Optimization of Machining Parameters for CNC Turning of different Materials

被引：6
|
作者：
Saini, Surendra Kumar [1 ]
Pradhan, Sharad Kumar [1 ]
机构：
[1] Natl Inst Tech Teachers Training & Res, Dept Mech Engn, Bhopal 462002, MP, India
来源：
DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH | 2014年 / 592-594卷
关键词：
CNC turning parameters; Optimization; Surface roughness; Fractional Factorial Design Method;
D O I：
10.4028/www.scientific.net/AMM.592-594.605
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This paper proposes an experimental investigation of the most influencing machining parameters like spindle speed, feed rate and depth of cut on CNC turning of three metals viz. 316L Stainless steel, EN24 alloy steel and Ti 6 Al 4V alloy. Fractional factorial design with orthogonal array [L-9 (3(3))] is employed for the optimization of these turning process parameters. All experiments were carried out using EMCO CNC 250 Turn machine with carbide cutting tool. The comparison revealed that feed rate and depth of cut are the most significant turning factors on surface roughness followed by spindle speed for these three metals.
引用
收藏
页码：605 / 609
页数：5
相关论文
共 50 条
  • [31] Optimization of wood machining parameters using artificial neural network in CNC router
    Cakmak, Ali
    Malkocoglu, Abdulkadir
    Ozsahin, Sukru
    [J]. MATERIALS SCIENCE AND TECHNOLOGY, 2023, 39 (14) : 1728 - 1744
  • [32] Simulation-based optimization of CNC interpolator parameters for machining accuracy improvement
    Chan-Young Lee
    Soon-Hong Hwang
    Byung-Kwon Min
    [J]. The International Journal of Advanced Manufacturing Technology, 2022, 119 : 3757 - 3770
  • [33] Optimization of machining parameters for product quality and productivity in turning process of aluminum
    Abolghasem, Sepideh
    Mancilla-Cubides, Nicolás
    [J]. Ingenieria y Universidad, 2022, 26
  • [34] Simulation-based optimization of CNC interpolator parameters for machining accuracy improvement
    Lee, Chan-Young
    Hwang, Soon-Hong
    Min, Byung-Kwon
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 119 (5-6): : 3757 - 3770
  • [35] Multi-Response Optimization Of Machining Parameters In CNC Turning Of AISI 316L Stainless Steel Using MQL Nano fluids
    Sathishkumar, S. D.
    Rajmohan, T.
    [J]. 3RD INTERNATIONAL CONFERENCE ON MATERIALS AND MANUFACTURING ENGINEERING 2018, 2018, 390
  • [36] Taguchi design and response surface methodology based analysis of machining parameters in CNC turning under MQL
    Sarikaya, Murat
    Gullu, Abdulkadir
    [J]. JOURNAL OF CLEANER PRODUCTION, 2014, 65 : 604 - 616
  • [37] Optimization of machining process parameters in CNC turning process of IS2062 E250 Steel using coated carbide cutting tool
    Krishnan, B. Radha
    Ramesh, M.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2020, 21 : 346 - 350
  • [38] Optimization of the Machining parameter of LM6 Alminium alloy in CNC Turning using Taguchi method
    Arunkumar, S.
    Muthuraman, V.
    Baskaralal, V. P. M.
    [J]. INTERNATIONAL CONFERENCE ON EMERGING TRENDS IN ENGINEERING RESEARCH, 2017, 183
  • [39] Optimization with Taguchi Method of Influences on Surface Roughness of Cutting Parameters in CNC Turning Processing
    Ozdemir, Mustafa
    [J]. MECHANIKA, 2019, 25 (05): : 397 - 405
  • [40] Grey Fuzzy Multiobjective Optimization of Process Parameters for CNC Turning of GFRP/Epoxy Composites
    Vasudevan, Hari
    Deshpande, Naresh C.
    Rajguru, Ramesh R.
    [J]. 12TH GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT (GCMM - 2014), 2014, 97 : 85 - 94
12345