Optimization of Machining Parameters for CNC Turning of different Materials

被引：6
|
作者：
Saini, Surendra Kumar [1 ]
Pradhan, Sharad Kumar [1 ]
机构：
[1] Natl Inst Tech Teachers Training & Res, Dept Mech Engn, Bhopal 462002, MP, India
来源：
DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH | 2014年 / 592-594卷
关键词：
CNC turning parameters; Optimization; Surface roughness; Fractional Factorial Design Method;
D O I：
10.4028/www.scientific.net/AMM.592-594.605
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This paper proposes an experimental investigation of the most influencing machining parameters like spindle speed, feed rate and depth of cut on CNC turning of three metals viz. 316L Stainless steel, EN24 alloy steel and Ti 6 Al 4V alloy. Fractional factorial design with orthogonal array [L-9 (3(3))] is employed for the optimization of these turning process parameters. All experiments were carried out using EMCO CNC 250 Turn machine with carbide cutting tool. The comparison revealed that feed rate and depth of cut are the most significant turning factors on surface roughness followed by spindle speed for these three metals.
引用
收藏
页码：605 / 609
页数：5
相关论文
共 50 条
  • [1] Optimization of CNC Turning Machining Parameters Based on Bp-DWMOPSO Algorithm
    Li, Jiang
    Zhao, Jiutao
    Liu, Qinhui
    Zhu, Laizheng
    Guo, Jinyi
    Zhang, Weijiu
    [J]. CMC-COMPUTERS MATERIALS & CONTINUA, 2023, 77 (01): : 223 - 244
  • [2] Study of machining parameters optimization for different materials in WEDM
    Yunn-Shiuan Liao
    Tzung-Jen Chuang
    Young-Ping Yu
    [J]. The International Journal of Advanced Manufacturing Technology, 2014, 70 : 2051 - 2058
  • [3] Study of machining parameters optimization for different materials in WEDM
    Liao, Yunn-Shiuan
    Chuang, Tzung-Jen
    Yu, Young-Ping
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2014, 70 (9-12): : 2051 - 2058
  • [4] Particle swarm optimization technique for determining optimal machining parameters of different work piece materials in turning operation
    Raja, S. Bharathi
    Baskar, N.
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2011, 54 (5-8): : 445 - 463
  • [5] Particle swarm optimization technique for determining optimal machining parameters of different work piece materials in turning operation
    S. Bharathi Raja
    N. Baskar
    [J]. The International Journal of Advanced Manufacturing Technology, 2011, 54 : 445 - 463
  • [6] Optimization Of Machining Parameters In Cnc Turning Of En45 By Taguchi's Orthogonal Array Experiments
    Irfan, Syed S.
    Kumar, Vijay M.
    Rudresha, N.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2019, 18 : 2952 - 2961
  • [7] Response surface methodology (RSM)-based machining parameter optimization for minimization of burr in CNC turning of materials
    Thandiyappan, Bothiraj
    Lingasamy, Ramesh Kumar
    Kandasamy, Vetrivel Kumar
    Susaimanickam, Joseph Dominic Vijayakumar
    [J]. MATERIA-RIO DE JANEIRO, 2024, 29 (03):
  • [8] Optimization of Machining Techniques in CNC Turning Centre Using Genetic Algorithm
    H. Ganesan
    G. Mohankumar
    [J]. Arabian Journal for Science and Engineering, 2013, 38 : 1529 - 1538
  • [9] Optimization of Machining Techniques in CNC Turning Centre Using Genetic Algorithm
    Ganesan, H.
    Mohankumar, G.
    [J]. ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2013, 38 (06): : 1529 - 1538
  • [10] Experimental Investigations and Optimization of Machining Parameters in CNC Turning of SS304 Using Coolant at 0 °C
    Patil, Pravin
    Karande, Prasad
    [J]. JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 2022, 6 (06):
12345