4] Welding of dissimilar aluminium alloys
    Luijendijk, T
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2000, 103 (01) : 29 - 35
  • [5] Investigation of the optimal parameters for butt joints in a friction stir welding (FSW) process with dissimilar aluminium alloys
    Harachai, Komsak
    Prasomthong, Suriya
    MATERIALS RESEARCH EXPRESS, 2023, 10 (02)
  • [6] Laser Welding of Dissimilar Aluminium Alloys with Filler Materials
    Luis A. Pinto
    Luisa Quintino
    Rosa M. Miranda
    Phill Carr
    Welding in the World, 2010, 54 : R333 - R341
  • [7] FRICTION STIR SPOT WELDING OF DISSIMILAR ALUMINIUM ALLOYS
    Bozkurt, Yahya
    COMPTES RENDUS DE L ACADEMIE BULGARE DES SCIENCES, 2016, 69 (06): : 785 - 792
  • [8] LASER WELDING OF DISSIMILAR ALUMINIUM ALLOYS WITH FILLER MATERIALS
    Pinto, Luis A.
    Quintino, Luisa
    Miranda, Rosa M.
    Carr, Phill
    WELDING IN THE WORLD, 2010, 54 (11-12) : R333 - R341
  • [9] EMISSION OF NANOPARTICLES DURING FRICTION STIR WELDING (FSW) OF ALUMINIUM ALLOYS
    Gomes, J. F.
    Miranda, R. M.
    Santos, T. J.
    Carvalho, P. A.
    JOURNAL OF TOXICOLOGY AND ENVIRONMENTAL HEALTH-PART A-CURRENT ISSUES, 2014, 77 (14-16): : 924 - 930
  • [10] A review on friction stir welding (FSW) process for dissimilar aluminium to steel metal systems
    Patel, Manank M.
    Badheka, Vishvesh J.
    WELDING INTERNATIONAL, 2024, 38 (02) : 91 - 115
12345