Formation mechanism and reliability of Cu6Sn5 textures formed in-between liquid Sn and (111)/(001) Cu single crystals

被引：0
|
作者：
Yao, Shun [1 ]
Wang, Xuelin [2 ]
Yang, Shihua [2 ]
Zhang, Zhihao [1 ]
Cao, Huijun [3 ]
机构：
[1] Xiamen Univ, Coll Mat, Fujian Key Lab Adv Mat, Xiamen 361005, Peoples R China
[2] Shanghai Aerosp Equipment Mfg, Shanghai 200245, Peoples R China
[3] Xiamen City Univ, Sch Mech & Automat Engn, Xiamen 361005, Peoples R China
来源：
2017 18TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT) | 2017年
关键词：
Cu single crystal; Cu6Sn5; formation mechanism reliability; SHEAR-STRENGTH; SOLDER JOINTS; PHASE; ORIENTATION;
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
Formation mechanism and reliability of the CU6Sn5 textures formed in-between the liquid SnCu0.7 solder and (111) /(001) Cu single crystals were studied in this paper. Regular arrays of the roof-type CU6Sn5 grains with the fixed intersecting angles were generated on both types of Cu single crystals after soldering at 250 degrees C for 1 min. The formation mechanism of these CU6Sn5 roofs was confirmed to be a hexagonal-rod-type growth mode due to morphology and orientation analyses. In addition, based on the shear tests of the actual solder joints, the CU6Sn5 textures formed on (111)/(001) Cu single crystals were affirmed to be ideally suitable for use as the reliable interfacial connection layers to resist shear failures in electronic packaging.
引用
收藏
页码：444 / 447
页数：4
相关论文
共 50 条
  • [21] On the thickness of Cu6Sn5 compound at the anode of Cu/liquid Sn/Cu joints undergoing electromigration
    Anil Kunwar
    Haoran Ma
    Haitao Ma
    Bingfeng Guo
    Zhixian Meng
    Ning Zhao
    Mingliang Huang
    Journal of Materials Science: Materials in Electronics, 2016, 27 : 7699 - 7706
  • [22] On the thickness of Cu6Sn5 compound at the anode of Cu/liquid Sn/Cu joints undergoing electromigration
    Kunwar, Anil
    Ma, Haoran
    Ma, Haitao
    Guo, Bingfeng
    Meng, Zhixian
    Zhao, Ning
    Huang, Mingliang
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2016, 27 (07) : 7699 - 7706
  • [23] Growth Behavior of Cu6Sn5 Grains at Sn/(001)Cu Interface by Imposing Temperature Gradient
    Zhao, Ning
    Chen, Shi
    Liu, Chunying
    Zhong, Yi
    Ma, Haitao
    Wang, Yunpeng
    2018 19TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2018, : 603 - 606
  • [24] Thermal expansion of Cu6Sn5 and (Cu,Ni)6Sn5
    Mu, Dekui
    Read, Jonathan
    Yang, Yafeng
    Nogita, Kazuhiro
    JOURNAL OF MATERIALS RESEARCH, 2011, 26 (20) : 2660 - 2664
  • [25] Growth behavior of Cu6Sn5 grains formed at an Sn3.5Ag/Cu interface
    Yang, Ming
    Li, Mingyu
    Wang, Ling
    Fu, Yonggao
    Kim, Jongmyung
    Weng, Lvqian
    MATERIALS LETTERS, 2011, 65 (10) : 1506 - 1509
  • [26] Thermal expansion of Cu6Sn5 and (Cu,Ni)6Sn5
    Dekui Mu
    Jonathan Read
    Yafeng Yang
    Kazuhiro Nogita
    Journal of Materials Research, 2011, 26 : 2660 - 2664
  • [27] Formation and growth mechanism of thin Cu6Sn5 films in Sn/Cu and Sn-0.1AlN/Cu structures using laser heating
    Liang, Zhang
    SOLDERING & SURFACE MOUNT TECHNOLOGY, 2024, 36 (05) : 268 - 275
  • [28] Synthetic and formation mechanism of Cu6Sn5 single-crystal layer on Cu pad for UBM application
    Zhang, Zhihao
    Cao, Huijun
    Li, Mingyu
    2013 14TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2013, : 347 - +
  • [29] Textured growth of Cu6Sn5 grains formed at a Sn3.5Ag/Cu interface
    Li, Mingyu
    Yang, Ming
    Kim, Jongmyung
    MATERIALS LETTERS, 2012, 66 (01) : 135 - 137
  • [30] Initial stage of isothermal wetting of bulk Cu6Sn5, Cu3Sn and Cu substrates by liquid Sn
    Liashenko, O. Y.
    Hodaj, F.
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2019, 30 (02) : 1838 - 1849
12345