Optimization of Machining Parameters for CNC Turning of different Materials

被引：6
|
作者：
Saini, Surendra Kumar [1 ]
Pradhan, Sharad Kumar [1 ]
机构：
[1] Natl Inst Tech Teachers Training & Res, Dept Mech Engn, Bhopal 462002, MP, India
来源：
DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH | 2014年 / 592-594卷
关键词：
CNC turning parameters; Optimization; Surface roughness; Fractional Factorial Design Method;
D O I：
10.4028/www.scientific.net/AMM.592-594.605
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This paper proposes an experimental investigation of the most influencing machining parameters like spindle speed, feed rate and depth of cut on CNC turning of three metals viz. 316L Stainless steel, EN24 alloy steel and Ti 6 Al 4V alloy. Fractional factorial design with orthogonal array [L-9 (3(3))] is employed for the optimization of these turning process parameters. All experiments were carried out using EMCO CNC 250 Turn machine with carbide cutting tool. The comparison revealed that feed rate and depth of cut are the most significant turning factors on surface roughness followed by spindle speed for these three metals.
引用
收藏
页码：605 / 609
页数：5
相关论文
共 50 条
  • [21] Optimization of machining parameters for EN8D carbon steel by Taguchi's orthogonal array experiments in CNC turning
    Patel, Rudra
    Patel, Sarvam
    Patel, Parth
    Parmar, Pratik
    Vohra, Jishan
    MATERIALS TODAY-PROCEEDINGS, 2021, 44 : 2325 - 2329
  • [22] Optimization of cutting tool geometry and machining parameters in turning process
    Saravanamurugan, S.
    Sundar, B. Shyam
    Pranav, R. Sibi
    Shanmugasundaram, A.
    MATERIALS TODAY-PROCEEDINGS, 2021, 38 : 3351 - 3357
  • [23] Optimization of Machining Parameters in Steel Turning Operation by Taguchi Method
    Abhang, L. B.
    Hameedullah, M.
    INTERNATIONAL CONFERENCE ON MODELLING OPTIMIZATION AND COMPUTING, 2012, 38 : 40 - 48
  • [24] Optimization of machining Nilo 36 superalloy parameters in turning operation
    Basmaci, Gueltekin
    OPEN CHEMISTRY, 2023, 21 (01):
  • [25] Effect of machining parameters in turning under different cooling conditions
    Jothiprakash, V. M.
    Babu, M. Naresh
    Sezhian, M. Vetrivel
    Anandan, V.
    MATERIALS AND MANUFACTURING PROCESSES, 2024, 39 (05) : 663 - 676
  • [26] EFFECT OF CNC MACHINING PARAMETERS ON SURFACE QUALITY OF DIFFERENT KIND OF WOOD
    Ibrisevic, A.
    Busuladzic, I
    Mihulja, G.
    Obucina, M.
    Hajdarevic, S.
    Smajic, S.
    CURRENT TRENDS AND CHALLENGES FOR FOREST-BASED SECTOR: CARBON NEUTRALITY AND BIOECONOMY, 2023, : 270 - 274
  • [27] Evaluation of tool wears mechanism considering machining parameters and performance parameters for titanium alloy in turning operation on CNC
    Ingle, Sushil
    Raut, Dadarao
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2024, 10 (03) : 1380 - 1400
  • [28] Ultra precision machining on a CNC diamond turning machine
    Lamb, J
    LASER METROLOGY AND MACHINE PERFORMANCE V, 2001, : 209 - 217
  • [29] Optimization of CNC Turning Parameters on Aluminum Alloy 6063 using TaguchiRobust Design
    Saravanakumar, A.
    Karthikeyan, S. C.
    Dhamotharan, B.
    Kumar, V. Gokul
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (02) : 8290 - 8298
  • [30] Optimization of CNC cutting parameters by the electrical power method: Turning case.
    Gutierrez, E.
    Calderon, J.
    MANUFACTURING ENGINEERING AND MATERIALS HANDLING, 2005 PTS A AND B, 2005, 16 : 675 - 681
12345