Influence of particle size distribution on minimum fluidization velocity and bed expansion at elevated pressure

被引:47
|
作者
Feng, Rongtao [1 ,2 ]
Li, Junguo [1 ]
Cheng, Zhonghu [1 ]
Yang, Xin [3 ]
Fang, Yitian [1 ]
机构
[1] Chinese Acad Sci, State Key Lab Coal Convers, Inst Coal Chem, Taiyuan 030001, Shanxi, Peoples R China
[2] Univ Chinese Acad Sci, Beijing 100039, Peoples R China
[3] Univ Sheffield, Dept Mech Engn, Sheffield S10 2TN, S Yorkshire, England
关键词
Gas-solid fluidization; Particle size distribution; Minimum fluidization velocity; Bed expansion; Pressure; BINARY-MIXTURE; GAS; TEMPERATURES; REACTORS; SYSTEMS; PHASE; FLOW;
D O I
10.1016/j.powtec.2017.07.024
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
This paper presents an experimental study on the effects of elevated pressure and particle size distribution (PSD) on the minimum fluidization velocity (U-mf) and the bed expansion. It was developed with Geldart B and D-type polystyrene particles. Four wide PSDs and five narrow PSDs were investigated. The four wide PSDs studied included a Gaussian distribution, a flat distribution, a ternary mixture, and a binary mixture, all with the same mean diameters. Operation pressure ranged from 0.1 MPa (absolute pressure) to 2.7 MPa. The results revealed that the U(mf)s of the wide PSDs were lower than that of the reference narrow PSD with the same diameter at pressures exceeding 0.3 MPa. The segregation tendency of wide PSDs decreases with the increase in the operating pressure. The four wide PSDs had obviously different U(mf)s at pressures below 0.9 MPa; however, this difference in the Units was gradually reducing with a further increase in the pressure (>0.9 MPa). The bed expansion increased with increasing the pressure at same excess fluidized gas velocity. Correlations basing on experimental data were proposed in order to predict the U-mf and bed expansion for the narrow PSD at elevated pressures, and three correlations were investigated for predicting the U-mf of wide PSD. (C) 2017 Elsevier B.V. All rights reserved.
引用
收藏
页码:27 / 36
页数:10
相关论文
共 50 条
  • [21] Correlation for predicting minimum fluidization velocity with different size distributions and bed inventories at elevated temperature in gas-solid fluidized bed
    Korkerd, Krittin
    Soanuch, Chaiwat
    Zhou, Zongyan
    Piumsomboon, Pornpote
    Chalermsinsuwan, Benjapon
    ADVANCED POWDER TECHNOLOGY, 2022, 33 (03)
  • [22] Minimum fluidization velocity of particles with different size distributions at elevated pressures and temperatures
    Shao, Yingjuan
    Li, Zhaozhi
    Zhong, Wenqi
    Bian, Zhoufeng
    Yu, Aibing
    CHEMICAL ENGINEERING SCIENCE, 2020, 216 (216)
  • [23] Minimum fluidization velocity of particles with wide size distribution at high temperatures
    Ma Jiliang
    Chen Xiaoping
    Liu Daoyin
    POWDER TECHNOLOGY, 2013, 235 : 271 - 278
  • [24] THE EFFECT OF PRESSURE ON MINIMUM FLUIDIZATION VELOCITY
    ROWE, PN
    CHEMICAL ENGINEERING SCIENCE, 1984, 39 (01) : 173 - 174
  • [25] Effect of Pressure on Minimum Fluidization Velocity
    Zhu Zhiping~*Na Yongjie Lu QinggangInstitute of Engineering Thermophysics
    Journal of Thermal Science, 2007, (03) : 264 - 269
  • [26] Effect of pressure on minimum fluidization velocity
    Zhu Zhiping
    Na Yongjie
    Lu Qinggang
    Journal of Thermal Science, 2007, 16 : 264 - 269
  • [28] Effect of pressure on minimum fluidization velocity
    Zhu Zhiping
    Na Yongjie
    Lu Qinggang
    JOURNAL OF THERMAL SCIENCE, 2007, 16 (03) : 264 - 269
  • [29] BED EXPANSION IN HIGH-VELOCITY FLUIDIZATION
    AVIDAN, AA
    YERUSHALMI, J
    POWDER TECHNOLOGY, 1982, 32 (02) : 223 - 232
  • [30] MINIMUM FLUIDIZATION VELOCITY OF MULTICOMPONENT PARTICLE MIXTURES
    ROWE, PN
    NIENOW, AW
    CHEMICAL ENGINEERING SCIENCE, 1975, 30 (11) : 1365 - 1369